Lightweight, compact LED tunnel lighting from Seiwa Electric.

LED tunnel lighting (with initial luminous flux correction function) conforms to the LED road and tunnel lighting introduction guidelines (draft) and improves the fixture luminous flux.

The tunnel lighting from Hoshi and Denki adopts long-lasting, high-efficiency white LEDs as the light source, and by incorporating an initial luminous flux correction function, it achieves low maintenance and energy-saving capabilities. ○ It can reduce power consumption and CO2 emissions. ○ Maintenance work that involves traffic regulation can be minimized. Maintenance tasks that require traffic regulation, such as lamp replacement, can be reduced. 1. Long lifespan: 20 years; only one replacement of LED and control device; lifespan of 90,000 hours. The lifespan of the LED module is 90,000 hours, allowing for over 10 years of maintenance-free operation with 24-hour daily lighting. By coordinating the lifespan of the LED module and control device, only one replacement of both will be needed during the 20 years of operation. 2. Lineup: Two types of light distribution and four types of light source capacities. With two types of light distribution and four types of light source capacities, it accommodates a wide range of design speed conditions (40-80 km/h). ■ Ceiling-mounted wide span (CL) …… Two types: LED 50W, 80W ■ Side wall-mounted wide span (BL) …… Four types: LED 40W, 50W, 80W, 100W 3. Supports special dimming: Two-stage dimming capability.

• LED light source/module

LED tunnel lighting (with initial luminous flux correction function) has been improved to comply with the LED road and tunnel lighting introduction guidelines (draft) and enhance the fixture luminous flux.

LED Tunnel Lighting By adopting long-life, high-efficiency white LEDs as the light source and incorporating an initial luminous flux correction function, we achieve low maintenance and energy-saving features. 1. Long Life: 20 years, with only one replacement of the LED and control device; lifespan of 90,000 hours. The lifespan of the LED module is 90,000 hours, allowing for maintenance-free operation for over 10 years with 24-hour daily use. The control device for the LED module is also designed to have a coordinated lifespan, resulting in only one replacement of the LED module and control device during 20 years of operation. 2. Lineup: Two types of light distribution and four types of light source capacities. With two types of light distribution and four types of light source capacities, it can accommodate a wide range of design speed conditions (40–80 km/h). ■ Ceiling-mounted wide span (CL) … Two types: LED 50W, 80W ■ Side wall-mounted wide span (BL) … Four types: LED 40W, 50W, 80W, 100W 3. Supports special dimming: A feature made possible by LEDs, with two-step dimming capability. 4. Initial luminous flux correction function (our proprietary feature). 5. Standard equipped with luminous flux reduction alarm function (our proprietary feature). 6. Modularization of component parts.

• LED light source/module

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

Management College Co., Ltd. will be exhibiting at the "24th [Tokyo] General Affairs, Human Resources, and Accounting Week [Autumn]" held at Makuhari Messe from September 10 (Wednesday) to 12 (Friday) within the "HR EXPO." This time, we will introduce the newly released "Quick Learning Program" from last October at our booth. This is a new training program aimed at new employees from Generation Z, designed to efficiently develop the six essential skills required for business professionals, allowing participants to engage in training actively and enjoyably. We will also present our popular "Management Game MG Training Series," and we sincerely look forward to your visit. [Free Seminar Announcement] Theme: Case Studies of Management Simulation Training in Listed Companies Our Takada will introduce trends in experiential learning and corporate case studies. There will also be special benefits for seminar participants (such as information on special free trial seminars), so we hope you will register for this as well. *The seminar will be held on September 10 (Wednesday) at 15:30 in Seminar Room G within the venue.

Developed for the purpose of improving the safety of sales areas, the SP Bracket-specific anti-fall part (NX-BSP). Simply inserting the bracket activates the internal spring, securing it firmly. It prevents unexpected dislodging, thereby averting product drops and accidents. Moreover, the release is easy and does not compromise workability, making it efficient for layout changes and sales area construction. It achieves a balance between "safety measures" and "work efficiency." An essential part for enhancing the safety of sales areas. Please make use of it for risk management at construction sites.