History of Space Development | A Timeline of Aerospace Progress and Future

Over 30 years of proven track record and experience-backed high-reliability data bus for aerospace applications.

DDC/PDC (Data Device Corporation / Power Device Corporation) is a global company that boasts the top market share in Japan for data bus products compliant with the important aviation communication standard MIL-STD-1553B. With a history spanning over 50 years, it is one of the leading manufacturers in the data bus industry worldwide. DDC/PDC primarily designs and manufactures data bus products such as 1553 and ARINC429, as well as power and control solutions. All of their products are characterized by high reliability and are widely adopted in fields such as aerospace and defense, where safety is of utmost importance.

• others
• Information and communication equipment and infrastructure

PDC's single-board computer has been installed on a tracking satellite for the U.S. Space Force! (October 2024)

PDC announced that its SCS3740 single-board computer (SBC) has been installed on the tracking satellite of the U.S. Space Force's Space Development Agency (SDA), which was launched into low Earth orbit (LEO) aboard a SpaceX Falcon 9 rocket in February, manufactured by L3Harris Technologies. *For more details, please refer to the related link. Feel free to contact us for more information.*

• IT Control and Services

Keep the main systems of the infrared telescope at a temperature 600°F lower than the side facing the Earth, Moon, and Sun!

Bohemia, New York (December 2021) DDC - NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA) announced the successful launch of the James Webb Space Telescope (JWST) on December 25. The JWST is one of the largest space telescopes in the world, allowing astronomers to study the origins of the solar system and distant galaxies, far surpassing the capabilities of the Hubble Space Telescope. While the Hubble Space Telescope operates in low Earth orbit (540 km), the JWST's infrared telescope is designed to move far away to the Lagrange point (L2) between the Earth and the Sun, located 1.5 million km (940,000 miles) from Earth. The project incorporates radiation-hardened components from DDC/PDC, including Rad-Hard, SBC, and 1553 products. *For more detailed information, please refer to the related links. For further inquiries, feel free to contact us.*

• others

Next-generation smart power management! Solid State Power Controller (SSPC)

The next-generation fighter jets attracting attention in Japan, along with unmanned aerial vehicles linked to them, have seen remarkable advancements in large aircraft recently. In this field of large aircraft, the "SSPC" is gaining global attention as a power management device. In this article, we have received an explanation of the features and benefits of the SSPC from DDC/PDC, experts in the defense and aerospace sector. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.*

• Batteries and Capacitors

Hear from experts about the forefront of advanced technologies such as next-generation fighter jets, drones, and satellites!

"TSN (Time-Sensitive Networking)" is already being used in industrial equipment. Are you aware of the advanced communication standard "TSN for Avionics," which has evolved and is now attracting attention? TSN for Avionics, which is expected to play a wide role in the aerospace sector, including next-generation fighter jets, advanced drones, and satellites, is reportedly already in the practical stage in the United States. We spoke in detail with experts from DDC, a company that boasts a top-class share in Japan for MIL-STD-1553, about this advanced communication standard, TSN for Avionics. *For more detailed information, please refer to the related links. Feel free to contact us for more details.

• others

Proven Reliability Required in the New Era of the Space Market: What is the Space SBC 'SCS3740' from DDC/PDC?

Space is becoming more accessible, with private space travel taking place. In particular, "deep space" is attracting significant attention in modern times. This article will introduce space SBCs (single-board computers) that are active in space/deep space, including their use cases, important features, and notable products from DDC/PDC, a company with extensive experience in space applications. *For more detailed information, please refer to the related links. Feel free to contact us for more details.*

• others

"RAD-PAK," which excels in radiation resistance, offers a rich lineup including memory, A/D converters, and multiplexers (MUX).

Space development requires stable operation in harsh environments that differ from those on Earth. Radiation resistance is one of the essential elements in space development. We spoke in detail with experts from the global manufacturer DDC/PDC about "RAD-PAK," which offers a wide range of products, including memory and A/D converters, that excel in radiation resistance. *For more detailed information, please refer to the related links. Feel free to contact us for more details.*

• others

Collaboration with L3Harris in the WFIRST program! Supporting advancements in space exploration.

Bohemia, New York (September 2019) - Data Device Corporation (DDC) announced that it has been selected by L3Harris Technologies to provide high-reliability motion control synchro/resolver-digital (R/D) conversion components for the electronic box used to control the Wide Field Infrared Survey Telescope (WFIRST). NASA is designing WFIRST to address fundamental questions in the fields of dark energy, exoplanets, and infrared astrophysics. *For more details, please refer to the related link. Feel free to contact us for more information.

• others

DDC products mounted on Boeing's CST-100 Starliner space capsule.

