*★*―――Notice of GW Holiday Closure [2025]―――*★*

In as little as 3 days to the necessary site. We have started the ready-made sales of glass-inserted specific fire prevention equipment "TanaFire."

:*・゜☆。.:*・゜☆。.:*・゜.:*・゜☆:*・゜☆。.:*・゜☆。 Fastest delivery in 3 days! (Depending on the delivery area) New release of ready-made Tanaphire! .:*・゜☆。.:*・゜.:*・゜☆:*・゜☆。.:*・゜☆。:*・゜☆。 In the unlikely event that on-site, "There’s a change in the section, and we need to switch to glass-enclosed fire protection equipment!" "I want to brighten the space with glass instead of regular flush doors...?" "We received a notice from the fire department!!" Even if such incidents (or rather, events) occur, don’t worry! We will handle that glass-enclosed fire protection equipment! We have started selling the glass-enclosed fire protection equipment certified by the Minister of Land, Infrastructure, Transport and Tourism, "Tanaphire," through our online shop, mainly for contractors who can perform painting and installation work in-house! The size and specifications are fixed, but the frame, door, and hardware come as a full set. The glass in the door is already installed, so it can be mounted immediately upon arrival. The painting, including rust prevention, is also completed, allowing for finishing touches on-site! Shipping is free except for some regions and remote islands. We will deliver the three packages of frame, door, and hardware to sites struggling with delivery times. For more details, please check our website or catalog!

• Steel Door

Certified steel fittings with glass inserts. Transforming invisible doors into visible ones! When combined with heat-resistant glass, they allow visibility inside, proving effective for rescue and evacuation activities during a fire!

TanaFire F is a specific fire protection equipment created by combining heat-resistant crystallized glass (Firelight). 【Features】 ○ It is transparent, making it effective for rescue and evacuation activities during a fire. ○ The heat-resistant crystallized glass "Firelight" has a thermal expansion coefficient close to zero and is a material that is strong against thermal shock, as it does not break even when heated to 800°C and then doused with cold water. ○ Various shapes of steel doors/windows and stainless steel doors/windows have obtained individual certification. * While it is strong against heat, its impact strength is equivalent to that of regular float glass. ● For other functions and details, please download the catalog. ◇ TanaFire F "Ready-Made TanaFire" Sales Start ◇ We have started selling ready-made TanaFire. We will deliver TanaFire with free shipping in as little as 3 days (depending on the region). ■ Specifications Dimensions: W900×H2100 Frame Shape: Frame / Slit Coating: Up to rust-proof coating (finishing separately) Hardware: Lever handle, DC, lock (3 keys), with door stop * Installation of some hardware and the main fittings is separate. * For details, please refer to the sales website and catalog below.

• Steel Door
• Steel sash
• Stainless steel sash

Tanaka Sash Industry Co., Ltd. has continued to create safe and comfortable living environments in buildings and residences with its steel door and window products.

Since our founding in 1920, we have continued to create safe and comfortable living spaces in buildings and homes through the manufacturing of steel fittings. We respond fully to the evolving and sophisticated needs of our customers with advanced technology and cutting-edge research and development capabilities. We uphold our belief in quality-first manufacturing and continue to challenge ourselves towards new creations for the future. We always return to the origins of our founding and will further advance our efforts to become a trusted company. We remain committed to a quality-first principle while also considering the environment and pollution. We have introduced a production line with state-of-the-art equipment, always aiming for quality. We value advanced technology and development capabilities, and we approach our work with a spirit of challenge. *For more details, please refer to the PDF document or feel free to contact us.*

• Entrance/Exterior Doors
• Soundproofing/Shielding Unit

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.