PERI products are used on construction sites around the world. (Denmark: Lighthouse 2.0)

Construction kit system for various works requiring self-elevating technology.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that serves as a self-climbing working scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of working scaffold and large formwork. ■ It uses hydraulic cylinders (rising 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer side and the hollow of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

• Systems Architecture

Easy lock-type (wedge-type) support system! Assembly is simple and safe. Furthermore, it also improves work efficiency on site.

"PERI UP/Rosette" is an easy-lock (wedge-type) support system. Assembly is simple and safe, and it also improves work efficiency on site. The main components are made up of modules, demonstrating high adaptability. The posts and horizontal members can be easily and quickly connected using a one-touch automatic locking device (Gravity Lock: patented technology in Germany!). Once the wedge is inserted into the joint, it can be securely locked with a hammer, ensuring it won't come loose. [You can view a reference video about Gravity Lock.] Applications include work stages, table forms, stair towers, and various other uses. [Features] - Easy and safe assembly - Improved work efficiency on site - High adaptability *For more details, please refer to the PDF document or feel free to contact us.

• Temporary Construction

Construction kit system for various projects requiring self-elevating technology.

The "PERI RCS Rail Climbing System" is a climbing system that serves as a formwork-integrated scaffold and self-climbing protection panel. There are two methods of climbing: one using a crane and the other using a movable hydraulic device instead of a crane, allowing for selection based on the construction requirements. Additionally, the climbing formwork-integrated scaffold comes standard with a carriage equipped with push-pull support. 【Product Features】 ■ Safe rail-guided procedure - The moving unit is always connected to the building by climbing shoes. ■ Flexible installation - Climbing shoes can be attached to walls and slab edges. ■ Variable assembly - The arrangement of 125mm holes in the climbing rail allows the platform to be adjusted to the height of each floor. *For more details, please refer to the PDF materials or feel free to contact us.

• Formwork material

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can detect vehicles in both directions with a single unit, accurately counting vehicles even during traffic jams or when vehicles pass each other. Additionally, this product can be used not only for vehicle counting but also as a sensor for departure warnings. Furthermore, by using a separately sold dedicated remote control, it is easy to reset the sensor alone, switch the counting direction, and change the patterns of the departure warning timer. 【Features】 ■ Angle adjustment up to ±5° ■ Can be installed in locations with high ceilings up to 4m ■ Detection area consists of 40 spots, allowing for extensive detection ■ The display LEDs are color-coded by direction, making operation confirmation easy.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Thank you very much for using our services. We have added a new service site. https://fusions.jp/fus-lp This is an introduction to the following services that will assist in sales and recruitment activities. * Sales... "Automatic sending of business negotiations to salespeople" * HR... "Elimination of miscellaneous tasks for the recruitment team" ⭕️ We are currently offering a free case study collection that you can implement in your own company with a 2-minute survey!

We have introduced our commercial aroma diffuser "Majesta Fragrance" to restaurants in Tokyo, welcoming customers with a gentle scent. We select fragrances that do not interfere with the aroma of the food, adding comfort and a sense of cleanliness. We have created an atmosphere that makes customers want to return. A free trial installation of Majesta Fragrance is also available. If you are interested in scent design, please feel free to contact us.