We will exhibit at the 2nd High-Performance Coatings Exhibition from December 4 to 6, 2019.

The adoption of electrostatic painting technology has significantly reduced paint costs and improved productivity.

We would like to introduce a case study of our electrostatic painting machine, "Nano Gun." With the introduction of the product, the production time was reduced from 5 minutes to 4 minutes, resulting in a 20% increase in productivity and improved coating efficiency. Additionally, the elimination of the need for skilled workers has made it easy for anyone to perform painting. 【Case Study】 ■ Client: Compressor Manufacturer ■ 2 Coats - Primer (Air Spray) - Base (Air Spray → Electrostatic Air Spray) *For more details, please refer to the PDF document or feel free to contact us.

• others

A rich lineup from simple mixing to high-precision mixing! These products maintain high mixing accuracy while enhancing cleanability and maintainability.

Inject Mix Technology is a system that directly feeds a measured hardener into the mixer as the main agent for continuous quantitative supply. This enables high-precision mixing. Both the main agent and hardener pass through a static mixer in the fluid pathway, eliminating the need for pre-mixing. - Simple design considering cleaning: Improved maintenance - Achieves a highly accurate mixing ratio - Different injector sizes: Optimizes the amount of hardener input Pulse-Free Electronic Control (PFE) is a unique liquid mixing technology that ensures consistent measurement during pump switching. PFE technology guarantees consistent measurement even during pump switching. - The pump does not switch during input, maintaining high-precision measurement - Non-pulsating: No impact on the spray pattern - Mixing accuracy is ±1% *For more details, please download the catalog or contact us.

• Plastering and painting work

Low-pressure design using chip design and processing technology for high micro-particle size without static electricity. Reduction in paint usage. A low-cost entry model that achieves a 10 to 1 small pump.

Significant reduction in paint loss with minimal investment (20-30% reduction in paint usage compared to air spray), early cost recovery through shortened painting and cleaning times, and reduced health risks for staff and environmental protection due to decreased solvent use. 【Features】 ■ Easily paint hard-to-reach areas such as the corners of boxes. ■ Drastically reduced overspray, improving work efficiency with high penetration. ■ Minimizes overspray by controlling paint particle speed. Utilizing dual micro-particle technology, our unique method maximizes the control of paint particle speed. The air mix pump set allows for immediate painting once air is supplied! It is a simple painting gun and pump set that anyone can use. 【Set Contents Example】 - Air mix painting hand gun (for 120 bar) - 10:1 pump - Paint hose (7.5 m) - Air hose (7.5 m) - Suction rod - Nozzle tip (0609 size) The latest air mix technology balances high paint application efficiency and high film quality. Please compare with other manufacturers. ★ We are available for test demonstrations anytime, anywhere. (Output of 40-120 cc per minute) *For more details, please download the catalog or contact us.

• others

Achieving high coating efficiency with the unique new technology of swirling flow and the W effect of the nozzle! A spray gun that can handle complex shapes.

The "FPRO Air Spray" is a pressure-fed manual gun that allows for easy professional painting. Thanks to its unique technology, it significantly reduces the scattering speed of paint particles, greatly improving coating efficiency. Additionally, the vortex technology enhances the penetration of paint particles, making it possible to paint complex-shaped objects. 【Features】 ■ Easy to operate ■ Achieves a high coating efficiency of 78% ■ Three air caps ■ Abundant accessories *For more details, please refer to the PDF document or feel free to contact us.

• others

Lightweight design focused on handling! A spray gun with an astonishing electrostatic coating efficiency of up to 86% (±2%).

The "Nano Gun Air Mix" is an electrostatic manual spray gun designed with a minimal number of parts, allowing anyone to use it immediately after installation without complicated adjustments. This product, which has undergone improvements, boasts excellent efficiency as a non-electrostatic painting spray technology, achieving a high coating efficiency of up to 86% (±2%). With outstanding finishing capabilities, high reliability, and a design based on advanced ergonomics, it has also succeeded in other markets that require stringent standards, such as railways, aerospace, renewable energy, machine tools, and other general work. 【Features】 ■ High-quality finish ■ High productivity due to high coating efficiency ■ A wide variety of rich tip types ■ Pursuit of comfort based on ergonomics, contributing to fatigue reduction ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

Easy maintenance with a minimal component configuration! For automobiles, civil engineering machinery, and solar energy!

