Japan Home Show Future Seed Award "Titanic Wins"

Installation is one-touch! The magic ring tightens the bottle and prevents it from loosening! It prevents the reduction of strength at the joints and maintains the seismic resistance of new constructions over the long term.

"Taitonic" is a washer that follows wood shrinkage and does not loosen. It adapts to wood shrinkage with internal springs and tightens using the "wedge" effect of the magic ring. The seismic performance of a house is based on the premise that structural joints are firmly connected. "Taitonic" does not degrade the inherent seismic performance of the house. Additionally, "Taitonic" converts the vibrations acting on the house into a tightening force with the magic ring. This means that it does not loosen under continuous vibrations from earthquakes, typhoons, or road traffic. 【Features】 ■ Tightens in response to wood shrinkage ■ Converts vibrations into a tightening force with the magic ring ■ Makes it difficult for the house to sway from earthquakes, vehicle vibrations, or typhoon winds ■ Withstands large forces with light tightening pressure *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies
• Safety and consumables
• Earthquake-resistant construction method

Can be used for medium to large structures. Strong against vibrations! Easy to install! No need for re-tightening! Seismic-resistant washer "Titanic" that accommodates various joints.

"Titanic" converts the vibrations at the joints into a tightening force with the magic ring. It does not loosen even under continuous vibrations. 【Features】 ○ Converts vibrations into a tightening force with the magic ring ○ Makes houses less likely to sway from earthquakes, vehicle vibrations, or typhoon winds ○ Withstands large forces with a light tightening force You can see examples of its use in large-scale wooden structures at the joints. *For more details, please refer to the PDF materials or feel free to contact us.

• Other store equipment and supplies
• Safety and consumables
• Earthquake-resistant construction method

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI