◆◆Notice◆◆◆Regarding Product Deliveries Related to the G20 Summit◆◆◆

Extremely high holding capacity for the rebar position in the simple spray application method framework!

This is a glass stand type that uses four rebar rods, designed for the purpose of creating green slopes and disaster prevention, under the Easy Shelf method of simple spraying frame construction. NETIS Registration Number: KK-160021-VE **Features of the Easy Shelf Method Power Stand:** 1. The punched steel plate structure is designed to be strong against deformation from external forces, exhibiting an extremely high holding capacity relative to the specified rebar positions in the design. 2. It can be stacked for easy transport, enhancing work efficiency. **Features of the Easy Shelf Method Glass Stand:** 1. The glass stand, with its punched steel plate structure, is strong against deformation from external forces and demonstrates an extremely high holding capacity relative to the specified rebar positions in the design. 2. The outer dimensions of the glass stand are designed to ensure a cover of 40 mm at all points relative to the finished shape, helping to reduce the occurrence of cracks after spraying. 3. The glass stand features numerous openings and cuts that eliminate mortar edge cutting and facilitate easy binding, resulting in excellent workability. The glass stand can be stacked, making it easy to transport.

• Slope protection material
• Earth retaining wall/foundation reinforcement
• Civil Engineering Method

It's called "Sanbo" because it's three bars! It's a simple spraying method framework using three rebar!

This is a type that uses three rebar rods for the Easy Shelf method of simple spray application frame construction. The Easy Shelf method is conducted under the association system, but if you are considering joining the association in the future, it is also possible to sell it in the form of a trial construction. NETIS Registration Number: KK-160021-VE 【Simple Spray Adhesive Frame - Easy Shelf Method Sanbo Type】 1. The punched steel plate structure is designed to be strong against deformation from external forces and exhibits an extremely high holding capacity in relation to the specified rebar positions. 2. It can be stacked for transportation, improving work efficiency. For more details, please contact us or download the catalog.

• Special Construction Method

A simple spraying method framework that balances the creation of green slopes and disaster prevention! It has good workability and shortens the construction period compared to conventional spraying framework methods!

The "Easy Shelf Method" is a simple spraying framework designed for the creation of green slopes and disaster prevention. The framework is flexible and easy to construct, allowing for the preservation and restoration of green spaces. NETIS Number: KK-160021-VE Registered in Wakayama Prefecture Glass Stand Type A: R03-1235 Glass Stand Type B: R03-1236 Glass Stand Samba Type: R03-1237 【Features】 ■ Good workability and shortened construction period ■ Excellent flexibility ■ Increased resistance to surface erosion ■ Reverse construction is also possible ■ Economically advantageous ■ More reliable retention of rebar positions ■ Design of various frame spans is possible *Although it is an association system, trial construction is possible even for non-members, so please contact our sales staff for details. *For more information, please request materials or view the PDF data from the download section.

• Slope protection material
• Civil Engineering Method
• Special Construction Method

Due to its steel plate punching structure, it is strong against deformation caused by external forces and exhibits extremely high holding capacity in relation to the rebar position! *It will be exhibited at the Wakayama Prefecture Kensanpin.

The "Easy Shelf Method Sanbo Type" uses three rebar. It's called "Sanbo" because it has three bars. The Easy Shelf Method Sanbo is designed with a punched steel plate structure, making it strong against deformation from external forces and exhibiting an extremely high holding capacity in relation to the specified rebar positions. It can be stacked for easy transport, which also enhances work efficiency! NETIS Registration Number: KK-160021-VE ＊＊＊＊ Easy Shelf Method Sanbo Type Wakayama Prefecture Ken Sanpin Registered Product Registration Number: R03-1237 *For more details, please refer to the PDF or contact us.

• Gunpowder
• Earth retaining wall/foundation reinforcement
• Concrete construction

Less likely to clump! Short fibers for mortar spraying!

Easy Fiber for crack suppression reinforcement is a short fiber used for crack suppression and reinforcement in sprayed mortar. Its framework offers flexibility and workability, allowing for the preservation and restoration of green spaces through applications such as reinforced earth construction methods. For details on effectiveness and safety concerns, please contact us or download the catalog for more information.

• Premixed mortar
• Other civil engineering works
• Plastering and painting work

For suppressing shrinkage cracks in sprayed mortar! Safe material made of polypropylene! Crack-suppressing short fibers that can be mixed with a mixer.

Crack suppression polypropylene short fibers, Toughlight, are processed in bundles, making them less likely to scatter and less likely to pierce the skin. Furthermore, since polypropylene is the material used, no toxic gases are generated during combustion, making it a highly safe crack suppression short fiber. 【Incorporation Effects】 ● Reduces scattering and collapse during spraying ● Reduces shrinkage cracks caused by temperature changes and drying during the curing period 【Excellent Workability】 ● Easily mixed with a conventional mixer ● Generates few fiber balls and has high degradability ● The flow value remains unchanged with the incorporation of Toughlight, maintaining fluidity ● During spraying operations, fibers do not pierce like needles due to rebound There are many other features as well! For more details, please contact us or download the catalog to view. 【Proposal: Weed Control through Reinforced Fiber Mixed Spraying】 K.F. proposes "Weed control construction using mortar reinforced fiber mixed spraying." Please check the basic information section below.

• Fiber wall
• Earth retaining wall/foundation reinforcement
• Pile and foundation work

Easy and low-cost crack prevention. It effectively suppresses breathing and demonstrates excellent results.

For the suppression of concrete cracking, please use Toughlight CP, a polypropylene fiber for concrete crack prevention. Features: 1. Easy mixing. Just add it directly from the bag and spin for three minutes at high speed. 2. Low cost. Can be installed for about 80 to 160 yen per square meter! *Based on a concrete thickness of 10 cm. 3. A NETIS registered product for your peace of mind. For more details, please contact us or download our catalog to take a look.

• Formwork material
• Bentonite

Non-absorbent fiber visibility rope for slope construction.

Due to the lack of water-absorbing fibers, there is no hardening of the rope from moisture absorption. There is no difference in tensile strength due to wet and dry conditions. Since it is a yellow rope, it has good visibility even in heavy snowfall areas, and because it uses non-water-absorbing fibers, the rope is less likely to freeze.

• Earth retaining wall/foundation reinforcement
• Earthworks
• Pile and foundation work

The seismic sensor device "HK-2" detects strong tremors equivalent to a seismic intensity of 5 or higher, transmits a signal to the control room, and emergency stops the facility equipment. 【Installation Location】 Automotive parts factory 【Challenges】 Due to the maintenance and replacement of the factory equipment control devices, we considered updating the existing seismic sensors as well, but since production had already ended, we were looking for alternatives. 【Effects After Installation】 The HK-2 has the function to emergency stop equipment during an earthquake, and since its functionality is the same as the existing device, it was introduced as a replacement. Its compact size also allowed it to fit within the existing control panel being used. ★See more examples of the seismic sensor device "HK-2" https://www.hotron.co.jp/recommend/HK-2_lp.html#anchor_a04 ◎For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

On December 23rd (Tuesday), the Japan Meteorological Agency announced the three-month forecast for January to March. During this period, there will be times when the extension of the Siberian high pressure is weak to the northeast and strong to the southeast, which may lead to the influence of cold air from the west. As a result, temperatures nationwide are expected to be nearly average from January to February. For more details, please visit our company website.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.