★★Web Exhibition Participation★★★ Keif will participate in the Fukui Construction Technology Online Fair 2020.

It's called "Sanbo" because it's three bars! It's a simple spraying method framework using three rebar!

This is a type that uses three rebar rods for the Easy Shelf method of simple spray application frame construction. The Easy Shelf method is conducted under the association system, but if you are considering joining the association in the future, it is also possible to sell it in the form of a trial construction. NETIS Registration Number: KK-160021-VE 【Simple Spray Adhesive Frame - Easy Shelf Method Sanbo Type】 1. The punched steel plate structure is designed to be strong against deformation from external forces and exhibits an extremely high holding capacity in relation to the specified rebar positions. 2. It can be stacked for transportation, improving work efficiency. For more details, please contact us or download the catalog.

• Special Construction Method

Extremely high holding capacity for the rebar position in the simple spray application method framework!

This is a glass stand type that uses four rebar rods, designed for the purpose of creating green slopes and disaster prevention, under the Easy Shelf method of simple spraying frame construction. NETIS Registration Number: KK-160021-VE **Features of the Easy Shelf Method Power Stand:** 1. The punched steel plate structure is designed to be strong against deformation from external forces, exhibiting an extremely high holding capacity relative to the specified rebar positions in the design. 2. It can be stacked for easy transport, enhancing work efficiency. **Features of the Easy Shelf Method Glass Stand:** 1. The glass stand, with its punched steel plate structure, is strong against deformation from external forces and demonstrates an extremely high holding capacity relative to the specified rebar positions in the design. 2. The outer dimensions of the glass stand are designed to ensure a cover of 40 mm at all points relative to the finished shape, helping to reduce the occurrence of cracks after spraying. 3. The glass stand features numerous openings and cuts that eliminate mortar edge cutting and facilitate easy binding, resulting in excellent workability. The glass stand can be stacked, making it easy to transport.

• Slope protection material
• Earth retaining wall/foundation reinforcement
• Civil Engineering Method

A spray method frame that can be constructed anywhere in the country, designed for cost reduction! It maintains the strength of conventional spray method frames and simple spray method frames while improving workability and reducing costs.

NETIS Registration Number CG-100009-A. 【Advantages of Using the RT Frame Method】 1. Minimal spraying loss and easy construction. Instead of finishing in a dome shape like conventional simple formwork, it is finished in a triangular shape. The sprayed mortar naturally forms into a triangular shape, resulting in minimal material loss and allowing anyone to easily carry out the construction. 2. Faster drafting and performance measurement due to the management of the RT Frame Method's development drawings. 3. Significant cost reduction when used in conjunction with rebar insertion work! It can be used in combination with rebar insertion work. This combination serves as a restraint for slopes, allowing for a significant reduction in costs compared to conventional methods. 4. Adjustable frame span and rebar quantity according to site needs! The RT Frame Method offers five standard types, but it can be adjusted for frame span and rebar quantity based on site needs, pursuing both safety and cost efficiency. *For stability calculations and estimates, please consult our company. For more details, please contact us or download the catalog to view.

• Earth retaining support
• Earthworks
• Pile and foundation work

Comfortable even during long hours of work! The body belt and wide back side belt support the lower back and hips.

The "Inclined Surface Work Belt" is a comfortable safety harness designed for use on slopes during long hours of work. It supports the body with two belts: a waist belt and a wide back-side belt that supports the lower back and hips. This design allows the weight of the worker, along with heavy tools such as spray nozzles, to be distributed over a wide area while sitting, making it suitable for long hours of work on steep inclines. 【Features】 ■ Reduces strain on the lower back and hips with the use of a wide back-side belt ■ Comfortable even during long hours of work *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Other Management Services
• others

This is a popular harness-type fall arrest device series by Fujii Denko, designed for work on inclined surfaces.

At K-F, we offer harness-type fall arrest devices and their optional equipment, as well as various items to protect workers during slope construction, in accordance with the revisions to labor safety and health regulations. 【Features of the slope work harness (manufactured by Fujii Denko)】 ◆ There are two types of new harnesses for slope work: the integrated harness (TH-600) and the separable harness (TH-601). * The separable harness (TH-601) can be converted into an integrated harness using a separately sold connecting fitting (CB-SF1). ◆ Equipped with a chest D-ring that allows for easy visual connection of the fall prevention lanyard hook. ◆ The adoption of a horizontal thigh belt design minimizes the likelihood of the thigh buckle getting caught between the thigh and back side belt, providing less constriction and greater mobility. ◆ The buckle on the harness body features a lightweight one-touch design with an easy-to-use anti-mis-insertion function for easy attachment and detachment. * For more details, please refer to the catalog or feel free to contact us.

