Countermeasures against RFID mutual interference: The non-combustible (mandatory under interior restrictions) aluminum SS sheet that shields radio waves solves issues of radio wave interference and misreading of tags in apparel, specialty stores, and supply chains, making it possible to conduct inventory segregation in the same area, which has been said to be difficult with RFID until now.

In an era of frequent earthquakes, glass fiber reinforcement materials demonstrate excellent strength, outstanding durability and workability, making new construction, renovations, and maintenance work easy.

【SS Sheet: Fireproof Material Certification Number (Non-combustible: NM-1776) F☆☆☆☆ Certification】 ● Reduction of radio wave interference in the 5G and WiFi6 era ● Aluminum sheet reinforced with glass cloth ● Both sides are aluminum, providing unprecedented strength, making it less likely to develop cracks from holes or bends during installation, and it excels in workability. In case of an emergency, the joints and holes can be reinforced with conductive aluminum tape of the same material, enhancing shielding performance. 【SS Tape】 ● Reinforcement of gaps between shielding materials, repair of holes, reinforcement of metal connections, and around openings (for shielding joints, shielding construction repairs, and joining metal to metal)

• board
• Heat shielding sheet
• Reinforcement and repair materials

We prevented RFID radio wave interference, misreads, and reading errors with a non-combustible SS sheet barrier, improving the success rate of bulk reading of large quantities of products while preventing the reading of non-target electronic tags.

● Before the measures were implemented, the electronic tags (RFID) on the apparel store side were being read by the reader on the back-end side, causing disruptions to operations. However, by spatially separating them with a non-combustible aluminum shield sheet partition (constructed on the back wall to prevent multipath interference, with ceiling installations in some cases depending on the environment), we reduced the impact of mutual interference and resolved the issue, and we are currently expanding renovations to all stores. ● By utilizing RFID and electronic shelf labels together, we can automate necessary parts and allocate limited personnel to areas where human involvement enhances corporate value and the significance of the store, achieving true labor reduction. Recently, due to the strain on radio waves leading to frequency shifts and reconfigurations, as well as an increase in RFID users and other wireless devices, cases of acquired radio interference and other issues have been observed. However, what is expected, considering the characteristics of RFID, is not just labor reduction. ● The non-combustible certified aluminum electromagnetic wave shielding sheet used has obtained F☆☆☆☆ certification and fireproof certification (non-combustible: NM-1776). Its high shielding performance and durability make it user-friendly, and since it can be relatively easily installed in general interior construction, it is expanding its range of applications in various uses where expertise was previously required.

• Special Construction Method

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

In the October 31 issue of the newsletter "Carbon" No. 13 from Mitani Sangyo Co., Ltd., our "LP Gas & Gasoline Generator ELSONA" and our support activities for the disaster-stricken areas during the Noto Peninsula earthquake have been featured. Even now, as recovery continues in Noto, new challenges and collaborations are emerging, and hints for regional revitalization that have become visible through these efforts are being introduced. Please take a look. ___________________________ Digital book available here (Featured article on pages 32-33) https://carbon-innovation.com/ ___________________________