Notice of Summer Vacation: Regarding Inquiries About Spray Dryers

MMSD MDL-015（C）MGC-S

GF Corporation's "MMSD Micro Mist Spray Dryer MDL-015 (C) MGC-S" is a compact spray drying device for laboratories that is compatible with organic solvents. It is particularly strong in verifying small sample sizes, capable of instantly generating liquids into fine particles of less than 10 microns, and is part of our original MMSD series. # Main Features of MDL-015 (C) MGC-S - Compatibility with organic solvents Safe spray drying of organic solvents can be performed under a nitrogen atmosphere. It is also compatible with low boiling point solvents, making it useful for a wide range of research and development. - Generation of single micron fine powders It employs a "four-fluid nozzle" that can spray the smallest droplet diameter in the industry, producing sharp particles of single microns (up to 10um) in the dried powder. - Capability for experimental verification with small samples It is suitable for verification on a small scale, allowing efficient experimentation even with small amounts of valuable samples.

• others

MMSD MDL-050: Supports everything from research and development to small-scale production! High-performance spray dryer.

GF Corporation's "MMSD Micro Mist Spray Dryer MDL-050 (C) M" is our original spray drying device capable of instantly generating large quantities of liquid as fine particles below 10 microns. # Main Features of MDL-050 (C) M - Generation of Single Micron Fine Powder The device employs a "four-fluid nozzle" that can spray with the smallest droplet diameter in the industry, producing sharp particles of single micron (up to 10um) in the dried powder. It is ideal for drying lithium-ion battery materials, poorly soluble compounds, and heat-sensitive components. - Efficient Sample Work through Continuous Operation Designed for continuous operation, it allows for efficient handling of everything from small-scale tests to large sample work. - Easy Operation and High Sanitation The operation is intuitive via a touch panel, and the operating status can be easily checked at a glance. Additionally, it excels in sanitary properties, with easy disassembly and assembly for straightforward cleaning. - Selectable Collection Methods The sample collection method can be switched between "single-point collection with a bag filter" and "two-point collection with a cyclone and bag filter," allowing you to choose based on your application needs.

• others

Instant generation of particles smaller than 10 microns! Innovative powder manufacturing achieved by GF's spray dryer.

The Micro Mist Spray Dryer "MMSD" is an innovative spray drying device that generates liquids into fine particles. With its unique nozzle technology, it is capable of instantly producing large quantities of particles smaller than 10 microns. It contributes to the micronization and powder manufacturing of various materials, including lithium-ion battery materials, poorly soluble compounds, and heat-sensitive components. ◇ Features - Capable of drying fine particles (submicron). - Can handle large samples with continuous operation. - Compatible with organic solvents. - A wide range of options from small-scale testing to mass production. ◇ Solving these challenges - Want to create powders with uniform particle size. - Want to efficiently dry heat-sensitive materials. - Need a device that can accommodate everything from small-scale prototypes to mass production. Please feel free to contact us!

• others

Innovative powder manufacturing realized by MMSD (Micro Mist Spray Dryer)

●What is a spray dryer? A spray dryer is a device that turns liquid raw materials into fine powder. Specifically, it uses a nozzle to create a fine mist from liquid raw materials such as solutions or suspensions. This mist is then brought into contact with high-temperature gas (usually air), causing the liquid components like moisture to evaporate instantly, resulting in dried fine powder. ●Why can it dry? When the liquid becomes a fine mist, the surface area increases dramatically. This increases the contact area with the high-temperature gas, allowing heat to be transferred efficiently, which causes moisture to evaporate instantly. Additionally, because the drying time is very short, even heat-sensitive materials can be dried at relatively low temperatures.

• others

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

We will be exhibiting at Offshore Tech Japan (Marine Industry Technology Exhibition 2026) (Booth Number: 1S-S06). In this exhibition, we will introduce our services utilizing marine robots such as autonomous surface vehicles (ASVs) and underwater drones for marine surveys, seagrass bed surveys, ocean and wind condition surveys related to offshore wind power, and the collection of dead fish in aquaculture operations. Event Dates: January 28 (Wednesday) to January 30 (Friday), 2026 Location: Tokyo International Exhibition Center "Tokyo Big Sight," South Exhibition Hall, South 1 Hall (Koto City, Tokyo)

A dialogue video featuring Representative Director and President Nori Yamaguchi and announcer Sakiko Nojima discussing the future of the industry has been released. ▼Watch the video here (on our YouTube channel) https://www.youtube.com/watch?v=tArTwkgChYs *You can also watch it from the "Related Links" below. Japan, said to have the highest disaster risk in the world, faces aging infrastructure. We delve into the behind-the-scenes of a vision aimed at addressing this issue with technologies such as "pipe rehabilitation technology" that revives pipes without digging roads, and automation through AI and robotics. 【Main Topics】 ● "Pipe rehabilitation technology" that revives sewer pipes without digging roads ● The role of sewers and responses to landslide disasters ● Construction DX: Going global with AI and robotics ● A new 4K industry: A message to the youth

SBS Marketing Co., Ltd., which provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector based on practical experience in support companies and business companies, has published a page titled "Is it perceived extremely as 'zero or one hundred' or 'white or black'!? 'Zero-Sum Bias'" on December 23, 2025 (Tuesday). The 'Zero-Sum Bias' is a way of thinking that judges things as 'white or black', 'win or lose', 'zero or one hundred', or 'gain or loss', narrowing down choices to 'extreme two options'. The page explains the mechanisms behind its occurrence and methods to overcome it. (Page Overview: Excerpts) ■ What is 'Zero-Sum Bias'? ■ Negative effects caused by 'Zero-Sum Bias' ■ Why does 'Zero-Sum Bias' occur? ■ How to overcome 'Zero-Sum Bias'? (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/zero-sum-bias-2025-12/