The "Lexon Pump" is an air-driven pump for high-viscosity materials in a single component. With continuous high discharge volume, painting time is reduced compared to cartridge-based painting. It is also easy to use, just like cartridge-based painting. It has a simple structure with few components, making maintenance easy. 【Features】 ■Improves productivity ■Suitable for high-viscosity materials up to 100 centipoise ■Modular design ■Simple structure ■Cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• others

Unique air mix technology! Achieves high coating efficiency with a tulip pattern spray shape.

The "Air Mix XCITE" is a manual spray gun suitable for spraying complex-shaped parts, featuring a precise pattern width adjustment knob. The VX24 Air Mix air cap, equipped with the "EZ Adjust" function, allows for simple operation and accurate positioning of the air cap. Additionally, the built-in filter minimizes pressure loss across various paint viscosities, achieving stable coating efficiency. 【Features】 ■ Outstanding spray quality and uniform film thickness ■ Lower paint pressure compared to other similar products, reducing spray drift ■ Excellent atomization allows for spraying a wide range of materials ■ Ergonomically designed to reduce the risk of R.S.I. (Repetitive Strain Injury) *For more details, please refer to the PDF document or feel free to contact us.

• others

Ideal for water-based paints! A compact electrostatic bell painting machine suitable for various painting applications.

The "Akyubel 709 Evo" is a robotic painting machine for water-based and solvent-based paints. The docking station can be installed while utilizing the existing paint circulation system. It prepares the next color in a transfer tank during painting, enabling quick color changes and minimal paint loss. Additionally, it employs an internal electrostatic painting method, making it suitable for water-based paints. 【Features】 ■ Color change block is outside the booth ■ Quick color change ■ Prepares the next color in a transfer tank during painting ■ Ultra-precise discharge volume control is possible at +/-1cc/min ■ Minimal paint loss (0cc for the same color, 12cc during color change) *For more details, please refer to the PDF materials or feel free to contact us.

• others

For abrasives and UV coatings! Achieving precise film thickness management.

The "Air Mix AVX/ATX" is an automatic spray gun series that achieves high coating efficiency through air mix technology. It features two independent springs that automatically release secondary atomization air before primary atomization. Additionally, it allows for easy assembly, installation, and disassembly, making it highly maintainable. The internal piping made of stainless copper accommodates a variety of materials, from solvents to water-based paints. 【Features】 ■ Fewer parts and a simple structure ■ Extremely compact and lightweight design ■ Excellent maintainability and cleanability ■ Uses a Luron seal (AVX) ■ Uses a GT seal (ATX) *For more details, please refer to the PDF materials or feel free to contact us.

• others

Contributes to reducing maintenance costs! Extremely lightweight automatic airless gun.

This product is an airless automatic spray gun that offers excellent atomization at medium or high discharge rates while minimizing paint waste. It is an extremely lightweight automatic airless gun in the industry with a base plate design, which helps reduce bearing fatigue on automatic machines that carry the painting equipment. Additionally, its compact design allows for easy access to tight spaces. It is suitable for applying harsh coatings (acid catalysts, UV coatings), water-based materials, high-viscosity substances, and abrasives. 【Features】 ■ Auto gun in the market that reduces fatigue on painting equipment ■ Compact design for easy integration ■ Quick maintenance and simple assembly (only 14 parts) ■ Reduction in maintenance costs ■ Robustness due to anodized body rigidity ■ Stainless treatment of liquid contact parts allows compatibility with various materials *For more details, please refer to the PDF document or feel free to contact us.

• others

Easy installation, easy operation, easy maintenance! A tank compatible with various coatings.

The "Paint Tank" is a pressurized tank for air spray paint. It offers the option of two agitator blades for various mixtures and materials. Additionally, the agitator air motor provides low-speed, high-torque performance with three radial piston technologies. We offer a range from a lightweight 2L aluminum tank to a high-production 50L stainless steel tank at 7 bar. 【Features】 ■ Sturdy design and easy cleaning ■ Paint capacity options from 2 liters to 50 liters ■ Compatible with various coatings ■ Easy operation ■ Agitator air motor is oil-free *For more details, please refer to the PDF document or feel free to contact us.

• others

High coating efficiency and high-quality film performance! Easy maintenance bell-shaped painting machine.

The "NanoBell 2" is a bell-shaped painting machine designed for robots, miniaturized and lightweight for small robots. It is easy to detach and disassemble, allowing for easy access to valves and fittings for maintenance. Both hollow and solid types of robot wrists can be selected. Additionally, it can save 20-50% of paint compared to conventional products, and with Hi-TE technology, it allows for more pattern painting control. 【Features】 ■ Modular design for easy maintenance ■ High-quality finishing paint ■ Achieves high coating efficiency *For more details, please refer to the PDF document or feel free to contact us.

