★★Update★★★ I tried mixing #ToughLightRG and #VulchipMK with reinforced fiber blend.★★★

By mixing Balchip MK and Toughlite RG for mortar spraying, the crack occurrence rate in mortar structures is further reduced!

The mortar reinforcement fiber mixed spraying proposed by K.F. involves mixing polypropylene fibers for mortar reinforcement, "Balchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them to further reduce the crack occurrence rate in mortar structures, thereby enhancing durability and reducing lifecycle costs. By performing mixed spraying of reinforcement fibers on slopes and other areas, a more permanent weed prevention effect can be expected. 【Why is the crack occurrence rate reduced?】 Reinforcement fibers have various characteristics depending on their type, each with its own advantages and disadvantages. "Balchip MK" has a long fiber length and a rough texture, allowing the mortar to cling to each fiber, making it difficult to pull out and providing crack prevention effects (cross-linking effect). Additionally, as the bending toughness increases, it is possible to omit the wire mesh and reduce the spraying thickness. However, because each fiber is long and thick, the adhesion area within the mortar becomes smaller.

• Reinforcement and repair materials
• Slope protection material
• Reinforced earth wall

Construction period and cost reduction possible! This is a lightweight mortar reinforcement fiber that is easy to transport and add compared to steel fibers.

Keif handles products such as polypropylene fibers and vinylon fibers, which are compatible with concrete. "Mortar reinforcement fibers" have good adhesion to cement, making it difficult for cracks to form, and if cracks do occur, they help suppress their growth. The binding force of mortar reinforcement fibers helps prevent the weakening of the structure during freezing, improves freeze-thaw resistance, and enhances long-term durability. 【Benefits of Reinforcement Fibers】 ■ In surface work, the lath application can be omitted, reducing construction time and costs. ■ Lighter than steel fibers, making transportation and addition easier. ■ Being organic fibers, they do not rust and maintain aesthetic appeal. 【Expected Application Scenarios】 ■ Sprayed concrete (surface work, tunnels) ■ Secondary lining ■ Painting work, etc. 【Products Handled】 ■ Kratec ■ Valtip MK, etc. *For more details, please refer to the PDF titled "Essential for Surface Work Contractors! Comparison Table of Mortar Reinforcement Fiber Method and Conventional Methods."

• Mortar and plaster materials
• Slope protection material
• Civil Engineering Method

It is a polypropylene fiber for mortar reinforcement that excels in workability and chemical resistance.

For crack suppression in slope construction! NETIS registration number: KT-100021-VE. ■ Lightweight and excellent workability. With a density of 0.91g/cm3, it is light, making transportation and mixing easy. ■ Excellent chemical resistance and rust-proof. It has superior alkali resistance and durability. ■ Adhesion to concrete. Embossed processing and hydrophilic treatment improve adhesion and enhance bending toughness. ■ Environmentally friendly. It does not produce dioxins (chlorine gas) when burned. 【Proposal: Weed prevention using reinforced fiber mixed spraying】 At K.F., we propose "weed prevention work using mortar reinforced fiber mixed spraying." Mortar reinforced fiber mixed spraying involves mixing polypropylene fibers for mortar reinforcement, "Balchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them to further reduce the crack occurrence rate in mortar structures, thereby enhancing durability and reducing lifecycle costs. By performing reinforced fiber mixed spraying on slopes, such as the toe of the slope, more lasting weed prevention effects can be expected.

• Mortar and plaster materials
• Reinforcement and repair materials
• Earth retaining wall/foundation reinforcement

For suppressing shrinkage cracks in sprayed mortar! Safe material made of polypropylene! Crack-suppressing short fibers that can be mixed with a mixer.

Crack suppression polypropylene short fibers, Toughlight, are processed in bundles, making them less likely to scatter and less likely to pierce the skin. Furthermore, since polypropylene is the material used, no toxic gases are generated during combustion, making it a highly safe crack suppression short fiber. 【Incorporation Effects】 ● Reduces scattering and collapse during spraying ● Reduces shrinkage cracks caused by temperature changes and drying during the curing period 【Excellent Workability】 ● Easily mixed with a conventional mixer ● Generates few fiber balls and has high degradability ● The flow value remains unchanged with the incorporation of Toughlight, maintaining fluidity ● During spraying operations, fibers do not pierce like needles due to rebound There are many other features as well! For more details, please contact us or download the catalog to view. 【Proposal: Weed Control through Reinforced Fiber Mixed Spraying】 K.F. proposes "Weed control construction using mortar reinforced fiber mixed spraying." Please check the basic information section below.

• Fiber wall
• Earth retaining wall/foundation reinforcement
• Pile and foundation work

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On February 10, 2026 (Tuesday), they published a page titled "What is the true nature of 'nice people who are exhausting to interact with'? 'Covert Aggression.'" 'Covert Aggression' refers to behaviors that harm others while pretending to be a 'good person,' as well as aggressive tendencies and personality traits that attempt to manipulate others subtly. The page explains relevant cases, characteristics, causes for falling into this behavior, and ways to cope with it. (Page Overview: Excerpts) ■ What is 'Covert Aggression'? ■ Cases that fall under 'Covert Aggression' ■ Characteristics of 'Covert Aggression' ■ Why do people fall into 'Covert Aggression'? ■ Coping strategies for 'Covert Aggression' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/covert-aggression-2026-02/

We will be exhibiting at WIND EXPO, the Wind Power Generation Exhibition. We will address the challenges faced by our customers through wind condition observation using floating LiDAR in offshore wind power generation, sea state monitoring with moored buoys, and topographic and geological surveys using multi-beam acoustic depth sounding devices, as well as related marine and sea condition investigations. At our booth, we plan to introduce our products and services, display posters, and distribute brochures. We invite everyone to come and visit us.

Announcement of the seminar on "How to Use the Management System Aipia for the Construction Industry." *You can participate from your office or home as long as you have an internet connection. Seminar Overview: In the construction industry, it is necessary to simultaneously handle many tasks such as estimating, cost calculation, cost management, and schedule management. Managing these with Excel or paper is cumbersome and poses challenges for information sharing and error prevention. This seminar will explain how to utilize the management system Aipia for the construction industry to centrally manage tasks such as estimating, cost calculation, cost management, and scheduling. We will clearly introduce points to enhance operational efficiency and information collaboration, incorporating actual system operations. Seminar Content: What is the management system "Aipia" for the construction industry? Key points for streamlining estimating and cost calculation tasks Visualizing the site through cost management and scheduling What business improvements can be achieved with Aipia implementation? Frequently asked questions and points to consider during implementation Let's try using the system!