Handling CAE Solutions

"Particle-PLUS" is a plasma and rarefied fluid analysis software that specializes in magnetron sputtering devices using the particle method.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - It can perform advanced physical model analyses such as CCP and external circuit models. - It specializes in plasma simulations in low-pressure gases, where fluid modeling is challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis of complex models. - As a strength of our in-house developed software, it can perform standard CCP and magnetron sputtering calculations, as well as customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma and rarefied fluid analysis software that uses the particle method.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it can perform standard CCP and magnetron sputtering calculations, as well as customization to fit the customer's equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma analysis software suitable for simulations such as plasma reaction furnaces and chemical vapor deposition (CVD).

Particle-PLUS is plasma and rarefied fluid analysis software that uses the particle method. It is effective for research, development, and manufacturing of devices and materials using plasma. It is also capable of analyzing advanced physical models such as dual-frequency CCP and external circuit models. With comprehensive support, even those new to simulation or busy with experiments can reliably achieve results. The software employs a particle model to analyze plasma, utilizing the PIC/MC (Particle In Cell / Monte Carlo) method to track the motion of particles representing electrons and ions. Depending on the target plasma density, it efficiently switches between implicit methods for relatively high densities and explicit methods for low densities, allowing for effective solutions even for complex models. It excels in plasma simulations of low-pressure gases, where fluid modeling is particularly challenging. In addition to standard functions for CCP, ICP, and magnetron sputtering calculations, customization to fit customer devices is also available.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices and equipment using plasma, compatible with CCP. - Excels in simulating low-pressure gases where fluid models are difficult to compute. - Advanced physical model analysis including CCP and external circuit models. - Supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it not only includes standard functions for CCP and magnetron sputtering calculations but also allows customization to fit customer equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma and rarefied fluid analysis software that is also skilled in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices using plasma, compatible with CCP. - Excels in plasma simulation for low-pressure gases, where fluid modeling is challenging. - Advanced physical model analysis, including CCP and external circuit models. - Supports 2D and 3D, efficiently analyzing even complex models. - As a strength of our in-house developed software, it offers standard functions for CCP and magnetron sputtering calculations, as well as customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive Coupled Plasma (CCP) - Dielectric Barrier Discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

Dilute fluid analysis software 'DSMC-Neutrals' that also supports 'shower head type CVD' analysis.

Simulation analysis of gas flow in a shower head type CVD device Initially supports various simulations 【Features】 ■ Adopts unstructured mesh, allowing for calculations that reflect the complex shapes of actual devices ■ High parallel efficiency enables quick computation results even for large-scale geometries ■ Utilizes a particle method, ensuring convergence to a solution even with poor-quality computational grids, unlike fluid models ■ Comprehensive technical support allows beginners and those busy with experiments to reliably achieve results ◆ Supports various cases ◆ - Simulation of dilute gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as chemical vapor deposition (CVD), organic light-emitting diode (OLED), and molecular beam epitaxy (MBE) ◆ Outputs various computational results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.*

• Scientific Calculation and Simulation Software

Analysis of gas flow under low-pressure conditions can be performed. Analysis software that also supports rarefied gases (rarefied fluids).

**Features** - Adopts unstructured mesh, allowing for calculations that directly reflect the complex shapes of actual devices. - High parallel efficiency enables quick computation results even for large-scale shapes. - Utilizes a particle method, ensuring convergence solutions even with poor-quality computational grids, unlike fluid models. - Comprehensive technical support ensures that even those new to simulations or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow within a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Simulation of thin film generation in semiconductor manufacturing processes such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE). **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Analysis and prediction system
• Scientific Calculation and Simulation Software

"Dust behavior affecting contamination" analysis supported by the rarefied fluid analysis software 'DSMC-Neutrals'.

Simulation Analysis of Dust Behavior Affecting Contamination Initially compatible with various simulations 【Features】 ■ By adopting unstructured meshes, it is possible to compute the exact shape of complex actual devices. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can always be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic EL (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computation results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other Hydrogen/Fuel Cells

Analysis of gas flow under low-pressure conditions. Analysis software compatible with rarefied gases (rarefied fluids).

**Features** - By adopting an unstructured mesh, it is possible to compute the exact shape of complex real devices. - High parallel efficiency allows for quick computation results even for large-scale shapes. - Since it employs a particle method, unlike fluid models, it can achieve a converged solution even with poor-quality computational grids. - With comprehensive technical support, even those new to simulation or busy with experiments can reliably obtain results. **Supports Various Cases** - Simulation of rarefied gas flow in a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Chemical vapor deposition (CVD), organic light-emitting diode (OLED), molecular beam epitaxy (MBE). - Film deposition simulations that include chemical reactions like CVD. **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculations of dissociation, recombination, and molecular (atomic) exchange reactions. - Multiple reaction equations can be set up on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Analysis and prediction system
• Scientific Calculation and Simulation Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses, such as examining optimal shapes, identifying the causes of problems, and verifying performance—tasks that were traditionally outsourced—this leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated on SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape evaluation, root cause investigation, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs.

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape exploration, problem identification, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems such as micro-scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.

We have published the latest issue (Issue 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. The feature of this issue is titled "Understanding Standard Revisions," where we introduce key points of management system standard requirements that new personnel should first understand in preparation for standard revisions. Additionally, we have included customer case studies, contributions from auditors, and information on certifications and standards, as well as the latest topics, so please take a look.

In recent years, while the size of residential spaces has been shrinking, there has been a growing demand from architects and designers for designs that "reduce lines as much as possible." However, designing spaces to appear clean and spacious by making door heights reach the ceiling or by minimizing the visibility of frames has posed challenges that require high skill levels from carpenters and significant construction time when attempted with conventional on-site construction methods. Against this backdrop, this year's Dretas has developed doors and storage fixtures that do not reveal frames, with the concept of "creating a noise-free space with empty space." ■ Base Frame (Fixtures) The structure hides the frame within the wall, achieving a refined design without the frame being visible from either side. It features a specially designed frame and concealed hinges that allow for 180-degree opening and closing. Frame widths (132mm, 147mm, 183mm) are set to accommodate wall thickness, eliminating the need for frame processing and supporting smooth installation. ■ Outset Frame (Storage Fixtures) The structure has the frame attached to the inside of the door, allowing the door and wall to fit flatly together. It can be configured for two or three panels, seamlessly blending even large wall storage into the space as if it were "just a wall." By using additional elements like the 3mm thick "Baseboard S-type," the installation becomes even more beautiful, enhancing the noise-free space.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.