• others

Outstanding painting quality! Significantly reduces paint loss with high voltage and large current.

The "Nano Gun" is a manual electrostatic spray gun that uses both high current and high voltage. By combining the optimal charging of the paint with efficient application to the target area, the coating efficiency can be improved by up to 20% compared to conventional gun designs. 【Features】 ■ Reduces operator fatigue and allows for comfortable operation ■ Significantly saves on paint and air ■ Accommodates a wide range of paint discharge volumes, both large and small ■ Demonstrates excellent performance in high-productivity lines ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

A variety of nozzles available! Suitable for various powder applications. Easy maintenance.

The "Auto Mach Jet" is a painting machine designed for powder coating in general industry. Typically, it is used as a fixed station within high-speed color change booths such as the PVV EasyDrive. It can also be installed in reciprocators within the PVV EasyCompact booth. 【Features】 ■ High painting quality - Easy precise setup of voltage and current - Excellent painting on complex-shaped parts ■ Easy maintenance - Simple sprayer disassembly - Profile design that allows for easy cleaning with just air blowing - Nozzle has high wear resistance *For more details, please refer to the PDF materials or feel free to contact us.

• others

Improved productivity with outstanding spray quality! Achieving stable high coating efficiency.

"Excite Light" is a manual spray gun that emphasizes lightweight, simplicity, and mobility. With excellent spray quality and a high coating efficiency (up to 86%), it is suitable for spraying complex-shaped parts. To maximize performance, we offer two specifications: 60 bar and 120 bar. 【Features】 ■ 30% weight reduction without compromising the balance of the gun ■ Compact design allows easy access to recessed areas and complex-shaped parts ■ Soft trigger reduces the risk of conditions like tendonitis ■ No pattern adjustment needed *For more details, please refer to the PDF document or feel free to contact us.

• others

We offer one-component/two-component solvent types! High-speed rotating bells that accommodate various painting processes.

This product is a high-speed rotating bell for Robotech painting machines that accommodates various products and painting processes. The "PPH 707SB" is a solvent electrostatic painting machine with internal application technology, applying the technology of high-speed rotating turbines and magnetic bell cups. The "PPH 707SB-2K" is a two-component solvent electrostatic painting machine with internal application technology, where the static mixer is positioned before the injector, contributing to the reduction of mixed paint. It also accommodates various two-component systems. 【Features of PPH 707SB】 ■ High performance ■ Flexibility ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

We offer two technologies, HTI and HPA! They cater to a variety of applications.

The "A35 HTI/HPA" is a spray technology developed by Sames Kremlin, which has achieved the best coating efficiency and film quality in the industry over many years, specifically for high-performance paint exhibitions. The ultra-low pressure "HTI" delivers optimal film quality and coating efficiency while complying with environmental protection standards. The low-pressure "HPA" can achieve film quality that has been difficult to attain until now through powerful atomization, accommodating a variety of materials, including high-viscosity substances. 【Features】 ■ High productivity: Stable and high valve opening and closing performance ■ Fully compatible with water-based paints: All stainless steel joints ■ Extensive nozzle variations ■ Significantly reduces the speed of paint particles, improving coating efficiency ■ Trusted film quality backed by proven results in the automotive industry ■ Compatible with various painting methods, including handguns and automatic machines *For more details, please refer to the PDF document or feel free to contact us.

• others

High-efficiency pump that maximizes energy efficiency, suitable for 1.5L/min! Made of stainless steel and compatible with a wide range of liquids!

The "AIRLESS 40C50" is a paint pump suitable for airless applications, designed to be economical with low air consumption. It is a high-efficiency pump that maximizes energy efficiency and is suitable for 1.5L per minute. Additionally, it features a dead zone-free design for quick cleaning and product switching. 【Features】 ■ Thick suction and high compression ratio ■ All wetted parts are made of stainless steel ■ Simple design significantly reduces the number of parts *For more details, please refer to the PDF document or feel free to contact us.

• others

Easy! You can change the pressure range by changing the number of plates. Extremely high precision even at low pressure! Suitable for hygroscopic materials and water-based materials.

The "Leg Master" is a high-pressure regulator specially designed for high-viscosity materials, suitable for hygroscopic materials and water-based materials, featuring a diaphragm design. Its modular design allows for control across a wide range of pressures. Additionally, we offer heating regulators (24V or 220V), SST regulators, and special regulators for highly abrasive materials upon request. 【Features】 ■ Extremely high precision even at low pressure ■ Excellent repeatability ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

Adopting rotary spray painting technology! Wide patterns and high discharge painting are possible.

