We participated in the 29th Okayama Research Park Research and Exhibition Presentation and conducted a panel exhibition.

[39th NePCON Japan Domestic Debut] Supports inspection of high-density printed circuit boards with industry-leading accuracy! New model of flying probe tester.

Takaya Corporation announces the new model of its flying probe tester, "APT-2400F/APT-2600FD series," which reliably detects various defects in printed circuit boards through ultra-fast inspection. Equipped with cutting-edge inspection technology that can check fine component placements and connections with high precision, it ensures that even minor defects and risks are not overlooked, strongly supporting product quality improvement. Additionally, thanks to our unique control mechanisms and sensing technology, reliable inspections can be achieved even in fluctuating environments, contributing to quality management by reducing recall risks. Furthermore, the user-friendly interface allows anyone to operate it intuitively, helping to alleviate burdens in workplaces where labor shortages are becoming serious, while still ensuring high inspection accuracy and contributing to increased productivity. *For more details, please download the PDF document or feel free to contact us.*

• Other measuring instruments

Equipped with a high-performance measurement system and a variety of functions, it contributes to quality improvement from prototyping to mass production!

The APT-2400F boasts industry-leading probing accuracy capable of inspecting high-density mounted circuit boards, and through its unique control mechanisms and sensing technology, it achieves highly reliable electrical testing in all environments. It is the next-generation flying probe tester. We accept evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch, where you can bring in your circuit boards. We can conduct a series of tests including the creation of inspection programs, testing with actual circuit boards, and summarizing evaluation results. *For more details, please feel free to contact us.

• Other measuring instruments

Equipped with a high-performance measurement system and a variety of functions, it contributes to quality improvement from prototype to mass production!

The APT-2400F-SL is a large model that retains the basic performance of the APT-2400F while expanding the compatible board size to W635×D610mm. Additionally, by adding an optional split inspection function, it can inspect long boards up to W985×D610mm. It can accommodate component heights of 60mm on the top and 120mm on the bottom, and can handle board weights of up to 15kg, making it suitable for inspecting large and heavy boards such as those used in automotive, aerospace, medical devices, power supply boards, and probe cards. We accept evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch, where you can bring your boards for testing. A complete testing process is possible, including the creation of inspection programs, inspection using actual boards, and summarizing evaluation results. *For more details, please feel free to contact us.

• Other measuring instruments

A new innovation in substrate manufacturing. Achieving improved production efficiency and inspection accuracy!

The APT-2600FD is a next-generation dual-side flying probe tester that can perform combination testing with up to 6 probes using both upper and lower flying probes simultaneously. It improves test coverage while reducing the risk of product damage due to board flipping operations, significantly shortening inspection time. Equipped with a high-performance measurement system and a variety of features, it contributes to quality improvement from prototype to mass production. We accept evaluation tests at our demonstration rooms in Okayama headquarters and Tokyo branch, where you can bring in your boards. A complete testing process is possible, including the creation of inspection programs, testing using actual boards, and summarizing evaluation results. *For more details, please feel free to contact us.

• Other measuring instruments

A new innovation in substrate manufacturing. Achieving improved production efficiency and inspection accuracy!

The APT-2600FD-SL is a large model that maintains the basic performance of the APT-2600FD while expanding the compatible board size to W635×D610mm. Furthermore, by adding an optional split inspection function, it can inspect long boards up to W985×D610mm. It can accommodate components with a height of up to 60mm and board weights of up to 15kg, making it suitable for inspecting large and heavy boards such as those used in automotive, aerospace, medical devices, power supply boards, and probe cards. We accept evaluation tests at our demonstration rooms in Okayama headquarters and Tokyo branch, where you can bring your boards for testing. A complete flow of testing is possible, including the creation of inspection programs, testing with actual boards, and summarizing evaluation results. *For more details, please feel free to contact us.

• Other measuring instruments

We will create new value through the mutual complementarity of ICT and BST.

In-circuit testing with flying probe testers excels at inspecting the electrical characteristics of implemented electronic components in analog circuits. However, components that cannot be probed make electrical testing difficult, and functional testing of digital circuits is challenging. On the other hand, boundary scan testing allows for quick interconnection testing between LSI pins and on-board programming for FPGAs, but it can only test digital circuits around ICs that comply with the boundary scan standard, and it also requires dedicated fixtures for connections. At Takaya Corporation, we possess technology that uses flying probes instead of fixtures that connect 4 to 5 scan-compatible pins and measuring instruments required for boundary scan testing. This allows for boundary scan testing even when the counterpart of a boundary scan-compliant IC is a non-boundary scan-compliant IC or passive components (such as connectors), by enabling the flying probe to function as a virtual boundary scan cell. With a single flying probe tester, it is possible to conduct comprehensive testing of both digital and analog circuits, thereby significantly enhancing testing efficiency compared to before.

• Measurement and Inspection

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.