[SSOO Nut Adoption Case] Solving issues of slippage and disengagement during high torque tightening! Introducing the speaker cover parts of a car door.

Attention those struggling with spinning or pulling out nuts embedded in resin! Introducing outsert nuts that protect resin components and allow for high torque tightening.

"Do you have any of these concerns?" - When tightening conventional insert nuts, they can spin or come loose... - I am looking for an insert nut that can be embedded after resin molding... - I want to reduce the number of screw parts for weight reduction... - Brass insert nuts are expensive due to material and processing costs... With the 'SSOO Nut', these concerns can be resolved. 【5 Features】 ● A shape that is resistant to spinning, preventing damage to resin products ● Can be heated instantly by high-frequency vibrations, allowing for post-embedding ● Excellent pull-out strength enables reduction in the number of screw parts and weight reduction ● Uses a widely distributed material (SWCH10R), eliminating worries about material cost fluctuations ● High-speed production through forging and rolling. Allows for cost-effective mass production compared to machining *For detailed information about the SSOO Nut that can solve your concerns, please view the catalog available for download or feel free to contact us.

• others

Supports high-level torque tightening! Introducing case studies of SSOO. *Case studies are featured in the SSOO Technical Report available now.

Here is a case study of the adoption of high-torque compatible insert nuts (SSOO nuts). Adoption location: Speaker cover parts of a car door Target resin: PP-TD30 (Polypropylene Talc 30%) [Challenges before introduction] - We were looking for an insert nut that could withstand high torque tightening. [Deciding factors for introduction] - After conducting comparative tests with products from other companies, the SSOO nut was adopted because it demonstrated the highest strength. [Effects after introduction] - Since it can withstand high torque tightening, there is no occurrence of nut spinning or loosening. *For more details, please refer to the technical report digest available for download or contact us directly.

• others

By reducing the number of screw components, we have achieved a weight reduction of approximately 17%! Here are examples of the adoption of SSOO nuts. *SSOO nut technical report available.

Here are some examples of adoption that contributed to weight reduction with the high pull-out strength of SSOO nuts. <Adoption Example 1> Adoption Location: Hydrogen discharge parts used in hydrogen fuel cell vehicles (4 SSOO nuts, M6 size, used per unit) Target Resin: PP-TD30 (Polypropylene Talc 30%) [Challenge] ■ To reduce the number of screw components for weight reduction (previously 6 per unit) [Solution] ■ High pull-out strength enabled the reduction of the number of components used [Effect] ■ Reduced the number of screw components to 4 per unit ■ Achieved a weight reduction of 8g (approximately 17%) for screws <Adoption Example 2> Adoption Location: Automotive filter components (2 SSOO nuts, M6 size, used) Target Resin: New material resin using plant-derived fibers (PP) [Challenge] ■ To reduce the number of screw components for weight reduction (previously 3) ■ Insufficient strength of the new material resin causes it to spin under the specified torque with conventional products [Solution] ■ High pull-out strength enabled the reduction of the number of components used ■ High torque resistance performance meets the specified torque requirements [Effect] ■ Reduced the number of screw components to 2 ■ Achieved a weight reduction of 4g (approximately 17%) for screws

• others

Adopted for automotive intercooler parts and other resin components! Introducing examples of SSOO nut applications. *SSOO nut technical report available.

Here are some examples of cases where SSOO nuts were adopted due to their high torque resistance performance. <Adoption Case 1> Adoption Location: Automotive intercooler parts (3 SSOO nuts, M6 size used) Target Resin: PA66-GF35 (Polyamide 66, 35% glass fiber) [Challenges] ■ Need to tighten resin parts with high torque ■ Knurled type insert nuts slip when tightened too much [Solution] ■ Meets requirements with high torque resistance performance ■ No worries about slipping or coming loose [Effect] ■ Protects resin parts from damage <Adoption Case 2> Adoption Location: Turbo engine vehicle intercooler parts (2 SSOO nuts, M6 size used) Target Resin: PA-GF35 (66 nylon, 35% glass) [Challenges] ■ Requirement for tightening with high torque ■ Knurled type insert nuts experience slipping and coming loose [Solution] ■ Meets requirements with high torque resistance performance ■ No worries about slipping or coming loose [Effect] ■ Protects resin parts from damage *An intercooler is a component used to cool air compressed by a supercharger (such as a turbo or supercharger).

• others

From "strong" to "cheap"? We achieved cost reduction for EV cars with a small nut. Let me share the secret!

"Cheaper" even a little. "Lighter" even a little. The SSOO nut has contributed to cost reduction for EV vehicles with its performance. ■ High torque compatible heat-pressed insert nut (outsert nut) 'SSOO Nut' Application: Electric component cases for EV vehicles Number used: 19 pieces per unit Initially set usage number during the development stage: 23 pieces per unit. With the strong fastening power of the SSOO nut, we reduced the number from 23 to 19 while ensuring sealing performance. ● Achieved cost reduction Cost reduction was realized by reducing the number of components. - Cost reduction due to the reduction in the number of nuts - Cost reduction due to the reduction in the number of bolts - Cost reduction due to the reduction in tightening work hours ● Achieved weight reduction → Also effective for improving fuel efficiency of EV vehicles - Weight reduction of 20g per unit just from the nuts - When combined with bolts, achieved more than double the "lightness" - Space reduction for fasteners allows for miniaturization of parts → Further weight reduction is possible The SSOO nut has achieved high pull-out strength and torque resistance. For more details on the "required pull-out strength" and "required free rotation torque" of this case, please feel free to contact us.

• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.

We have published the latest issue (Issue 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. The feature of this issue is titled "Understanding Standard Revisions," where we introduce key points of management system standard requirements that new personnel should first understand in preparation for standard revisions. Additionally, we have included customer case studies, contributions from auditors, and information on certifications and standards, as well as the latest topics, so please take a look.

In recent years, while the size of residential spaces has been shrinking, there has been a growing demand from architects and designers for designs that "reduce lines as much as possible." However, designing spaces to appear clean and spacious by making door heights reach the ceiling or by minimizing the visibility of frames has posed challenges that require high skill levels from carpenters and significant construction time when attempted with conventional on-site construction methods. Against this backdrop, this year's Dretas has developed doors and storage fixtures that do not reveal frames, with the concept of "creating a noise-free space with empty space." ■ Base Frame (Fixtures) The structure hides the frame within the wall, achieving a refined design without the frame being visible from either side. It features a specially designed frame and concealed hinges that allow for 180-degree opening and closing. Frame widths (132mm, 147mm, 183mm) are set to accommodate wall thickness, eliminating the need for frame processing and supporting smooth installation. ■ Outset Frame (Storage Fixtures) The structure has the frame attached to the inside of the door, allowing the door and wall to fit flatly together. It can be configured for two or three panels, seamlessly blending even large wall storage into the space as if it were "just a wall." By using additional elements like the 3mm thick "Baseboard S-type," the installation becomes even more beautiful, enhancing the noise-free space.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.