We have published the catalog for the 'Low Voltage Smart Electric Meter B Route Compatible Controller'.

Power consumption data can be obtained via the "B route" information communication method using Wi-SUN communication equipped in the low-voltage smart electric power meter.

"ECOGate-WS" is a controller for low-voltage smart electric meters. It has the capability to acquire electric power data via the "B route" information communication method using Wi-SUN communication equipped in low-voltage smart electric meters. It has a Modbus-TCP server function, allowing the acquired various electric power data to be retrieved using the Modbus-TCP protocol.

• Monitoring and Control Equipment
• Power and Energy Equipment
• Information and communication equipment and infrastructure

A system for visualizing electricity usage based on the revised Energy Conservation Law and contributing to CO2 reduction for preventing global warming through solar power and renewable energy measurement.

Digital information such as electricity consumption from high-voltage smart meters used in factories and large-scale facilities is collected in real-time via the B route and sent to a cloud server. By utilizing application software on the server side, we will establish an energy management system that visualizes electricity consumption and monitors demand. Overview and Features ■ Collects electricity data and utilizes it on a cloud IoT platform ■ Supports data collection from high-voltage smart meters compliant with the ECHONET Lite standard ■ Achieves high security and easy integration with the IoT platform by using monitoring and control protocols

• Other power generation
• Management System
• Power and Energy Equipment

Acquisition of power consumption data using the IPv6-based "B route" communication method equipped in high-pressure smart meters.

The "LXG-600" is an EMS controller for high-voltage smart meters. It has the capability to acquire power consumption data using the IPv6-based "B Route" information communication method equipped in high-voltage smart meters. It converts the acquired ECHONET Lite format data into the receiving protocol/data format for cloud servers and has the function to regularly transmit this data via LTE wireless communication carrier networks. The transmission method to the cloud server can also be customized according to the customer's needs. Main features: ■ EMS controller compatible with high-voltage smart power meters (B Route) ■ Compliant with ECHONET Lite standard and ECHONET Lite AIF standard ■ Data transmission of various measurement values from high-voltage smart power meters via LTE

• Monitoring and Control Equipment
• Power and Energy Equipment
• Information and communication equipment and infrastructure

O&M of the equipment is carried out through remote monitoring and remote control using a cloud-based center.

By collecting the operational status data of equipment monitored at each site using dedicated data collection devices for sensors, measuring instruments, and contact monitoring devices, and converting it on the cloud into user-friendly communication protocols and data formats, it becomes easier to create application software tailored to each user's needs.

• Monitoring and Control Equipment
• Facility Management System
• Other security systems

A serial transfer service that enables control of remote RS-232C devices by sending an email to a specified email address.

"iND MIST2" is a service that converts data from terminal devices such as RS-232C equipment into TCP/IP using our LTE-compatible communication terminal, and sends it to our data center, where it is then emailed via a dedicated email address for the terminal. By connecting our "iND MIST2 compatible products" to RS-232C devices, customers can receive data from RS-232C devices as emails on mobile devices such as cell phones and smartphones, or on email software on their office computers.

• Monitoring and Control Equipment
• Security cameras and surveillance systems

NTT Docomo communication module (UM05-SS) built-in IoT adapter

The "F2L Assist-SS-A" is an LTE-compatible adapter equipped with an RS-232C controller that incorporates NTT Docomo's LTE communication module UM05-SS. It can be used with a flat-rate plan, allowing for a fixed monthly fee. With its RS-232C protocol conversion function, it can be used for a wide range of applications, such as switching from FOMA/PHS to LTE.

• Monitoring and Control Equipment
• Security cameras and surveillance systems
• Facility Management System

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI