Reduce bandwidth consumption and transmit video content with visually lossless quality! 【HDMI over IP H.264 Encoder/Decoder】

Reduce bandwidth consumption and transmit video content with visually lossless quality!

This product is a video extender capable of audio encoding control from PCM and AAC. It supports up to 10 simultaneous RTSP clients depending on the data rate. TS data is delivered via UDP or RTP. (Supports both unicast and multicast) 【Features】 ■ Supports H.264/MPEG-4 AVC video compression ■ Audio encoding control from PCM and AAC ■ Delivers TS data via UDP or RTP ■ Supports resolutions up to 3840×2160 @30Hz ■ Compatible with static IP, DHCP, and automatic IP *For more details, please refer to the PDF document or feel free to contact us.

• others

Transmit AV signals over IP networks! Video extender with two power modes.

This product is a video extender that can transmit AV signals over an IP network. It can acquire and distribute video not only from encoders within the same network but also from encoders across the internet. It supports H.264/MPEG-4 AVC video compression. 【Features】 ■ Supports H.264/MPEG-4 AVC video compression ■ Receives TS data via unicast or multicast ■ Two power modes: DC 12V and PoE ■ Supports a maximum resolution of 3840×2160@30Hz ■ Compatible with static IP, DHCP, and automatic IP *For more details, please refer to the PDF document or feel free to contact us.

• others

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Our first zero-phase current transformer (ZCT) CTL-36-S80-12Z-CL - Waterproof design allows for outdoor installation - Split-type design enables easy installation on existing setups - Customizable according to your requirements For more details, please contact us.

Compact yet multifunctional. A constant voltage power supply with a multifunctional specification that expands lighting control capabilities by supporting the connection of two lighting devices. We have launched the compact power supply "LPAVR2-2472D." It is a DC input type constant voltage control power supply condensed into a palm-sized resin case, offering ease of use and flexible dimming functions. The LPAVR2-2472D is a power supply unit that balances space-saving design with flexible dimming capabilities. It can be utilized in a wide range of scenarios, such as adjusting the brightness of LED lighting and voltage control applications within devices. Product Features: ● High-performance constant voltage power supply that supports long and large lighting despite its compact size ● Made with a resin case, it features analog settings for two channels and multifunctional specifications ● Flexible dimming function compatible with internal and external dimming (0-5V) ● Output voltage can be switched in three stages, ensuring safety ● Excellent installation with screwless terminal blocks and DIN rail compatibility For detailed specifications or inquiries about installation, please feel free to contact us.