A document summarizing the screw manufacturing technology of Daiichi Industry (forging, cutting, welding) is now available!

[Attention Engineers] The Basics of Screw Manufacturing Technology: "Forging Process." We are currently offering free technical materials on "Basic Knowledge of Forging Process," which explains the differences in the manufacturing of bolts and nuts.

Many "screw products" such as bolts and nuts are manufactured using "forging." "Forging" is a processing method that uses molds to shape metal materials by compressing them. It has many advantages, such as good yield, suitability for mass production, and increased strength due to work hardening. Although both are "screw products," bolts and nuts differ in materials, manufacturing processes, and manufacturing equipment. At Daiichi Kogyo, as a specialized group that manufactures both bolts and nuts, we have accumulated production and manufacturing technologies that correspond to each of these differences. We also utilize FEM analysis to conduct forging simulations, which are applied in process design and mold design. The reason we can manufacture both bolts and nuts can be found in the link below: "Production and Manufacturing Technology of the Specialized Group." A specialized group that manufactures both bolts and nuts has compiled "Basic Knowledge of Forging." We provide a clear explanation of the actual processing steps with accompanying photographs. Improvement examples utilizing FEM analysis are also included. Please download and take a look.

• others

[Attention Engineers] Screw manufacturing is not just about forging. There is also cutting and welding. We offer a free [technical document] that provides fundamental knowledge of each technique!

Daiichi Kogyo is a specialized group that develops and manufactures fastening components, including bolts and nuts. 【What a specialized group can do】 While "forging" is the common method for screw manufacturing, "cutting" is also an important processing technique for screw production when complex shapes or additional processes like drilling are required. Daiichi Kogyo possesses the manufacturing know-how necessary for "forging," "cutting," and "welding" in screw production. We can perform "composite processing" that combines these techniques. Forging + Cutting + Welding ⇒ Composite products With the accumulation of each processing technique, we can set up processes that leverage the characteristics of each method. 【Manufacturing Example】Production of parts with strict precision requirements. ● When manufactured using only "forging," the load on the mold increases, raising concerns about mold lifespan and quality deterioration. ↓ ● By switching from "forging" to "cutting" for manufacturing, we can reduce the load on the mold and lower forging costs, achieving quality improvement as well. For more details, please visit the following 【Daiichi Kogyo Co., Ltd. Fastener Division Fastening Components Site】. We are currently offering free technical materials that provide basic knowledge of screw manufacturing techniques, including "cutting and welding." Please download and take a look.

• others

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

On December 23rd (Tuesday), the Japan Meteorological Agency announced the three-month forecast for January to March. During this period, there will be times when the extension of the Siberian high pressure is weak to the northeast and strong to the southeast, which may lead to the influence of cold air from the west. As a result, temperatures nationwide are expected to be nearly average from January to February. For more details, please visit our company website.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8