Aiming for Zero Workplace Accidents! How to Choose the Right Protective Gloves [Environmental Measures VOL.8]

This will focus on cut injuries and chemical damage, which are believed to be common not only in labor accidents but also in near misses, and will explain the characteristics of protective gloves and their proper usage.

Work that requires protective equipment occurs not only in manufacturing but also in various industries. Among the many types of protective gear, gloves in particular come in a wide variety, and there may be cases of improper use, reuse, or instances where protective gloves are not used despite the work being hazardous. However, neglecting such situations leads to the abandonment of [unsafe behaviors] and [unsafe conditions], as discussed in VOL.3, increasing the likelihood of workplace accidents. In 2023, "cuts and abrasions" ranked 5th (5.61%) in workplace accidents, while "contact with harmful substances" ranked 13th (0.45%). However, it is believed that there are potentially many more near misses that did not result in accidents. This time, we will focus on the more frequent incidents of cuts and chemical injuries, discussing the characteristics of different types of protective gloves and their proper usage.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

We will introduce the basics of risk assessment and safety protective equipment to ensure the safety of workers.

Since 1988, the number of casualties from workplace accidents has been decreasing, but since 2000, the decline has plateaued. In White Paper Vol. 2 [Winter Season Sees a Surge, Preventing Falls], we addressed the causes and preventive measures for falls, which are the most common workplace accidents. But why do workplace accidents occur in the first place? This time, we would like to focus on protecting the safety of workers and discuss the mechanisms behind workplace accidents and their prevention.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

The Ministry of Health, Labour and Welfare has established new regulations to prevent work-related accidents caused by chemical substances.

Starting from April 1, 2024, it will be mandatory for workplaces that handle chemical substances such as sodium hypochlorite (bleach), sodium hydroxide, and potassium hydroxide to require the wearing of protective eyewear. 【Details of the New Regulation】 ■ Workplace Structure 1. Workers handling chemical substances must wear appropriate protective gear, such as protective eyewear. 2. Establishment of a system for self-management. (1) Appoint a chemical substance manager. (2) Appoint a protective gear management officer. ■ Prevention of Direct Contact with Hazardous Chemical Substances When engaging workers in tasks that involve the manufacturing or handling of chemical substances that are skin or eye irritants, corrosive to the skin, or can be absorbed through the skin and cause health issues, it is necessary to require workers to use protective gear to prevent injuries, according to the harmfulness of the substances. For more details, please refer to the materials.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

Compatible with a wide range of solvents. Can be used as inner gloves.

【Features】 ■ Compatible with a wide range of solvents ■ Ambidextrous disposable type ■ Can be used as inner gloves ■ European standards EN420/374 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

A cutter with a safety design that automatically retracts the blade when cutting is finished. It's a precaution against accidents when cutting cardboard and packaging materials!

The safety cutter "Secupro 625" solves the problem of cutting thick materials like cardboard, where "it’s hard to cut without applying force," but "applying force increases the risk of cutting accidents." The "Secupro 625" is designed so that the blade does not extend unless it is held. 【Features】 ■ The blade automatically retracts into the body when it is away from the material being cut. ■ Durable aluminum body. ■ Left-handed compatible. * For more details, please refer to the PDF document or feel free to contact us. * A video demonstrating how the blade automatically retracts is available.

• Work tools

Thin chemical-resistant gloves made with three types of materials and featuring three characteristics!

"Try Lights" are gloves made from three types of materials: natural latex, neoprene, and nitrile, each possessing the three characteristics of "elasticity," "chemical resistance," and "durability." The surface is embossed, making them effective for tasks such as cleaning where items may easily drop. As thin gloves, they offer a wide range of chemical resistance and serve excellently as inner gloves for chemical work that requires thicker gloves. [Features] ■ Three types of materials providing "elasticity," "chemical resistance," and "durability" ■ Slip-resistant processing ■ Wide range of chemical resistance ■ No waterproof powder ■ Surface treated with chlorine for sterilization ■ FDA (U.S. Food and Drug Administration) certified *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Seven Corporation has begun research and development related to rust prevention, aiming to expand the functionality of the natural multifunctional aqueous solution "SEA'S 7." This research is being promoted as a collaborative study with the Industrial Technology Research Institute. In recent years, the manufacturing industry has been seeking technologies that balance environmental impact reduction and improved work safety, making rust prevention measures after cleaning a critical issue. This research includes corrosion evaluation using metal test pieces, measurement of weight changes, and durability tests in a circulating water environment, advancing the understanding of rust prevention mechanisms and performance evaluation. In the future, we aim to develop a next-generation SEA'S 7 that incorporates rust prevention functionality in addition to cleaning, disinfection, and deodorization, contributing to the efficiency of manufacturing processes and the reduction of environmental impact.

We are pleased to announce the launch of the "Vertical Aluminum Step Type F." The "Vertical Aluminum Step Type F" is a new type of aluminum ladder specifically designed for excavation sites, based on the existing "Vertical Aluminum Step." The vertical aluminum step is lightweight due to its aluminum construction, making it easy to transport and set up. Additionally, its modular design allows for flexible height combinations (with connecting parts of 0.7m, 1.0m, and 2.0m). The newly launched Type F retains the features of the previous model while providing even greater convenience. <Features of Type F> ■ The hook adjustment range of the fixed part has been expanded. It can be attached to structures ranging from 20mm to 200mm. ■ The length of the stand pipe can be adjusted. The stand pipe can be stored, making transportation and storage easier. <Release Date> January 5, 2026 <Specifications> - Standard set for Type F: 2.4m *Individual sales of the hanging fixed part and connecting parts are available. *Sales of the previous model (stand pipe fixed type) will also continue.

This time, we will explain the differences in roles between the "accounting system" and the "document management system," which are surprisingly not well known, as well as points that are often overlooked in legal compliance. ■ The difference between accounting systems and document management systems is their "scope of coverage." - Accounting System = Management of "money (numbers)" - Document Management System = Management of "evidence (documents)" ■ Documents that are often overlooked in accounting systems The accounting system primarily focuses on "accounting processes." - "Estimates" where no money movement occurs - "Delivery notes" and "purchase orders," which are intermediate points in transactions ⇒ There are cases where these are not saved or managed in the accounting system. This could be considered a deficiency under the Electronic Bookkeeping Act. ■ Supplementing the missing parts with an "independent system" While there are high-function ERP (Enterprise Resource Planning) systems that can manage everything from estimates to invoicing seamlessly, the reality is that the cost can be a significant barrier to implementation. Therefore, there is also the option of managing documents with an independent document management system like paperlogic. Paperlogic is currently offering a free trial. Please feel free to contact us.