Featured in the June 2008 issue of Environmental Business Magazine: Eco-Advance Oil, an environmental protection oil.

GTL technology, natural gas-based "low environmental impact" motor oil. Long-lasting lubrication, cleaning, cooling, strong sealing, ignition temperature 230°C, non-combustible material, biodegradable.

★Pursuing cost reduction leads to energy savings. Forever Oil promises significant cost savings!★ Eco Advance Oil is a natural gas-based motor oil, making its low environmental impact its most notable feature. With long-lasting durability, it can contribute to various cost reductions. Moreover, what is currently required from motor oils is primarily "biodegradability" and how low environmental impact is achieved through long drain intervals (longevity). This has become the key point. ■ The era of "changing oil because it's black" is over. ■ Additionally, low environmental impact can assist in ISO-14001 certification and the development of corporate CSR.

• Steel
• Sweeping vehicles, grass cutting vehicles, road surface regeneration machines, snow removal machines
• Prime movers, torque converters, hydraulic equipment, generators

Effectively blend powerful cleaning solution and treatment liquid! An engine cleaning liquid that strongly cleans and coats the interior of internal combustion engine oil!

■ Cleaning the inside of the engine and removing sludge is a fundamental step necessary to fully unleash its performance. ■ During oil changes, we developed ★XK Flushing★ to take advantage of the properties of the newly developed ★fatty acid ester★ for the purpose of thoroughly cleaning the interior of internal combustion engines. ■ It possesses a powerful cleaning ability unlike anything seen before, while also coating fine scratches to facilitate the adhesion of lubricating oil films.

• Steel
• Safety and consumables
• maintenance

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

The receiver section of the radio is designed to receive signals properly even when influenced by other radios used in the world, and standards have been established for this purpose, requiring designs that comply with these standards. This time, I will briefly discuss the wireless standards for the receiver section! 【Contents】 ■ Minimum reception sensitivity ■ Adjacent channel selectivity ■ Receiver intermodulation ■ Spurious response ■ Harmonic emission * For more details, please refer to the PDF document or feel free to contact us.

Nihon Jitsugyo Co., Ltd. will exhibit at the "7th Kansai Logistics Exhibition KANSAI LOGIX2026," which will be held from April 8 (Wednesday) to April 10 (Friday), 2026. On that day, we will showcase products that contribute to heatstroke prevention in warehouses and factories in preparation for the upcoming summer heat. You will be able to experience the actual products at our booth, so please stop by. 【Exhibition Overview】 Exhibition Name: 7th Kansai Logistics Exhibition KANSAI LOGIX2026 Dates: April 8 (Wednesday) to April 10 (Friday), 2026 Venue: Intex Osaka Booth Number: C2-02 【Exhibited Products】 - COOL FAN SPOT mini Hieppi - COOL FAN Series - ECO FAN Series *There will also be new products making their debut at the exhibition!