[MINO Column] Dynamic Design Possible with Ayaki (Screen Edition)

Opening 34×40 vertical grille type N specification / HAM-KN

This is a screen that can be installed in an opening with a maximum opening dimension of 2074mm.

• screen

Opening 34×40 Vertical Lattice Type D Specification / HAM-KD

This is a type of screen that can be installed in an opening. It can be installed as a standalone screen. We offer a wide variety of sizes, with 4 height dimensions and 11 width dimensions available.

• screen

Opening 34×40 vertical grid type S specification / HAM-KS

This is a type of screen that can be installed on an opening. It can be installed individually. We offer a wide variety of sizes with 6 height sizes and 10 width sizes available.

• screen

Wall-mounted 34×40 horizontal grid type S specification / HAA-LS

This is a wall-mounted horizontal lattice screen that allows for a variety of arrangements as a decorative screen through vertical and horizontal continuous installation. It can also be used as a flat grille for sashes with a projection of up to 30mm.

• screen

Wall-mounted 34×40 vertical grid type D specification / HAA-KD

Two types with widths of 25mm and 75mm. This is a wall-mounted screen that can be used for decoration as well as for window grilles. We offer a rich variety of sizes with 4 height dimensions and 11 width dimensions.

• screen

Wall-mounted 34×40 vertical grid type S specification / HAA-KS

Two types with widths of 30mm and 80mm. This is a wall-mounted screen that can be used for decoration as well as for window grilles. The screen emphasizes light-blocking properties to soften external views and sunlight, featuring a grid of 34×40mm arranged at a 68mm pitch. We offer a wide variety of sizes with 6 height dimensions and 10 width dimensions. It allows for diverse arrangements with vertical and horizontal continuous installation.

• screen

A balcony screen made of artificial wood that has an expression so realistic it can be mistaken for real wood.

The "Kasa-gaki Tsuki Ayaki Screen Handrail MB Type" is a balcony screen that combines a hybrid ayaki screen with an aluminum handrail. Ayaki is an artificial wood made from aluminum and urethane resin. The ayaki, which replicates the grain of natural wood through careful painting to recreate a natural color variation, is an exterior material that boasts weather resistance, durability, and a texture so realistic that even craftsmen might mistake it for real wood. It has the feel of natural wood but is safe as it does not have splinters. 【Features】 ■ Artificial wood made from aluminum and urethane resin ■ Texture similar to natural wood ■ High weather resistance compared to real wood ■ Lightweight with dimensional stability comparable to concrete ■ Difficult to retain heat For more details, please refer to the catalog or feel free to contact us.

• Exterior Materials
• Flag hardware and decorative hardware
• screen

A decorative screen that enhances the exterior with excellent texture and performance.

The hybrid colored wood stripe screen offers dimensional stability comparable to concrete, along with excellent weather resistance and durability. Its superior texture beautifully enhances the exterior of residential properties. 【Product Lineup】 ○ Stripe Screen ○ Stripe Fence ○ Gable Lattice / Window Lattice For more details, please contact us or download the catalog.

• screen
• Other interior and exterior systems and units

Hybrid colored wood stripe screen wall type with aluminum and urethane resin composite building materials / HAA

Hybrid Saiwood is a completely new type of composite building material that combines the strength of aluminum with the expressive capabilities of urethane resin. ■ Wood-like screen that can be used as both a window grille and for decorative purposes ■ Standard height dimensions: H500, H1000, H1500, H2000, H2500, H3000 ■ Standard width dimensions: 10 sizes *For details, please contact us.

• Other woodworking

Hybrid Color Wood Stripe Screen Opening Type Composite Building Material of Aluminum and Urethane Resin / HAM

Hybrid Saiwood is a completely new type of composite building material that combines the strength of aluminum with the expressive power of urethane resin. ■ It is a wood-patterned screen that can be installed in openings. ■ Standard height dimensions: H500, H1000, H1500, H2000, H2500, H3000 ■ Standard width dimensions: 10 sizes *For details, please contact us.

• Gates, walls and fences

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

The receiver section of the radio is designed to receive signals properly even when influenced by other radios used in the world, and standards have been established for this purpose, requiring designs that comply with these standards. This time, I will briefly discuss the wireless standards for the receiver section! 【Contents】 ■ Minimum reception sensitivity ■ Adjacent channel selectivity ■ Receiver intermodulation ■ Spurious response ■ Harmonic emission * For more details, please refer to the PDF document or feel free to contact us.

Nihon Jitsugyo Co., Ltd. will exhibit at the "7th Kansai Logistics Exhibition KANSAI LOGIX2026," which will be held from April 8 (Wednesday) to April 10 (Friday), 2026. On that day, we will showcase products that contribute to heatstroke prevention in warehouses and factories in preparation for the upcoming summer heat. You will be able to experience the actual products at our booth, so please stop by. 【Exhibition Overview】 Exhibition Name: 7th Kansai Logistics Exhibition KANSAI LOGIX2026 Dates: April 8 (Wednesday) to April 10 (Friday), 2026 Venue: Intex Osaka Booth Number: C2-02 【Exhibited Products】 - COOL FAN SPOT mini Hieppi - COOL FAN Series - ECO FAN Series *There will also be new products making their debut at the exhibition!