Aiming for Zero Workplace Accidents! How to Choose the Right Protective Gloves [Environmental Measures VOL.8]

This will focus on cut injuries and chemical damage, which are believed to be common not only in labor accidents but also in near misses, and will explain the characteristics of protective gloves and their proper usage.

Work that requires protective equipment occurs not only in manufacturing but also in various industries. Among the many types of protective gear, gloves in particular come in a wide variety, and there may be cases of improper use, reuse, or instances where protective gloves are not used despite the work being hazardous. However, neglecting such situations leads to the abandonment of [unsafe behaviors] and [unsafe conditions], as discussed in VOL.3, increasing the likelihood of workplace accidents. In 2023, "cuts and abrasions" ranked 5th (5.61%) in workplace accidents, while "contact with harmful substances" ranked 13th (0.45%). However, it is believed that there are potentially many more near misses that did not result in accidents. This time, we will focus on the more frequent incidents of cuts and chemical injuries, discussing the characteristics of different types of protective gloves and their proper usage.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

We will introduce the basics of risk assessment and safety protective equipment to ensure the safety of workers.

Since 1988, the number of casualties from workplace accidents has been decreasing, but since 2000, the decline has plateaued. In White Paper Vol. 2 [Winter Season Sees a Surge, Preventing Falls], we addressed the causes and preventive measures for falls, which are the most common workplace accidents. But why do workplace accidents occur in the first place? This time, we would like to focus on protecting the safety of workers and discuss the mechanisms behind workplace accidents and their prevention.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

The Ministry of Health, Labour and Welfare has established new regulations to prevent work-related accidents caused by chemical substances.

Starting from April 1, 2024, it will be mandatory for workplaces that handle chemical substances such as sodium hypochlorite (bleach), sodium hydroxide, and potassium hydroxide to require the wearing of protective eyewear. 【Details of the New Regulation】 ■ Workplace Structure 1. Workers handling chemical substances must wear appropriate protective gear, such as protective eyewear. 2. Establishment of a system for self-management. (1) Appoint a chemical substance manager. (2) Appoint a protective gear management officer. ■ Prevention of Direct Contact with Hazardous Chemical Substances When engaging workers in tasks that involve the manufacturing or handling of chemical substances that are skin or eye irritants, corrosive to the skin, or can be absorbed through the skin and cause health issues, it is necessary to require workers to use protective gear to prevent injuries, according to the harmfulness of the substances. For more details, please refer to the materials.

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

Compatible with a wide range of solvents. Can be used as inner gloves.

【Features】 ■ Compatible with a wide range of solvents ■ Ambidextrous disposable type ■ Can be used as inner gloves ■ European standards EN420/374 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

A cutter with a safety design that automatically retracts the blade when cutting is finished. It's a precaution against accidents when cutting cardboard and packaging materials!

The safety cutter "Secupro 625" solves the problem of cutting thick materials like cardboard, where "it’s hard to cut without applying force," but "applying force increases the risk of cutting accidents." The "Secupro 625" is designed so that the blade does not extend unless it is held. 【Features】 ■ The blade automatically retracts into the body when it is away from the material being cut. ■ Durable aluminum body. ■ Left-handed compatible. * For more details, please refer to the PDF document or feel free to contact us. * A video demonstrating how the blade automatically retracts is available.

• Work tools

Thin chemical-resistant gloves made with three types of materials and featuring three characteristics!

"Try Lights" are gloves made from three types of materials: natural latex, neoprene, and nitrile, each possessing the three characteristics of "elasticity," "chemical resistance," and "durability." The surface is embossed, making them effective for tasks such as cleaning where items may easily drop. As thin gloves, they offer a wide range of chemical resistance and serve excellently as inner gloves for chemical work that requires thicker gloves. [Features] ■ Three types of materials providing "elasticity," "chemical resistance," and "durability" ■ Slip-resistant processing ■ Wide range of chemical resistance ■ No waterproof powder ■ Surface treated with chlorine for sterilization ■ FDA (U.S. Food and Drug Administration) certified *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

A truck berth is a space in a logistics warehouse where trucks can be parked to load and unload goods. By installing sensors in the truck berth to display the occupancy status, it is possible to quickly guide trucks to available spaces. Additionally, sharing the occupancy status with warehouse workers allows for a swift start to loading and unloading, improving overall productivity and reducing truck waiting times. 【Target Products】 - Occupancy detection sensor HM-UX2/UW2 (ceiling-mounted, ultrasonic type) ■ Benefits of Implementation Benefit 1: The HM-UX2 can be installed at high positions without height restrictions. Benefit 2: By setting the detection distance higher than a person's height, false detections caused by people are reduced. Benefit 3: The HM-UX2 is not affected by the floor surface, eliminating false detections caused by small stones or unevenness on the floor. Benefit 4: For locations with many parking spaces, the communication-type ultrasonic sensor HM-UW2 is recommended.

Based on practical experience in both support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On August 21, 2025 (Thursday), they published a page titled "Does 'Order' Affect Impressions?! 'Serial Position Effect'". When multiple pieces of information are presented in order, the middle information tends to be less memorable, while the 'first' and 'last' pieces of information are more likely to be retained in memory, known as the 'serial position effect'. The page explains the experimental content that proved this effect, the two theories that support it, examples of its occurrence in business contexts, and points to consider when utilizing it. (Page Overview: Excerpts) ■ What is the 'Serial Position Effect'? ■ Experiments that clarified the 'Serial Position Effect' ■ The two theories that explain the 'Serial Position Effect' ■ Examples of the 'Serial Position Effect' in business contexts ■ Cautions regarding the 'Serial Position Effect' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/serial-position-effect-2025-08/

Details of the FaceMe Security 8.3 Update < Revamped UX for Action & Alert Rule Settings > Previously, individual settings were required for each action even within the same rule. By completely overhauling the UI and UX, we have transformed the operation screen to allow for intuitive and efficient configuration. ▶ Key Update Points - Multiple actions (notifications, access control, VMS integration, etc.) can now be set within a single rule. - The settings screen has been consolidated into a single page, allowing for an overview and editing of the entire configuration at a glance. < Enhanced Integration Features with Face Terminal (Facial Recognition Terminal) > FaceMe Security integrates with the MSK Knoctoi series (Standard/Lite), enabling door opening and closing based on facial recognition results without the need for additional devices. This update allows for detailed configuration of door opening and closing rules based on location, time of day, and groups of individuals, enabling more flexible access management tailored to on-site operations. ▶ Expected Implementation Scenarios - All employees can enter the entrance, while only administrators can enter specific areas at night, etc.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.