Aiming for Zero Work Accidents! How to Choose the Right Protective Gloves [Environmental Measures VOL.8]

This will focus on cut injuries and chemical damage, which are believed to be common not only in labor accidents but also in near misses, and will explain the characteristics of protective gloves and their proper usage.

Work that requires protective equipment occurs not only in manufacturing but also in various industries. Among the many types of protective gear, gloves in particular come in a wide variety, and there may be cases of improper use, reuse, or instances where protective gloves are not used despite the work being hazardous. However, neglecting such situations leads to the abandonment of [unsafe behaviors] and [unsafe conditions], as discussed in VOL.3, increasing the likelihood of workplace accidents. In 2023, "cuts and abrasions" ranked 5th (5.61%) in workplace accidents, while "contact with harmful substances" ranked 13th (0.45%). However, it is believed that there are potentially many more near misses that did not result in accidents. This time, we will focus on the more frequent incidents of cuts and chemical injuries, discussing the characteristics of different types of protective gloves and their proper usage.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

We will introduce the basics of risk assessment and safety protective equipment to ensure the safety of workers.

Since 1988, the number of casualties from workplace accidents has been decreasing, but since 2000, the decline has plateaued. In White Paper Vol. 2 [Winter Season Sees a Surge, Preventing Falls], we addressed the causes and preventive measures for falls, which are the most common workplace accidents. But why do workplace accidents occur in the first place? This time, we would like to focus on protecting the safety of workers and discuss the mechanisms behind workplace accidents and their prevention.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

The Ministry of Health, Labour and Welfare has established new regulations to prevent work-related accidents caused by chemical substances.

Starting from April 1, 2024, it will be mandatory for workplaces that handle chemical substances such as sodium hypochlorite (bleach), sodium hydroxide, and potassium hydroxide to require the wearing of protective eyewear. 【Details of the New Regulation】 ■ Workplace Structure 1. Workers handling chemical substances must wear appropriate protective gear, such as protective eyewear. 2. Establishment of a system for self-management. (1) Appoint a chemical substance manager. (2) Appoint a protective gear management officer. ■ Prevention of Direct Contact with Hazardous Chemical Substances When engaging workers in tasks that involve the manufacturing or handling of chemical substances that are skin or eye irritants, corrosive to the skin, or can be absorbed through the skin and cause health issues, it is necessary to require workers to use protective gear to prevent injuries, according to the harmfulness of the substances. For more details, please refer to the materials.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

Compatible with a wide range of solvents. Can be used as inner gloves.

【Features】 ■ Compatible with a wide range of solvents ■ Ambidextrous disposable type ■ Can be used as inner gloves ■ European standards EN420/374 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

A cutter with a safety design that automatically retracts the blade when cutting is finished. It's a precaution against accidents when cutting cardboard and packaging materials!

The safety cutter "Secupro 625" solves the problem of cutting thick materials like cardboard, where "it’s hard to cut without applying force," but "applying force increases the risk of cutting accidents." The "Secupro 625" is designed so that the blade does not extend unless it is held. 【Features】 ■ The blade automatically retracts into the body when it is away from the material being cut. ■ Durable aluminum body. ■ Left-handed compatible. * For more details, please refer to the PDF document or feel free to contact us. * A video demonstrating how the blade automatically retracts is available.

• Work tools

Thin chemical-resistant gloves made with three types of materials and featuring three characteristics!

"Try Lights" are gloves made from three types of materials: natural latex, neoprene, and nitrile, each possessing the three characteristics of "elasticity," "chemical resistance," and "durability." The surface is embossed, making them effective for tasks such as cleaning where items may easily drop. As thin gloves, they offer a wide range of chemical resistance and serve excellently as inner gloves for chemical work that requires thicker gloves. [Features] ■ Three types of materials providing "elasticity," "chemical resistance," and "durability" ■ Slip-resistant processing ■ Wide range of chemical resistance ■ No waterproof powder ■ Surface treated with chlorine for sterilization ■ FDA (U.S. Food and Drug Administration) certified *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Metal components such as outdoor lighting and road signs must possess the quality to function safely over a long period in harsh environments like rain, wind, and ultraviolet rays. The foundation of high quality consists of three key elements: 1. Precision design, advanced processing technology, and appropriate material selection 2. Strict process management and skilled workers 3. A quality control system equipped with inspection systems, measurement technology, and traceability. In cutting, dimensional accuracy and smooth cutting surfaces are particularly important; in bending, angle accuracy and uniformity of shape are crucial; and in welding, joint strength and beautiful beads are essential. By organically linking these aspects, metal products that combine durability and reliability are created. For more detailed explanations, visit the Kando Industrial website! You can find the continuation through the related links.

We will introduce the latest solutions that comprehensively support everything from daily business improvements to the establishment of systems in emergencies, centered around the dialysis business support system "Seraph" and the disaster information sharing system "DIEMAS." ■ Dialysis Business Support System "Seraph" Promotes digital transformation (DX) of operations with flexible scalability and intuitive operation tailored to the field. It smartly solves facility-specific issues through multi-manufacturer connectivity and integration with other systems. ■ Disaster Information Sharing System "DIEMAS" A cloud-based platform that supports the continuity of dialysis medical care. It accelerates the visualization of disaster situations and support matching, and was selected for the 2025 "Disaster Prevention Product Catalog." On the day of the event, we will present practical applications tailored to the challenges of your institution through live demonstrations. We sincerely look forward to your attendance. 【Event Overview】 Conference Name: 71st Annual Meeting of the Japanese Society for Dialysis Therapy Date: June 19 (Friday) to June 21 (Sunday), 2026 Venue: Kobe Portopia Hotel / Kobe International Conference Center / Kobe International Exhibition Hall / World Memorial Hall Official URL: https://site.convention.co.jp/71jsdt/

Before the full heat arrives, are the heatstroke prevention measures in manufacturing sites and warehouses sufficient? Every year, after June when temperatures rise sharply, the demand for spot air conditioners skyrockets. It is not uncommon to find oneself in a situation where, when they are finally needed, the response is "delivery date undecided" or "out of stock." I strongly recommend preparing early! ~Reasons why Suiden spot air conditioners are chosen~ Suiden's spot air conditioners, which boast overwhelming trust in commercial environments, are characterized by their "cooling capacity" and "durability." They provide pinpoint cooling to targeted areas: efficiently cooling large sites where overall air conditioning is difficult or workspaces prone to heat buildup. Tough design: they operate stably even in harsh environments. A rich lineup: from standard single-unit types to three-unit types that can cool multiple people simultaneously, and models with automatic oscillation functions, options are available to suit the scale of the site.

If you are considering "scent marketing (aroma branding)" for your store or office in Ibaraki Prefecture, please leave it to Majesta Fragrance! Our company helps enhance the added value of spaces through our rental service for commercial aroma diffusers. A free trial installation is also available. If you are interested in scent marketing, please feel free to contact us.