Tunnel lighting of Hoshi and Denki.

LED tunnel lighting (with initial luminous flux correction function) conforms to the LED road and tunnel lighting introduction guidelines (draft) and improves the fixture luminous flux.

The tunnel lighting from Hoshi and Denki adopts long-lasting, high-efficiency white LEDs as the light source, and by incorporating an initial luminous flux correction function, it achieves low maintenance and energy-saving capabilities. ○ It can reduce power consumption and CO2 emissions. ○ Maintenance work that involves traffic regulation can be minimized. Maintenance tasks that require traffic regulation, such as lamp replacement, can be reduced. 1. Long lifespan: 20 years; only one replacement of LED and control device; lifespan of 90,000 hours. The lifespan of the LED module is 90,000 hours, allowing for over 10 years of maintenance-free operation with 24-hour daily lighting. By coordinating the lifespan of the LED module and control device, only one replacement of both will be needed during the 20 years of operation. 2. Lineup: Two types of light distribution and four types of light source capacities. With two types of light distribution and four types of light source capacities, it accommodates a wide range of design speed conditions (40-80 km/h). ■ Ceiling-mounted wide span (CL) …… Two types: LED 50W, 80W ■ Side wall-mounted wide span (BL) …… Four types: LED 40W, 50W, 80W, 100W 3. Supports special dimming: Two-stage dimming capability.

• LED light source/module

LED tunnel lighting (with initial luminous flux correction function) has been improved to comply with the LED road and tunnel lighting introduction guidelines (draft) and enhance the fixture luminous flux.

LED Tunnel Lighting By adopting long-life, high-efficiency white LEDs as the light source and incorporating an initial luminous flux correction function, we achieve low maintenance and energy-saving features. 1. Long Life: 20 years, with only one replacement of the LED and control device; lifespan of 90,000 hours. The lifespan of the LED module is 90,000 hours, allowing for maintenance-free operation for over 10 years with 24-hour daily use. The control device for the LED module is also designed to have a coordinated lifespan, resulting in only one replacement of the LED module and control device during 20 years of operation. 2. Lineup: Two types of light distribution and four types of light source capacities. With two types of light distribution and four types of light source capacities, it can accommodate a wide range of design speed conditions (40–80 km/h). ■ Ceiling-mounted wide span (CL) … Two types: LED 50W, 80W ■ Side wall-mounted wide span (BL) … Four types: LED 40W, 50W, 80W, 100W 3. Supports special dimming: A feature made possible by LEDs, with two-step dimming capability. 4. Initial luminous flux correction function (our proprietary feature). 5. Standard equipped with luminous flux reduction alarm function (our proprietary feature). 6. Modularization of component parts.

• LED light source/module

From June 2025, measures against heat stroke in the workplace have become mandatory. Additionally, in December 2026, a "Support Package for Heat Wave Measures in Construction Work" was formulated, making heat stroke prevention during the summer a pressing issue, especially for those engaged in the construction industry. This time, we provide a collection of heat stroke prevention materials that can be utilized through Sysmet Co., Ltd.'s comprehensive weather platform, ZEROSAI X-AI. Examples of heat stroke prevention measures possible with ZEROSAI X-AI: - Cloud management of heat stroke information - Forecasting of the heat index (WBGT) tailored to the site with a mesh of 500m for up to 17 days ahead - Observation of the heat index (WBGT) in compliance with JIS standards using a black globe thermometer - Alerts for exceeding work standard values for the heat index (WBGT) via electronic bulletin boards, emails, and business chat tools like direct LINE WORKS We hope this will be useful at your sites as well.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have introduced Majesta Fragrance at a cabaret club located in Shizuoka Prefecture. We have selected scents tailored to each space, including the floor, VIP rooms, and restrooms, to provide a total fragrance experience within the establishment. 【Key Points of Introduction】 - Space-specific presentation: By changing the scent for each area, we create a luxurious atmosphere that remains fresh and engaging. - Branding that resonates with the five senses: We support the creation of a venue that is chosen not only for its visual appeal but also for its fragrance. - Offering an extraordinary experience: The moment customers open the door, they are invited into a special time. Majesta Fragrance is also available for free trial installation. If your company or establishment is interested in scent presentation, please feel free to contact us.

A popular garage with power supply, "EV Garage," will open in Tachikawa City. It can be conveniently used with interior lighting and power supply. The full-opening shutter and some models come with shelves for added convenience. Security is also fully equipped, allowing you to use your valuable vehicles, such as motorcycles and cars, with peace of mind. 【Notes on the Premium Type with Power Supply】 - If the electricity usage exceeds 50 kWh/month, an additional charge will be applied. - The maximum output is 20A. Restoration after a breaker trip will be handled at a later date.