The April 5th issue of Croissant will feature "LEAN."

Stable inclined design that can be securely leaned against a wall. Supports large sizes of A1 and above with a robust cross-section.

"LEAN" is an aluminum frame with the outer upper, lower, and side parts slanted towards the back. When leaning against a wall, it can provide a wide contact area with the floor, allowing for stable placement. Additionally, when mounted on the wall with brackets, it enables a more profound display effect. It can frame various works, such as photographs, posters, and contemporary art, with a thickness of up to 5mm. Its robust cross-section also accommodates larger sizes of A1 and above. 【Features】 ■ Awarded the Good Design Award in 2019 ■ The inner side has a gentle curve, creating a soft and rich impression ■ A matte coating similar to shot blasting balances the material feel of aluminum with a sense of luxury ■ The front uses UV-cut acrylic, which is resistant to discoloration and degradation of the artwork *For more details, please refer to the "PDF Download" for materials. We also provide documents explaining the basics of frames and points to consider when installing them.

• Spatial Design
• Mural
• Office supplies and stationery

A new aluminum frame that won the 2019 Good Design Award! It has a light impression that seems to float from the wall, making it suitable for interiors in hotels and commercial facilities.

"CUT" is a frame and panel that has a sharp impression with its edges cut off. When viewed from the front, it allows you to focus on the artwork without being overly aware of the frame, and when viewed from an angle, the beveled sides create a light impression as if it is floating from the wall. Despite its slim profile, it can accommodate artworks up to 5mm thick, making it suitable for various pieces such as photographs, posters, and contemporary art. It also serves as an elegant interior frame for hotels, museums, and commercial facilities. 【Features】 ■ Available in large sizes of A1 and above ■ Conveys the texture and luxury of aluminum ■ Accommodates artworks up to 5mm thick despite its slim design ■ Winner of the Good Design Award 2019 ■ UV acrylic used for all sizes *For more details, please refer to the PDF document or feel free to contact us.

• Spatial Design
• Signs, banners, lanterns, and curtains
• Office supplies and stationery

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.