First exhibition at the Smart Building EXPO.

The iris recognition device, boasting high reliability and the world's top market share, solves the challenges of existing access control system authentication devices.

**Advantages of Iris Authentication** While it takes slightly longer to authenticate compared to ID card systems, it offers significantly higher security due to the extremely low acceptance rate of others and the lack of reliance on cards. On the other hand, in environments with a high turnover of authenticated individuals, such as construction sites, call centers, food factories, and educational settings, using iris authentication alone eliminates the need for expensive ID card issuance, resulting in substantial cost savings. **IrisAccess iCAM7000** The IrisAccess iCAM7000 from IrisID is a world-class fourth-generation iris authentication product. It achieves fast practical authentication speeds, an extremely low acceptance rate of others, a stress-free rejection rate for the individual, and user-friendly hands-free authentication, all at a reasonable price. By adopting a genuine biometric authentication system, it is possible to reduce personal ID authentication costs without strain.

• Entrance/exit management and personal identification system

Face detection AI-equipped temperature measurement device [Miharu] monitors the risk of infection spread in facilities with accurate temperature measurement! Comfortable operation with a Japanese interface.

"MIHARU" is an 8-inch tablet-type facial recognition and temperature measurement device. It uses AI to quickly and accurately recognize the position for measuring facial temperature and displays the results. If the measured temperature exceeds a preset upper limit during the temperature check, it can issue a warning through display and sound. Additionally, if the mask-wearing confirmation function is enabled, it can provide a warning in case a mask is not worn. The application developed in collaboration with the manufacturer supports users with easy-to-understand Japanese for both display and voice guidance. Regarding pricing, options are available not only for a standard purchase but also for rental. Even if temperature measurement is no longer necessary, the device can be upgraded to be integrated into an entry and exit management system as a facial recognition reader.

• Entrance/exit management and personal identification system

A high-precision facial recognition reader equipped with a temperature measurement function! It enables quick and reliable temperature checks and entry/exit management when entering facilities to prevent the spread of infections and other diseases.

FaceID offers reliable and fast facial recognition at a reasonable price. By registering and authenticating individuals through their faces, it is possible to reduce security risks such as the loss of IC cards and the leakage of PIN numbers. Furthermore, combination authentication with IC cards and PIN numbers is also possible, meeting high security needs. The temperature measurement function quickly measures the surface temperature of the face using AI. By setting a maximum temperature, it can trigger an alarm. When displaying thermal images, it is also possible to identify areas with higher temperatures. Additionally, the mask verification function can confirm whether a mask is being worn. All functions can be easily set up using an 8-inch wide and easy-to-read touch panel, along with displays and voice guidance in Japanese.

• Entrance/exit management and personal identification system

The pinnacle of companion prevention security measures. It reliably meets the strict security requirements of important facilities.

The Orthos PIL is an interlock that combines two doors, one inside and one outside, in a capsule-shaped housing. The interlock ensures that these two doors do not open simultaneously except in emergencies. Authentication is performed at the outer door to enter the housing, and re-authentication is conducted inside the housing to enter through the inner door. During this process, it checks that there is only one authenticator inside the housing. It is a system that allows entry after passing through multiple checks, including passive sensors, floor mat sensors, and weight sensors. It is ideal for building security in facilities that require high security, such as nuclear power plants, military facilities, financial institutions, various research laboratories, data centers, and airports. It can be combined with domestic and international access control systems, card readers, biometric authentication readers, and more.

• Entrance/exit management and personal identification system

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK