[Exhibition Participation] IPF JAPAN 2020 (International Plastic Fair) Virtual Booth Exhibition

A high-end twin-screw extruder equipped with infinite possibilities for various fields.

A twin-screw extruder used to enhance the added value of plastic raw materials is referred to as a compounding extruder. Our company manufactures the "TEX" series of twin-screw extruders to meet the demands for high performance and high quality. The TEX is utilized not only for traditional inorganic fillers, masterbatch compounds, polymer alloys, and GF/CF compounds but also for a wide range of applications including reactions, degassing, dehydration, biomass compounds, long fiber compounding, and supercritical carbon dioxide compounding. By incorporating JSW's unique technologies that dramatically improve compounding performance (compounding screws, compounding cylinders, high-distribution compounding screws) and new solutions for increased discharge capacity (Side Feed Deaerator), we guide our customers into new realms that traditional machines could not achieve.

• paint
• glue
• Biomass fuel production equipment

■Shortened delivery time ■Variety of screw shapes ■Quality assurance

The screw piece of the extruder is a consumable that wears out with age and use. Wear of the screw piece can lead to a decrease in processing capacity and deterioration of product quality, which may result in serious issues such as breakage. Therefore, the screw piece is an important component that must be replaced at the appropriate time. At JSW, we stock screw pieces in frequently used shapes, allowing us to deliver them promptly during regular maintenance or in case of damage.

• paint
• glue
• Biomass fuel production equipment

Improving the productivity of powder raw materials! It is used in the section that transports the raw materials of the extruder screw.

The "SFD" is a device that solves the problem of low bulk density fillers significantly reducing the conveying efficiency of the extruder screw and limiting the processing capacity of the extruder. By increasing the bulk density of the raw materials within this device, the conveying efficiency of the extruder screw can be improved, thereby enhancing the processing capacity of the extruder. Our technology center has various testing facilities, including extruders and SFDs. 【Features】 ■ Improves the productivity of powdered raw materials ■ By increasing the bulk density of the raw materials, the conveying efficiency of the extruder screw is enhanced ■ Used in the section that conveys raw materials for the extruder screw ■ Exhaust within the extruder system is conducted through a filter ■ Applicable to extruders with screw sizes ranging from 26.5mm to 443mm *For more details, please refer to the PDF materials or feel free to contact us.

• paint
• glue
• Biomass fuel production equipment

Adoption of a hanging cutter unit! It is possible to significantly expand the workspace on the floor.

The "SDC" is a compact UWC device that incorporates new technologies for small-capacity machines, advancing miniaturization and high functionality. With the adoption of a cutter holder featuring automatic self-alignment, tedious alignment adjustments are no longer necessary, ensuring stable pellet shapes even during long-term operation. The use of a suspended cutter unit significantly expands the working space on the floor. 【Features】 ■ The automatic pressing mechanism eliminates the need for blade adjustment during operation. ■ By controlling the pressing force consistently, it is possible to manage the wear rate of the blades. ■ The longevity of the cutter blades is expected to improve. ■ The connection between the cutter unit and the circulation box uses a one-touch clamp system. ■ Three processing capacities (kg/h) are available: Max. 100/1000/2500. *For more details, please refer to the PDF materials or feel free to contact us.

• paint
• glue
• Biomass fuel production equipment

We will be exhibiting our kintone plugins "Mojitori" and "StockNaut" at the following event. 【kintone Solutions Day Osaka】 Date: July 7, 2026 (Tuesday) 13:00 - 17:30 Venue: MyDome Osaka 1st Floor Exhibition Hall (A) Cost: Free kintone Solutions Day is an event where kintone plugin and integration manufacturers gather, allowing participants to experience the extensibility of kintone all at once. You can compare and consult on the latest solutions that further evolve kintone, such as business efficiency and system integration, through actual demos and direct explanations! ♦ Recommended for: - Those who find the standard features of kintone insufficient - Those who want to speak directly with plugin manufacturers - Those who want to consult about SaaS business Following the event held in Tokyo in February, this time it will be held in Osaka. We look forward to your visit!

We will be exhibiting for the first time at the "7th Kyushu Heat Countermeasure Exhibition" held on June 24 and 25. We will showcase Sanko's summer products, including refrigerated clothing, neck coolers, and belts that turn into fan-equipped wear. This will be a valuable opportunity for you to actually handle the products. We will also be displaying the 【Electric Stair Cart】, which allows for easy movement up and down stairs while carrying loads. We welcome any inquiries or consultations regarding its introduction. We look forward to your visit. 7th Kyushu Heat Countermeasure Exhibition ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Date: June 24 (Wednesday) and 25 (Thursday), 2026 Time: 24th 10:00 AM - 5:00 PM, 25th 10:00 AM - 4:00 PM Venue: Marine Messe Fukuoka Booth Number: AM-16

Daitō Shikō Co., Ltd. will be exhibiting at the "5th Oshi Katsu EXPO Summer" held at Tokyo Big Sight from June 24, 2026 (Wednesday). At the exhibition venue, we plan to showcase popular sticker albums, foil-pressed goods, items usable at collaboration cafes, pull-back cars, and more. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

We exhibited at EE Tohoku '26 (Yume Messe Miyagi) held on June 3rd and 4th, 2026. The technology we exhibited is as follows: - Crushed stone utilization cage method (saisekibako)

Toby Technology Co., Ltd. will be exhibiting at the "Problem-Solving EXPO 2026 Small and Medium Enterprises Tech Fair in Kyushu 2026" held at the Kitakyushu Messe. At our booth (T-04), we will introduce skill inheritance and education using eye tracking (gaze measurement). Eye tracking visualizes the "intuition and tips" of skilled workers, contributing to the reduction of training periods in visual inspections and minimizing the oversight of defective products, as well as subsequent education and evaluation. On the day of the event, we will have a wearable eye tracker (glasses-type gaze measurement device) available for demonstration. Depending on your challenges and interests, we will introduce the optimal ways to utilize this technology, so please feel free to stop by and consult us if you have any questions or concerns. We sincerely look forward to your visit. <Visitor registration here> "Problem-Solving EXPO 2026 Small and Medium Enterprises Tech Fair in Kyushu 2026" https://kyushu-tf.solution-expo.jp/