• Safety and consumables
• Other Management Services
• others

Introducing a case study of "An'ei Net" installation in rock fragmentation work.

The "An'ei Net" is a safety net for slopes. To protect workers from falling rocks during work and to prevent crushed stones from rolling down, we will introduce examples of the installation of the An'ei Net with photographs. In this case, the An'ei Net is also used to protect against stones that may fall from the work site and reach downstream houses or roads. 【Example】 ■ Client: Ministry of Land, Infrastructure, Transport and Tourism ■ Project Name: Maintenance Work for Nagai Dam in Yamagata Prefecture *For more details, please refer to the external link page or feel free to contact us.

• Safety Supplies

Are measures in place to protect important workers from falling objects in the work environment? The components are compact, easy to carry and install, and easy to introduce!

The Ministry of Health, Labour and Welfare has revised the safety and health regulations, and Article 539-5 states that there should be a "work plan." This involves conducting and recording a survey of the work site, creating a work plan based on that survey, and informing the relevant workers to carry out the work accordingly. Are measures in place in your work environment to protect important workers from falling objects? Our proposal is the slope safety net "An'ei Net." 【Features】 - Absorbs rockfall energy due to the flexibility of high-strength raschel knitted fabric and the effectiveness of high-strength, high-elasticity rope. - Easily installable on standing trees. - Components are compact, making transportation and installation easy. - Reusable if there are no significant external damages. *For more details, please contact us or download the PDF.

• Safety Supplies

It features a steel plate punching structure, making it strong against deformation from external forces and demonstrating extremely high holding power relative to the rebar position! *It will be exhibited at the Wakayama Prefecture Kensanpin.

The glass stand has a punched steel plate structure, making it strong against deformation from external forces, and it exhibits extremely high holding power against the specified rebar positions in the design. The outer dimensions are designed to ensure that a cover of 40 mm is maintained at all points relative to the finished shape, which helps reduce the occurrence of cracks after spraying. The numerous openings and cuts provided eliminate the edge cutting of the mortar, making it easy to bind and excellent in workability. It can be stacked, making it easy to transport. ＊＊＊＊ Wakayama Prefecture registered product registration number Glass Stand Type A ... R03-1235 Glass Stand Type B ... R03-1236 *For more details, please refer to the PDF or contact us.

• Gunpowder
• Earth retaining wall/foundation reinforcement
• Concrete construction

Non-absorbent fiber visibility rope for slope construction.

Due to the lack of water-absorbing fibers, there is no hardening of the rope from moisture absorption. There is no difference in tensile strength due to wet and dry conditions. Since it is a yellow rope, it has good visibility even in heavy snowfall areas, and because it uses non-water-absorbing fibers, the rope is less likely to freeze.

• Earth retaining wall/foundation reinforcement
• Earthworks
• Pile and foundation work

You can adjust the descent amount while applying weight to the main line! Fall arrest equipment for high-altitude work.

The "Lollipop" is a grip device used when spraying concrete, allowing the user to support the nozzle with one hand while adjusting the descent speed with the other hand as they descend a slope. Switching between stationary work and descent can be done with a lever operation. Additionally, the descent amount can be adjusted while bearing weight on the main rope with the Lollipop set. 【Features】 ■ Fall arrest device for high-altitude work ■ Lever operation for switching between stationary work and descent ■ Descent amount can be adjusted while bearing weight on the main rope with the Lollipop set *For more details, please refer to the PDF document or feel free to contact us.

• Slope protection material
• Earth retaining wall/foundation reinforcement
• Earth retaining support

Prevent falls and drops! A powerful type of roll lip that can withstand harsh usage on inclined surfaces.

The "Slope Surface Lollipop" is a device manufactured to stabilize the worker's body when used in conjunction with a work belt during slope protection construction, and to prevent falls and slips. It can be used for applications such as concrete spraying and rock net installation. 【Features】 ■ Work belt for slope protection construction ■ Heavy-duty design that withstands harsh use ■ Stabilizes the body ■ Prevents falls and slips *For more details, please refer to the PDF document or feel free to contact us.