Bohemia, New York (September 2019) - Data Device Corporation (DDC) announced the addition of the compact and high-performance (1700 DMIPS, 90 Linpack MFLOPS) SWaP (Size, Weight, Power) optimized 3U SpaceVPX to its proven single-board computer (SBC) product line for space applications, offering many memory and I/O options, including: (8) General-purpose SpaceWire ports (up to 200 Mbps each), (1) SpW debug port, (2) UART (RS-422 or LVDS), (2) CANbus, (2) I2C, (1) SPI, GPIO, (1) 1553 (external PHY required), Ethernet. The SCS3740 is a commercially available quad-core LEON 4FT 3U SpaceVPX SBC, optimized for SWaP in a compact form factor weighing 550 grams, with a power consumption of just 5 watts. *For more details, please refer to the related links. Feel free to contact us for more information.

• others

Proven reliability! Use with confidence in critical missions.

This article features the announcement of DDC products to be used in the Mars 2020 mission's "Perseverance Rover" and the Mars Sample Return mission "MMX." It also introduces DDC's single-board computers, space-grade memory, and nuclear material detectors. Bohemia, New York (March 2021) - DDC announced that Kawasaki Heavy Industries (KHI), the developer of the Mars Moon Exploration (MMX) sample collection operation system, has adopted DDC's SCS750G4 single-board computer (SBC) for JAXA's MMX program. *For more details, please refer to the related links. Feel free to contact us for more information.*

• others

Full-scale practical application progressing in the United States! It can continue normal operation even in the event of a failure.

We will introduce the features of 'TSN for Avionics,' which is progressing towards practical application, centered around the IEEE in the United States. Based on Ethernet, it allows for the setting of communication priorities and achieves communication with virtually no delay, similar to MIL-STD-1553B. Additionally, with synchronization, a single piece of data can be distributed to multiple devices at the same time, making it possible to realize data fusion tailored to future project needs. There are many other features as well. More details are provided in the related links, so please take a look. 【Features】 ■ Real-time capability ■ Synchronization ■ Redundancy ■ Cybersecurity ■ Wide bandwidth and versatility *For more details, please download the PDF or feel free to contact us.

• others

Components with groundbreaking cyber resilience! Achieving security for aerospace and defense applications.

Bohemia, New York, March 2024 - Today, DDC announced its advanced innovation, the MIL-STD-1553 component with cyber resilience, marking a groundbreaking advancement in electronic component technology. The newly introduced Total-ACE CR component is a replacement for DDC's BU-64863T8 Total-ACE. By encapsulating a robust 1553 protocol interface layer, integrated memory, dual transceivers, and a transformer in a cost-effective plastic BGA package, and adding a hardware watchdog to mitigate inherent cyber vulnerabilities within the MIL-STD-1553 protocol, this electronic component achieves an unprecedented level of reliability and security. *For more details, please refer to the related links. Feel free to contact us for more information.

• others

Equipped with DDC products! Adopted for critical systems based on reliability, performance, and robustness.

Bohemia, New York (August 2022) - Data Device Corporation (DDC) announced that its MIL-STD-1553 data bus components have been installed in Boeing's CST-100 Starliner spacecraft. As part of an uncrewed orbital test flight, the CST-100 successfully performed a docking maneuver with the International Space Station (ISS) and is scheduled to transport astronauts and cargo to the ISS in the future. DDC's MIL-STD-1553 transceivers and transformers are utilized in the Starliner's Crew Module Integrated Propulsion Controller (CM-IPC) and Service Module Integrated Propulsion Controller (SM-IPC). *For more details, please refer to the related links. Feel free to contact us for more information.

• others

Ideal for high-performance position control systems that require real-time high-precision resolution!

Bohemia, New York (November 2019) - Data Device Corporation (DDC) announced a redesigned version of its popular Synchro/Resolver 2 speed combiner, featuring 3.3V I/O in a compact and highly efficient FBGA (Fine Pitch Ball Grid Array) package. The SD-15901 FBGA design reduces the footprint by 34% compared to the previous generation and saves power by 35%, optimizing space and power, and facilitating assembly through PCB layout SWaP optimization and BGA surface mounting. *For more details, please refer to the related links. Feel free to contact us for more information.

• others

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

We will be exhibiting at Offshore Tech Japan (Marine Industry Technology Exhibition 2026) (Booth Number: 1S-S06). In this exhibition, we will introduce our services utilizing marine robots such as autonomous surface vehicles (ASVs) and underwater drones for marine surveys, seagrass bed surveys, ocean and wind condition surveys related to offshore wind power, and the collection of dead fish in aquaculture operations. Event Dates: January 28 (Wednesday) to January 30 (Friday), 2026 Location: Tokyo International Exhibition Center "Tokyo Big Sight," South Exhibition Hall, South 1 Hall (Koto City, Tokyo)