"Inovel" is an electrostatic powder bell coating machine that employs rotary painting technology. It can detect the bell speed and maintain a constant speed, allowing for stable coating. Additionally, it reduces the number of joints and enables easy assembly, featuring a single block design with fewer parts. It allows for painting on various types of workpieces, but it is particularly effective on flat panels. 【Features】 ■ No need for high-voltage cables, integrated high-voltage unit ■ Easy-to-disassemble powder bell ■ Adjustable air shroud ■ Quickly forms the appropriate spray size ■ Excellent and consistent film formation *For more details, please refer to the PDF document or feel free to contact us.

• others

Reduced material loss during flushing & quick color switching! A pump suitable for AIRMIX finishing.

The "AIRMIX EOS 15-C25 & 30-C25" is an air mix paint pump characterized by extremely low pressure start-up, consistent supply, and pulsation-free operation, providing excellent finishing. The liquid section is designed to accommodate a wide range of viscous materials, reducing material loss during flushing and allowing for quick color changes. 【Features】 ■ Low air consumption ■ Sealed structure - No risk of injury - Protects lubricants from foreign matter intrusion - Easy-to-use rotating outlet fitting ■ No assembly required tie rod ■ Design eliminates dead zones *For more details, please refer to the PDF document or feel free to contact us.

• others

Especially when high precision pressure adjustment is required! Manual pressure adjustment type.

The "Liquid Regulator for Coating" is a manual pressure regulator suitable for situations requiring high precision pressure control. It ensures stable material supply even during continuous pressure control. It is designed to accommodate materials ranging from low to medium viscosity. 【Features】 ■ High precision pressure control ■ Easy cleaning due to surface treatment of wetted parts ■ Compatible with water-based paints ■ Equipped with a pressure gauge *For more details, please refer to the PDF document or feel free to contact us.

• others

Equipped with an external valve for easy maintenance! A pump that delivers a wide range of coating materials.

The "Flowmax 17A2・34A2" is a pump designed to transport materials that contain moisture-absorbing agents and water-based materials. Thanks to its unique design with an external valve, maintenance has become extremely easy. It does not require lubricants, has a long service life, and is highly reliable. 【Features】 ■ Extended service life ■ No lubricants required ■ High reliability ■ Easy maintenance with a design featuring an external valve *For more details, please refer to the PDF document or feel free to contact us.

• others

High coating efficiency that avoids excessive application! A lubricant spray designed for energy saving with no post-processing required.

"Shamesulub" is a lubricant spray that can be used for fin, tube machining, press tools, and more. With a design that applies electrostatic coating technology, it achieves a coating efficiency of over 98% by avoiding excessive application. Since post-processing of the lubricant (degreasing and cleaning) is unnecessary, it saves energy. It not only reduces maintenance but also contributes to improving safety in the workplace. [Features] ■ High coating efficiency ■ Accurate low discharge volume control ■ Minimization of workspace ■ Easy integration into equipment ■ Modular design *For more details, please refer to the PDF materials or feel free to contact us.

• others

Improved operability through ergonomically designed features! A powder coating handgun that accommodates various applications.

The "e-Jet2" is a manual powder coating gun that produces a stable pattern and improves coating efficiency. In addition to the ergonomically designed gun, the trolley is simple, easy to use, and compact, enhancing operability. It offers a wide variety of nozzle types, making it suitable for various powder applications. 【Features】 ■ High coating efficiency ■ Stable pattern ■ Compact and user-friendly trolley ■ Easy-to-read display and controls *For more details, please refer to the PDF document or feel free to contact us.

• others

An airless gun that demands high productivity! Improved operability with an ergonomic design.

The "SFLOW 275&450" is an airless spray gun designed for high-quality atomization and high productivity. It comes with a wide variety of flat or reversible tips to accommodate various applications. The trigger features a stable grip and is designed to reduce fatigue, allowing for a more comfortable painting experience. 【Features】 ■ 81% high transfer efficiency ■ High-quality atomization ■ Designed for high productivity ■ Suitable for various applications ■ Easy filter replacement with dedicated tools *For more details, please refer to the PDF document or feel free to contact us.

• others

A chop-check pump capable of handling ultra-high viscosity materials active in the automotive market! Equipped with a reverse seat for extended lifespan.