• Slope protection material
• Earth retaining wall/foundation reinforcement
• Earth retaining support

For daily safety actions! For creative suggestions! Customization to original colors is also available!

The safety basic action tape is a list tape designed to strongly raise individual awareness of realistic actions regarding the principle of "the three realities" at the site: "on-site, actual items, and reality." 【Features】 ◆ Can be easily cut to 10 centimeters by hand. ◆ Requires minimal effort to attach. ◆ By attaching it to the cuff, it will always be in your line of sight during each task. ◆ By sticking it to each other during face-to-face checks, communication becomes more active. ◆ Customization in the company's original color is also possible. 【Specifications】 30mm x 25m/roll One cut is 10 centimeters, so one roll provides 250 cuts. *Please note that there are no printed catalogs for this product. The catalog is available only as a PDF file.

• Safety and consumables
• Disaster prevention supplies
• others

In the field of food and health food research and development, an increasing number of companies are facing the following challenges: - Difficulty in exploring new functional materials and differentiation themes, leading to a depletion of research topics. - While they are collecting information from conferences and papers, they struggle to translate this into research themes directly related to their products. - They remain limited to competing similar products and follow-up projects, failing to establish uniqueness. - Although there are seeds of ideas, they struggle to elevate them to scientific hypotheses and build the necessary foundations for internal approval. Behind this lies a "wall of execution" that cannot be overcome by traditional information gathering and research processes. In this webinar, we will introduce a new R&D approach to break through these challenges. It is a next-generation research and development scheme that combines AI-driven hypothesis generation, which has achieved results in drug discovery, with scientific hypothesis verification by a food human trial CRO. This will allow for the transformation of vague ideas into scientifically verifiable projects, simultaneously achieving the construction of persuasive foundations for upper management and differentiation development.

Fujikohsuhou Industrial Co., Ltd. will hold an online seminar titled "Tips for Setting Laser Hardening Conditions" on July 20, 2025 (Wednesday). In laser hardening, factors such as output and speed are related to the quality of hardening. We will explain how output and speed are connected to quality factors. This seminar is aimed at those who are looking to start utilizing laser hardening. 【Recommended for】 ■ Those who want to learn about methods for setting laser hardening conditions ■ Those who want to obtain technical information about laser hardening

Take the 'first step' in DX talent development in Fukuoka. We will hold a free seminar where you can learn reskilling strategies that can be applied in the field through case studies and experiences! 'I've become responsible for DX, but I don't know where to start.' This is a participatory seminar aimed at representatives from small and medium-sized enterprises in Fukuoka City, Fukuoka Prefecture, where you can learn the 'first steps' in DX talent development and implementation support. While introducing case studies of representative DX tools such as Power Automate and Power BI, you will experience hands-on sessions with Copilot, allowing you to grasp practical small-start methods that can be implemented on-site. The content also includes specific success stories from the Fukuoka region, along with tips for promoting understanding and advancement within your organization.

We will be exhibiting at INCHEM TOKYO 2025, which will be held at Tokyo Big Sight from September 17 (Wednesday) to September 19 (Friday). This time, we will host many events, including special project stages and mini-seminars. At our booth, we will introduce our solutions and technologies based on the theme of "Sustainable Plant Engineering" from three different concepts. Please be sure to stop by our booth, East Hall 6, K-17.

The Siemens EDA Tech Forum is a technical event aimed at sharing the latest technological trends, case studies, and solutions to challenges with everyone involved in the design and development of silicon systems and electronic systems, while addressing evolving technologies, the densification and complexity of designs, and various design challenges, all while meeting requirements for quality, safety, and reliability. The goal is to deepen insights and networks towards achieving sustainable business. The forum covers a wide range of topics, from advanced design technologies and methods in fields such as 3D ICs, chiplets, chips for AI and ML (machine learning), and IC packaging, to the design, analysis, and collaborative development of electronic systems, including printed circuit boards, across multiple domains, as well as building ecosystems both internally and externally using digital threads. Through case presentations and explanations of design methods by industry leaders, it supports solutions to challenges faced in daily design work from all directions. This is a free technical event that requires pre-registration. We hope you will participate!