We will participate in the IoT Sensor and Device Partner Program of Platt Home Co., Ltd.

The card-type BLE beacon CAD-825 features a design that is easy to carry with a neck strap! It allows for easy IoT tagging of ID cards such as employee badges.

■ Features of the Card-Type BLE Beacon CAD-825 - Can accommodate a credit card-sized card commonly used for ID cards - Designed to attach a standard neck strap - Can advertise an emergency signal by pressing the setting button - Uses a CR2032 button battery, allowing for use for several months to about 2 years - Can operate the beacon only during business hours by setting start and end times with the timer function - Capable of advertising at specified times, enabling health monitoring

• RFID/IC tags
• IoT
• Information and communication equipment and infrastructure

BLE beacon location information system - The BLE beacon sensor network can be utilized in various settings such as stores, hospitals, and factories.

Main Features of the BLE Beacon Location Information System - Presence Detection (Zone Detection) - Passage Detection (Pass Check) The BLE beacon's Bluetooth signal is received by a receiver, and location detection is performed based on the signal strength. "BLE Beacon Sensor Network" - Supported Sensor Beacons Acceleration / Temperature / Humidity / Pressure - Remote Information Acquisition - Sensor information can be combined with various systems to notify smartphones or alert with buzzers and lamps - Collected data can be stored and utilized for analysis ● Notifications for customer service when attached to store products ● Attached to medical devices for in-hospital location detection ● Attached to carts for on-site location management ● Attached to containers for process management ● Attached to various products for inventory management within warehouses ● Quality control using BLE beacons with temperature sensors And more We will propose the optimal solution tailored to the environment, scale, and role of each facility. For details, please download and view the catalog.

• others

BLE-TC420 with a pressure sensor allows for free changes to timers and thresholds! It can transmit based on iBeacon.

We offer BLE Beacons as one of our automatic recognition solutions. The BLE-TC420 is an external pressure sensor type BLE beacon. With the configuration app, you can select the threshold for the pressure sensor and the advertising pattern when pressure is detected. A new timer function has been added, allowing you to set the start and end times for use, as well as advertise at specified times for monitoring. The design of the main unit and the beacon functionality have evolved with added features to make operations more convenient. *For more details, please download the PDF or feel free to contact us.

• Sales promotion and sales support software
• others

"Multi-Advertise BLE Beacon" that supports iBeacon and Eddystone and can broadcast up to 6 types simultaneously.

We handle BLE Beacons as one of our automatic recognition solutions. The multi-advertising BLE Beacon supports both iBeacon and Eddystone, allowing for simultaneous transmission of up to six types of data from a single beacon. Depending on the system or app managing the beacon, you can select the data to be transmitted, enabling a variety of use cases. 【Examples of Multi-Advertising BLE Beacon Utilization】 ■ Monitoring the status of beacons through multi-advertising ■ Advertising from a single beacon at multiple transmission distances ■ Combining an accelerometer with multi-advertising Constantly advertising radio waves and using acceleration detection as a trigger for advertising to detect changes in the target object ■ Combining temperature and humidity sensors with multi-advertising Using one beacon to transmit temperature and humidity, and triggering upper and lower limits with a different ID using iBeacon, etc. *For more details, please download the PDF or feel free to contact us.

• Sales promotion and sales support software
• others

An information management service utilizing BLE Beacons to enhance business operations!

We propose an information management service utilizing BLE Beacons. By leveraging Beacons, it is possible to measure the location of people and objects, as well as detect temperature, humidity, and pressure applied to the Beacon. The information transmitted by the Beacon is stored on a server. By analyzing this information, it can be used to enhance operations such as marketing, management, and customer support. [BLE Beacon IoT Solutions] ■ Smart Office ■ Smart Location ■ Smart Environment *For more details, please download the PDF or feel free to contact us.

• Sales promotion and sales support software
• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI