We will be exhibiting at the "Hokkaido Civil Engineering and Architecture Future Technology Exhibition" from May 27 (Wednesday) to May 28 (Thursday), 2026.

The mounting width can be easily adjusted! Vertical wall handrail clamps that do not scratch the top or sides of secondary products.

The "ST Clamp" is a handrail holder for fall prevention and safety measures during the construction of vertical retaining walls. 【Are you facing these issues?】 - The installation of handrails for safety measures during the construction of vertical retaining walls is cumbersome. - The width for handrail installation varies by site, and there are no clamps that can accommodate this. - There are concerns about damaging the retaining wall or secondary products. - Multiple workers are needed to install fall prevention equipment, and there is a shortage of manpower. - The stability of the handrail posts is uncertain, raising concerns about meeting safety standards. - Installation and removal take time, reducing work efficiency. - Multiple power tools must be used, making handling cumbersome. - We do not want to invest in expensive equipment for temporary safety measures. - There is wobbling or swaying of the posts, raising safety concerns. The adjustment range is 130mm to 230mm, and it can be easily adjusted with a power screwdriver. Weighing approximately 5kg, it can be installed by one person. It is suitable for safety measures during construction methods such as tail-arm construction. Please contact us if you need assistance. *For more details, please download the PDF or feel free to contact us.

• Subsidiary materials
• Safety and consumables

On-site Non-stop Declaration: Easy! Safe! Speedy! This is the trendy support jack now.

The aluminum gear-type support "Super SS Jack" is an easy-to-extend and retract jack for earth retention work, which can be operated with an electric screwdriver or wrench. With the use of an electric screwdriver, it can be adjusted to the desired extension in about 5 seconds, significantly increasing work speed. The scale display on the jack allows for easy length adjustment at a glance. Unlike conventional hydraulic jacks, it does not require a hydraulic pump, enabling cost savings on anti-rust fluid and antifreeze. It also resolves issues related to construction interruptions caused by water leaks or winter freezing. With its gear structure, there is no worry about the jack shrinking due to water leaks, as is the case with hydraulic jacks. Using a dedicated work rod, it can be installed and removed from the ground without entering the excavation site. It offers a wide range of options suitable for various environments (minimum 390mm to maximum 3200mm), with the ST type featuring a maximum length of 4200mm added to the lineup. 【Features】 ■ Compliant with the earth retention pre-construction method recommended by the Ministry of Health, Labour and Welfare ■ Safe to use in winter without worries about freezing ■ Gear structure makes it less prone to failure and easy to maintain ■ Can be installed and removed from the ground without entering the excavation site using a work rod ■ No shrinking of the jack due to its gear structure! ■ Available for rental (nationwide service)

• Scaffolding and Support Materials
• Water Supply Facilities
• Earth retaining support

【NETIS】Streamlining the installation of scaffolding on vertical and sloped surfaces. An ultra-lightweight aluminum scaffolding bracket for vertical and sloped surfaces, weighing only 4.3 kg and resistant to rust.

The "Alwalk" is an aluminum vertical slope scaffold bracket that combines work efficiency, versatility, and safety. No assembly is required; just insert the pin! It can be attached to 48.6Φ single pipes, 50mm square pipes, and 60mm square pipes. By using options, it can be attached to the top edge, to 5-minute and 6-minute bolts, and to vertical walls and sloped walls (such as tail arms, super tail arms, and other vertical and sloped walls), allowing for various adjustments in installation height. It is suitable for high-altitude work in retaining wall construction for bridges, dams, sediment control embankments, and breakwaters, as well as for scaffolding for final inspections. 【Features】 - Compatible with 48.6Φ single pipes, 50mm square pipes, and 60mm square pipes (hooks can be removed) - Supports slope angles from vertical to approximately 10% incline - Can be directly attached to concrete structures - Easy installation of handrails - Available for rental (nationwide service)

• Scaffolding and Support Materials

[NETIS Registered Product] A scaffolding bracket that can be easily installed by simply inserting and tightening it into a drainage pipe! Significantly reduces the time required for installing retaining wall scaffolding.

The "Drainage Pipe Scaffolding" is a scaffolding bracket specifically designed for the installation of drainage pipes, which can be easily set up by simply inserting it into the drainage pipe and tightening it. It is suitable for inspection and repair of retaining walls, as well as for final inspections, and it streamlines the scaffolding installation process. 【Features】 ■ Fixed by simply inserting into the drainage pipe and turning the nut ■ Compatible with pipes ranging from 50mm to 100mm in diameter ■ Can accommodate pipe slopes of up to 25° ■ Foldable design reduces storage space and transportation costs ■ Easy installation of handrails with just bolt fastening ■ Available for rental (nationwide service) *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

Asphalt tape that can be used as crack sealant, water stop material, and joint material for extending the lifespan of pavement!

The asphalt sealant "Quick Seal" is an easy-to-use asphalt tape that can be applied simply by lightly warming it with a burner to make it adhere. It adheres well even without a primer. It can be used for crack repairs, seal coats, and side tack coats. This product is designed to prevent rainwater from entering through cracks and joints in asphalt, aiming to extend the lifespan of the pavement. 【Features】 ■ Passes -34℃, suitable for use in cold regions ■ 1.6mm thickness allows for easy bending ■ Finishes neatly as an alternative sealant to emulsions ■ Adheres well even without using a primer ■ Strong adhesion prevents rainwater intrusion ■ Waterproof, can also be used as a water-stopping material 【Product Specifications】 ■ Width 6cm × Thickness 1.6mm × Length 15m *For more details, please refer to the PDF document or feel free to contact us.