The S1 is a heavy-duty, high-durability pump that uses a free-flow check plate. The reversible check plate doubles its lifespan. In addition to handling ultra-high viscosity materials up to 15,000,000 CPS, it can also withstand high temperatures of up to 200°C thanks to its special throat seal. 【Features】 ■ Uses a free-flow check plate ■ Doubles lifespan with a reversible sheet ■ Compatible with ultra-high viscosity materials ■ Can withstand high temperatures of up to 200°C ■ Equipped with a special throat seal *For more details, please refer to the PDF document or feel free to contact us.

• Air compressors, blowers and pumps

This is an industry-standard measuring device provided by Sames, a long-established manufacturer of powder coating equipment, for easily and stably measuring and quantifying the flowability of powders.

The "AS100" is a powder flowability measuring device designed to measure the fluidization of powder coatings, which affects the performance of powder coating. This product indicates whether the powder coating is in a suitable state for spray painting or powder transport. It is widely used in powder coating work sites, quality control at paint and material manufacturers, and facilities such as powder coating testing labs. 【Features】 ■ Rapid and accurate measurement quantified ■ Easy and ready to use ■ Extensive track record in powder laboratories and similar settings *For more details, please refer to the PDF document or feel free to contact us.

• others

In the field of food and health food research and development, an increasing number of companies are facing the following challenges: - Difficulty in exploring new functional materials and differentiation themes, leading to a depletion of research topics. - While they are collecting information from conferences and papers, they struggle to translate this into research themes directly related to their products. - They remain limited to competing similar products and follow-up projects, failing to establish uniqueness. - Although there are seeds of ideas, they struggle to elevate them to scientific hypotheses and build the necessary foundations for internal approval. Behind this lies a "wall of execution" that cannot be overcome by traditional information gathering and research processes. In this webinar, we will introduce a new R&D approach to break through these challenges. It is a next-generation research and development scheme that combines AI-driven hypothesis generation, which has achieved results in drug discovery, with scientific hypothesis verification by a food human trial CRO. This will allow for the transformation of vague ideas into scientifically verifiable projects, simultaneously achieving the construction of persuasive foundations for upper management and differentiation development.

Fujikohsuhou Industrial Co., Ltd. will hold an online seminar titled "Tips for Setting Laser Hardening Conditions" on July 20, 2025 (Wednesday). In laser hardening, factors such as output and speed are related to the quality of hardening. We will explain how output and speed are connected to quality factors. This seminar is aimed at those who are looking to start utilizing laser hardening. 【Recommended for】 ■ Those who want to learn about methods for setting laser hardening conditions ■ Those who want to obtain technical information about laser hardening

Take the 'first step' in DX talent development in Fukuoka. We will hold a free seminar where you can learn reskilling strategies that can be applied in the field through case studies and experiences! 'I've become responsible for DX, but I don't know where to start.' This is a participatory seminar aimed at representatives from small and medium-sized enterprises in Fukuoka City, Fukuoka Prefecture, where you can learn the 'first steps' in DX talent development and implementation support. While introducing case studies of representative DX tools such as Power Automate and Power BI, you will experience hands-on sessions with Copilot, allowing you to grasp practical small-start methods that can be implemented on-site. The content also includes specific success stories from the Fukuoka region, along with tips for promoting understanding and advancement within your organization.

We will be exhibiting at INCHEM TOKYO 2025, which will be held at Tokyo Big Sight from September 17 (Wednesday) to September 19 (Friday). This time, we will host many events, including special project stages and mini-seminars. At our booth, we will introduce our solutions and technologies based on the theme of "Sustainable Plant Engineering" from three different concepts. Please be sure to stop by our booth, East Hall 6, K-17.

The Siemens EDA Tech Forum is a technical event aimed at sharing the latest technological trends, case studies, and solutions to challenges with everyone involved in the design and development of silicon systems and electronic systems, while addressing evolving technologies, the densification and complexity of designs, and various design challenges, all while meeting requirements for quality, safety, and reliability. The goal is to deepen insights and networks towards achieving sustainable business. The forum covers a wide range of topics, from advanced design technologies and methods in fields such as 3D ICs, chiplets, chips for AI and ML (machine learning), and IC packaging, to the design, analysis, and collaborative development of electronic systems, including printed circuit boards, across multiple domains, as well as building ecosystems both internally and externally using digital threads. Through case presentations and explanations of design methods by industry leaders, it supports solutions to challenges faced in daily design work from all directions. This is a free technical event that requires pre-registration. We hope you will participate!