A fire sensor integrated with a wire creates a wide-ranging fire alert area / New product with fire detection wire (with fire push button).

A fire sensor integrated with a wire creates a wide-ranging fire alert area / New product: fire detection line (with fire push button).

■Features of Fire Detection Wire (with Fire Push Button) 1. By simply pulling out and wiring the fire detection wire (with fire push button), the fire detection circuit is completed, creating a fire alert area. The fire detection wire (with fire push button) can be rolled up and moved to the necessary location for wiring. 2. Anyone can wire the fire detection wire (with fire push button) by pulling it out. 3. The fire detection wire (with fire push button) can be wired in places at risk of fire or arson, such as buildings, industrial machinery, and the grounds or buildings of temples/shrines, allowing for fire alert areas ranging from small to large. 4. The fire detection wire (with fire push button) can be wired in outdoor and indoor large facilities, such as forests near residences, parks, public facilities, and event venues, enabling response to extensive fire alert areas. 【Notes】: Features of Fire Detection Wire 1. It is an eco-friendly technology product with zero standby power due to its switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. The operation is a physical action that does not require power, ensuring no malfunctions and allowing for swift and precise use over many years. 4. Direct temperature sensing (temperature detection) can be done without measurement instruments. 5. The fire detection wire can be used for indoor/outdoor wiring. 6. It is a non-reset type that allows for confirmation after activation.

• Other commercial buildings and service facilities
• Facility Design

A fire memory sensor integrated with electric wires / New fire detection wire launched.

■Features of Fire Detection Wires 1. By extending the wiring, the fire detection circuit is completed, creating a wide area for fire alert. 2. Wiring in buildings under construction, ships being built, aircraft, and vehicles completes the fire detection circuit. 3. Wiring around the exterior of residential garages, storage sheds, and warehouses completes the fire detection circuit. 4. Wiring in the precincts of temples/shrines and in livestock buildings completes the fire detection circuit. 5. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring devices. 6. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 7. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 8. Utilizing the softening of the wire and the recovery of shape memory alloys, the two wires short-circuit to sense the temperature and send a signal. 9. It is an eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and once activated, it retains its state permanently, allowing for long-term use. 11. This product meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Imported houses and log houses
• Facility Design

New product of fire memory sensor integrated with a combination of electric wires and shape memory alloy.

This product is a fire memory sensor with a set temperature of 80°C. It integrates a shape memory alloy attached in a coil shape to a wire. When the surrounding temperature reaches 80°C, the wire softens, and the shape memory alloy constricts the wire (restoring it), creating a short circuit between the two wires to generate a temperature sensing signal (80°C). It is designed to be installed in equipment or locations at risk of fire, alerting the surroundings through alarms and preventing fires in advance, while also providing daily monitoring of fires with an eco-friendly technology product that has zero standby power for its switching function. It is a non-resettable type that allows for confirmation of a fire after activation. This product meets the performance standards of a fixed temperature type detector (Type 1) as specified by fire safety regulations (120 seconds). Set temperature: 80°C. ■ Contact information regarding this matter: 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Facility Design

Eco technology utilizing the restoration of shape memory alloys and the softening of electric wires / New product of temperature memory sensors

■Features of Temperature Memory Sensor 1. It operates through a physical action that does not require power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with electric wires. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing the temperature and generating a signal. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory and is rust-free, maintaining its state permanently once activated. 10. This product meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 11. It is a non-resettable type that allows confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Facility Design

New product: Temperature memory sensor (with terminals) that detects abnormal temperatures before fire in various industrial equipment.

■Features of Temperature Memory Sensor (with terminals) 1. Capable of detecting abnormal temperatures inside various distribution boards, control panels, and operation panels (set temperature 80°C). 2. Capable of detecting abnormal temperatures inside industrial equipment and electrical devices. 3. Operates through physical action without the need for power supply or measuring instruments, directly sensing temperature and generating signals. 4. The operation allows for direct temperature detection through physical action, with a simple circuit configuration that can be produced at a low cost. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 6. Capable of routinely monitoring various abnormal temperatures, ensuring reliable and safe maintenance management. 7. A product that integrates shape memory alloy with a terminal attached to the wire (set temperature 80°C). 8. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 10. A product that meets the performance standards of fixed temperature type detectors (Type 1, 120 seconds) as specified by fire safety regulations. 11. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location must be removed and reconnected).

• Power distribution and control panels
• Facility Design

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

A new product for temperature sensing (70℃) that can directly sense temperature and signal through a physical operation without the need for power.

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate a signal through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the collective monitoring of various abnormal temperatures on a daily basis, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and highly accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reset. The activated location can be deleted and reconnected.)

• Facility Design

―― Is attendance management becoming a "burden" without you realizing it? A seminar to quickly learn about common issues and their solutions ―― We will be holding our attendance management web seminar in October, which takes place several times a year! The content is new, so whether you have participated in our webinars before or not, please feel free to join us. Date and Time: October 15 (Wednesday) 13:00- October 22 (Wednesday) 11:00- *Both days will cover the same content *Please check the link below for registration. In this seminar, we will recreate common situations in the workplace in a short drama format for easy understanding, and introduce specific solutions to each issue. This content is especially recommended for those who think, "I'm not struggling now, but I want to know information for the future." Common workplace "situations" can be a trigger for improvement. We will clearly present the challenges and countermeasures of attendance management. Recommended for: ❏ Those who take a long time to compile monthly attendance ❏ Those who tend to postpone compliance with legal revisions ❏ Those who currently have no major complaints but want to know hints for improvement ❏ Those who want to refer to initiatives and examples from other companies

PTC Japan will support the CAR and DRIVER team, a car magazine founded in 1978, which will participate in the 36th "Media Challenge Roadster Endurance Race" held at Fuji Speedway on Saturday, October 4, 2025, continuing from last year.

PTC announced today the release of an AI assistant that supports Arena's Product Lifecycle Management (PLM) and Quality Management System (QMS). The Arena AI Assistant provides context-specific expertise and optimal operational methods in a conversational format in real-time for tasks related to Product Lifecycle Management (PLM) and Quality Management (QMS). This enables user teams to realize value in a shorter amount of time.

The seventh installment of the beginner-friendly 3D CAD Creo Parametric tutorial series focuses on features suitable for designs using frames, such as aluminum and sheet metal. It allows for easy realization of 3D solid structures.

Always able to use the latest features without version upgrade work. Simultaneous design reviews and edits by multiple people are possible, making global/multi-site collaboration easy!