• Paving Materials

With the ease of 2D, towards the future of 3D.

The new 2D model "iDig Connect2D" has arrived in the retrofittable backhoe machine guidance "iDig" series! Maintaining the advantages of the previous model "iDig Touch2D," such as "no wiring required," "solar charging," and "easy to switch," this is an "expandable 2D system" that is also prepared for future 3D construction. 【Features】 1. "Scalable 2D" - 3D upgradeable By simply adding a GNSS antenna and other components, it can be upgraded to 3D. This allows for a phased investment approach of "first introducing 2D → upgrading to 3D as needed." 2. Compatible with swing boom and tilt rotator Strong in narrow spaces and complex slope construction, making it ideal for urban job sites. 3. Dynamic laser catch function The response speed of laser reception has dramatically improved. Smooth continuous construction can be achieved without stopping work! This model is perfect for companies that want to improve current construction efficiency while also looking to the future.

• others

Lightweight aluminum vertical incline scaffolding bracket! Weighs only 4.3 kg per unit, about 2/3 of steel products! (Comparison with our own products)

This is an aluminum vertical slope scaffold bracket that combines work efficiency, diversity, and safety. No assembly is required; just insert the pin! It can be attached to 48.6Φ single pipes, 50mm square pipes, and 60mm square pipes. By using options, it can be mounted to the top edge, attached to 5-minute and 6-minute bolts, and installed on vertical walls and sloped walls (such as tail arms, super tail arms, and other vertical and sloped walls). Using single pipes, handrails can also be easily set up. With options, handrails can be installed inward as well. It is suitable for high-altitude work in retaining wall construction for bridges, dams, sediment control embankments, and breakwaters, as well as for final inspection scaffolding. 【Features】 - Compatible with 48.6Φ single pipes, 50mm square pipes, and 60mm square pipes (hooks can be removed) - Supports slope angles from vertical to approximately 10% incline - Can be directly mounted to concrete structures - Handrails can be easily installed - A variety of optional items are available - Rental available (nationwide service) *For more details, please contact us or download the catalog.

• Scaffolding and Support Materials

Solar power generation is entering a scalable era— Have you given up on introducing solar power generation, or are you thinking, "I want to implement it more smoothly"? "Installation constraints," "enormous costs," "prolonged procedures"... By breaking through the "grid connection barriers" that hinder such introductions, you can start with what you need and expand your facilities flexibly as your business grows. The next-generation "distributed power source = off-grid system" makes such "scalable" solar power generation a reality. In this webinar, we will thoroughly explain the mechanism of "non-grid-connected self-consumption" that is not bound by existing frameworks, and present new options and the latest case studies to solve management challenges. We invite everyone considering the introduction of solar power generation to participate!

Tokyo Big Sight (West Hall 1-2) Booth Number: G13-31 Event Dates: May 13 (Wed) - 15 (Fri), 2026 Opening Hours: 10:00 AM - 5:00 PM We will be showcasing our earthquake preparedness products. Live demonstrations of the actual products will be conducted, so please come and take a look if you're interested. We look forward to your visit.

We will provide a clear explanation in a Q&A format based on the inquiries and examples received so far regarding "Headless CMS," addressing the questions that web managers truly want to know. Using the Japanese-made headless CMS "microCMS" as a subject, we will organize the key points for implementation and operation. ■Recommended for: - Public relations, marketing, digital promotion, and information systems personnel considering the introduction or replacement of a CMS. - Those interested in headless CMS but lacking a clear image of actual operations. - Individuals who want to understand the differences from traditional CMS and specific points to consider during implementation. - Those experiencing challenges with updating their company website, security, display speed, and operational load. *Please refrain from applying if you are from a competing company or an individual in the same industry. ■Agenda 1. Specifics of Headless CMS: Demo & Case Studies 2. Q&A Explanation: Utilizing Headless CMS for Corporate Websites 3. Introduction of MLC "Headless CMS Package" 4. Q&A Session *Please note that the contents of the above agenda may change without prior notice. Thank you for your understanding.

This is the 8th edition of the exhibition, which has become an internationally diverse event with many overseas companies participating. This year, we will only be exhibiting in indoor booths, but we have significantly expanded the size of our booths and will welcome everyone with more comprehensive display content. We will be co-exhibiting again this year with Great Star Japan Co., Ltd. 【Exhibited Products】 iDigTouch2D iDigConnect2D iDigConnect3D 【Highlights】 New Product "iDigConnect2D" Our highlight this time is the new product "iDigConnect2D." While Touch2D is a model that allows for easy implementation of 2D construction, Connect2D is a next-generation model with excellent expandability. By adding a GNSS antenna, it can be upgraded to 3D machine guidance in the future, allowing for a smooth transition from 2D to ICT construction. It also supports a swing boom mechanism, enabling accurate height display even when the boom is swung. It maintains high precision even in narrow sites and complex construction. 【Booth Number】 02-11 (Exhibition Hall 1)

We are pleased to announce that Hoshin will be making its first exhibition at the "Hokkaido Civil Engineering and Architecture Future Technology Exhibition"! We will be exhibiting with two booths: the Hoshin booth and the iDig booth. The iDig booth will be a joint exhibition with Great Star Japan Co., Ltd. We will showcase a wide range of content, from safety measures on site to the latest technologies, so please come and visit us! <Exhibition Booths> - Hoshin Booth: 2 sections - iDig Booth: 1 section (Mirai Collection 2026)