The non-drying polyolefin-based one-component water stop agent Tome Taro® has been officially registered under "NETIS" in the KT jurisdiction.

[NETIS Registered Product] We appreciate your continued support for leak prevention and measures against water leakage in hand holes after installation, as well as in various penetrations and diverse gaps in structures.

TometaroⓇ is a non-curing, polyolefin-based water stop putty for leak prevention and repair. It adheres firmly to resin, rubber, metal, and concrete, making it a versatile water stop material that can also be applied in flowing water conditions. It is suitable for leak prevention in electrical equipment handholes and cable/pipeline penetration areas. It is resistant to salt, acid, and alkali, and does not cure after opening, allowing for long-term storage within specified conditions. ◎ R2.6 Issued 'Guidelines for Flood Prevention Measures for Electrical Equipment in Buildings' ◎ <Features> ■ Heat resistance up to 90°C, stable water stop without yielding to high-pressure cables ■ Putty alone/water-tight performance of 0.05 MPa (with optional use, 0.15 MPa) ■ Can be used even during leaks (in flowing water) ■ Consideration for cable re-pulling, allowing for removal and re-filling ■ Unlike curing water stop materials, it has no curing shrinkage and can continuously stop water ■ A sense of security with a wealth of adoption results in both public and private sectors ■ Safe rodent prevention, blocking rodent intrusion ■ A wide range of options to accommodate various situations ■ "Japan Quality: NETIS Product" trusted quality ■ Ecology & Safety, friendly to people and the environment *For details, please request a catalog via "Contact Us" or view the PDF data from "Download"

• Waterproof tape, adhesive, drain, protective panel
• Piping and electrical wiring materials
• Piping materials (plastic pipes)

Waterproofing measures: Can be applied even in flowing water conditions (after leakage, during water flow)! Non-hardening waterproof putty, suitable for hand holes/cable and pipe penetrations for various types of leaks.

TometaroⓇ is a non-curing, polyolefin-based waterproofing putty for leak prevention and repair. It adheres firmly to resin, rubber, metal, and concrete, making it a versatile waterproofing material that can also be applied in flowing water conditions. It is suitable for leak prevention in electrical equipment handholes and cable/pipeline penetration areas. It is resistant to salt, acid, and alkali, and does not cure after opening, allowing for long-term storage within specified conditions. ◎ R2.6 Issued "Guidelines for Flood Prevention Measures for Electrical Equipment in Buildings" ◎ <Features> ■ Heat resistance up to 90°C, stable waterproofing without yielding to high-pressure cables ■ Putty alone/waterproof performance of 0.05MPa (with options, 0.15MPa) ■ Usable even during leaks (in flowing water) ■ Consideration for cable re-entry, allowing for removal and re-filling ■ Unlike curing waterproofing materials, it does not shrink upon curing, allowing for continuous waterproofing ■ A sense of security with a wealth of adoption records in both public and private sectors ■ Safe rodent prevention, blocking rodent intrusion ■ A wide range of options to accommodate various situations ■ "Japan Quality: NETIS Product" trusted quality ■ Ecology & Safety, friendly to people and the environment *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

• Waterproof tape, adhesive, drain, protective panel
• Piping and electrical wiring materials
• Piping materials (plastic pipes)

"Shut out water and mice" Stop Water Material TometaroⓇ "Mouse prevention measures at the same time!" Recently, water disasters have been increasing dramatically. Implement mouse prevention along with water stop measures!

Non-drying polyolefin-based one-component water-stopping putty agent TometaroⓇ TometaroⓇ offers a proposal for "environmental control" against rodents. Structures have various environments that attract rodents (such as pipe penetration areas), and as long as these environments exist, rodent control will continue indefinitely. Therefore, we recommend "TometaroⓇ (water-stopping material)" for easy, safe, and highly sustainable pest control! After years of research, it has been proven to provide "water intrusion measures (waterproofing) - leak prevention and leak repair" along with "humane rodent control." <Features of Tometaro for Rodent Control> ■ "Basically no maintenance required" It does not contain any repellent chemicals. TometaroⓇ physically blocks the entry points. (This does not apply if there is already a history of rodent intrusion into the building.) ■ "Humane" Since no chemicals are used, there is no skin irritation during handling. ■ "Rodent control along with water intrusion measures (waterproofing)" TometaroⓇ, a non-hardening water-stopping putty agent originally developed for water intrusion measures, addresses both issues simultaneously. *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

• Pest and insect control products
• Piping and electrical wiring materials
• Piping materials (plastic pipes)

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

We sincerely apologize for the inconvenience, but we will be closed for the year-end and New Year holidays during the following period. Closure period: December 30 (Tuesday) to January 4 (Sunday) We will resume normal operations on January 5 (Monday), 2024. We appreciate your understanding during this time and thank you for your patronage this year. We wish you all happiness and prosperity. We will continue to strive to provide better services in the new year. Aitec System Co., Ltd.