【Product News】Construction Concrete Sensor 'PERI ISC' optimizes the concrete pouring process at construction sites, contributing to time savings and cost reduction!

"PERI ISC" optimizes the concrete pouring process at construction sites, contributing to time savings and cost reduction!

<NETIS Registration Number: CB-230029-A> PERI is launching a digital solution that optimizes the concrete pouring process at construction sites, contributing to time savings and cost reduction. 'PERI ISC' (PERI InSite Construction) is a concrete sensor product for construction. This product consists of measuring devices (main Hub and child Nodes), sensors, and a web cloud service that handles the collected data. The installable sensors include temperature sensors, pressure sensors (for lateral pressure measurement), and filling/compaction detection sensors. (In the future, a water-cement ratio sensor may also be available.) By optimizing the pouring work and the operating time of the formwork based on the information collected from various sensors installed within the concrete formwork, it is possible to carry out the demolding process earlier and reduce the amount of necessary formwork materials, leading to labor savings and time and cost reductions at construction sites. Additionally, the web cloud service allows for monitoring and analyzing data without being constrained by time or location. The web-based tools can be accessed from various devices.

• Ready-mix concrete

Exhibition of system formwork born in Germany! What is system formwork? I want to see the actual system formwork! Please feel free to contact us for more information!

At Perry Japan, we have a stockyard and product exhibition area. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. * What kind of company is Perry? * What is system formwork? * How is system formwork used? * I know about system formwork, but I've never used it. * I want to see the actual product before purchasing or renting! * And more. Please come and see our products at the Ibaraki Stockyard. For inquiries about tours, study sessions, or product seminars, feel free to contact us.

• Systems Architecture

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI