[Thank You for the Great Response] An indoor drying rod that looks great in an open space - the stylish 'Iron Hanger Pipe'. It caters to the needs of temporary clothing storage and indoor drying with an emphasis on interior design, suitable for rental properties. Available in matte black and white, with 13 different shapes and customizable lengths.

An iron hanger pipe that looks great even when displayed in an open space. Available in matte black and white, with 13 different shapes and customizable lengths.

★ A focus on the texture and specifications of "display" When it comes to clothes drying rods and hanger pipes, stainless steel is the standard. While there are no functional issues, using it in an open space can make the shiny stainless steel too assertive. Even if you think of it as an accent for the space, the cheap feel from the "clothes drying rod" image can be concerning. With the intention of using it openly in a space, we have prepared two types in matte textures: white and black. They are coated with a baked paint that is resistant to chipping. The white is recommended for interiors based on white, blending into the space with a light presence. The rugged black serves as an accent in the space, complementing walls and ceilings with exposed concrete structures or dark wood. The pipe's diameter of 22mm is also a carefully considered point. If the pipe is too thick, it can look clumsy, so we used thick iron to balance appearance and strength. The connecting parts of the pipe, known as "flanges" and "elbows," are made of cast iron for sufficient strength. The heavy, robust appearance is also appealing. *Continues in the section "Basic Information" below↓

• Spatial Design
• Living and dining furniture
• Storage furniture

【Good Design Award from the Minister of Small and Medium Enterprises】 A drying rack storage that is chosen by those who are particular about interior design, extending the wire only when necessary.

#1 Surprisingly Unnoticeable "Sagging" The pid4M wire is made of durable stainless steel, so it doesn't sag much even when a lot is hung on it. Additionally, the uneven surface of the wire acts as a non-slip feature, making it difficult for hangers to slide. The pid4M has a load capacity of 10kg, a maximum length of 4m, and can hold a substantial amount of laundry. #2 A Clothes Drying Rack Chosen by Those Who Care About Interior Design The pid4M is chosen by people who are particular about their interior design. The reason is that its appearance does not interfere with the design of the home, whether laundry is being hung or not. Because it is an item used irregularly for indoor drying, attention is paid even when it is not in use. That is the pid4M! #3 Not Just for the Living Room: "Freedom to Dry Indoors" The installation location for the pid4M is not limited to spacious areas like the living room. Whether installed in a loft or hallway, it will seamlessly blend into your living space, becoming a favorite spot with a sense of unity!

• Spatial Design
• Wire
• Storage furniture

"Stretch and dry it where you want to use it, when you want to use it." It can be used not only in straight lines but also in diagonal hanging, making effective use of narrow spaces like washrooms and changing areas.

★Easy one-touch operation You can easily attach and detach the main unit and secure the rope, so you can quickly install it when you want to use it and easily remove it when you don't. Additionally, by installing multiple rails not only in the bathroom but also in other rooms like the living room and bedroom, you can utilize it in various scenes across different rooms.

• Spatial Design
• Wire

This is a handmade steel shelf crafted by a metalworker. It is a rugged rack that showcases the texture of the iron material.

★I love iron Black steel angle materials, flat bars, and expanded metal. These are the types of iron that make up this rack. Even though we generally refer to it as "iron," depending on its use, it can be thinly stretched, bent, or drilled, and in the field, it circulates in a semi-finished state. This rack is made by combining these semi-finished iron materials without excessive processing, keeping them as close to their original state as possible. Therefore, it has a rugged appearance, as if it just came straight out of an iron factory. *Continues with "Basic Information" below↓

• Casting and metal decoration
• Storage furniture
• Fittings and fittings work

Featuring highly designed storage solutions such as embedded storage, customizable wall storage, popular entrance storage, display storage, system storage, and storage components.

Storage that allows you to express your own style in that space, depending on how you show and hide it. We offer built-in storage that blends into the space and maximizes usage, as well as versatile wall storage that can be combined freely, responding to each customer's storage style. ■ SEDIA SYSTEM × Sanwa Company Watanabe Pipe's - Logistics through a base × delivery network - Face-to-face sales leveraging industry experience - Financial functions In collaboration with Sanwa Company's storage and furniture storage. ■ Catalog Introduction Please pay attention to the "Best Selection" system entrance storage, Geta Box Plus, and other collections that can be freely combined and come in a variety of color variations. *For more details, please download the PDF catalog or feel free to contact us.

• Entryway furniture
• Living and dining furniture
• Storage furniture

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

What do the members of the back office department consider when choosing or replacing a system? If the same product is handled by both a "manufacturer" and a "distributor," how do you feel about it? "Distributor"? Isn't it cheaper to buy directly from the manufacturer? It's obvious that receiving direct service is better, right? ...Is that really the case? In the materials we are releasing this time, we will explain the benefits of "introducing a distributor." Here’s a preview of the materials: 【If you’re going to choose, you should leverage the power of a distributor that handles the ○○ system!】 【Make the distributor your ○○○○○○○ and use them to the fullest!】 Along with these points, we are offering a "Distributor Evaluation Checklist" that will be your strong ally, free of charge! Please make good use of it.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.