"CUT" has won the iF Design Award, one of the three major design awards in the world.

A new aluminum frame that won the 2019 Good Design Award! It has a light impression that seems to float from the wall, making it suitable for interiors in hotels and commercial facilities.

"CUT" is a frame and panel that has a sharp impression with its edges cut off. When viewed from the front, it allows you to focus on the artwork without being overly aware of the frame, and when viewed from an angle, the beveled sides create a light impression as if it is floating from the wall. Despite its slim profile, it can accommodate artworks up to 5mm thick, making it suitable for various pieces such as photographs, posters, and contemporary art. It also serves as an elegant interior frame for hotels, museums, and commercial facilities. 【Features】 ■ Available in large sizes of A1 and above ■ Conveys the texture and luxury of aluminum ■ Accommodates artworks up to 5mm thick despite its slim design ■ Winner of the Good Design Award 2019 ■ UV acrylic used for all sizes *For more details, please refer to the PDF document or feel free to contact us.

• Spatial Design
• Signs, banners, lanterns, and curtains
• Office supplies and stationery

An article has been published about winning the highly recognized "2020 Asia Design Award," a global design award!

Our company, which specializes in the manufacturing and sales of picture frames, has won this year's "Asia Design Award," a globally recognized design award, for our ALUMIUM series 'CUT.' The feature of 'CUT' is that it is cut at a 45-degree angle from the outside towards the inside. It gives a thinner and sharper impression than its actual size, and depending on the viewing angle, the sides may become invisible. This creates a light and floating impression from the wall. Additionally, when light hits the cut inner surface, it not only illuminates the surrounding artwork but also creates a sense of tension. *For more details, please refer to the PDF document or feel free to contact us.*

• Spatial Design
• Mural
• others

I want to beautifully display two signed uniforms in a limited space! I measured the area and made the necessary arrangements.

I want to beautifully display two signed soccer player jerseys. However, the space in the showcase is limited. Is this possible? We addressed such inquiries. After confirming the locations of the signatures, we took measurements and were able to fit them perfectly inside the showcase. Although it is not visible in the photo, we used a one-legged stand to display them in a way that prevents them from falling backward, due to the depth of the showcase. 【Case Summary】 ■Challenge - To beautifully display two signed jerseys in a limited space. ■Result - After confirming the locations, we took measurements and were able to fit them perfectly inside the showcase. *For more details, please refer to the related link page or feel free to contact us.

• Decoration and performance supplies
• Interior wall decoration
• Flag hardware and decorative hardware

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

On our company's website introducing vehicle detection sensors, you can easily find products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." [Introduction to Vehicle Detection Sensors] The sensors detect the passage of vehicles and notify you with a rotating light or switch the display of parking availability. They contribute to safe driving within parking lots and smooth operational management. They are used in various areas, from coin-operated parking to large-scale parking lots. We will continue to improve our webpage to provide information about Hotron's "Vehicle Detection Sensors."

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.