Added the 'Ultraviolet Band Pass Filter, Substrate: Itsuki Seiko Glass Co., IHU150' to the artisan coating.

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I want to block other wavelengths of light as they become noise, so I would like to widen the stop band. - Since there is a range of incident angles, can this be taken into account? - The shape is special, but can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Security cameras and surveillance systems
• Distance measuring device/length measuring device
• Automated guided vehicles (AGV, RGV)

It is an optical filter that cuts ultraviolet and infrared light while having a high transmittance in the visible light range.

A UV-IR cut filter is a filter that cuts light in the ultraviolet and infrared regions while having a high transmission rate in the visible light region. In other words, it is an optical filter that simultaneously realizes the properties of both a UV cut filter and an IR cut filter. By placing it in front of CMOS sensors or CCD sensors, it serves multiple roles, such as cutting out noise-inducing light, providing heat protection for various light sources, and preventing degradation of LCD components due to ultraviolet light. It is an excellent optical filter and optical thin film with multiple functions. Are you facing any of these issues? - Is it possible to cut both ultraviolet and near-infrared light? - Can a filter be made that allows visible light to pass while blocking IR and UV wavelengths? - I want to reduce noise light and increase the sensitivity of the sensor. Can I consult with you? - Is it possible to custom adjust the wavelength range that I want to transmit? - Is processing to chip size possible?

• Home Security
• lamp
• Mobile phones and smartphones

It is a filter that efficiently cuts (reflects) short-wavelength UV (ultraviolet) light while allowing visible light to pass through.

A UV cut filter (ultraviolet cut filter) is a filter that cuts ultraviolet (UV) light while allowing visible light to pass through. In digital cameras, it is used to reduce chromatic aberration, and in liquid crystal projectors, it helps prevent the degradation of liquid crystals and other optical components caused by the light from lamps (such as high-pressure mercury lamps) by cutting unnecessary ultraviolet light. Are you facing any of these issues? ◆ Is it possible to cut only the wavelength of ultraviolet light? ◆ Can a UV cut filter for projectors be coated? ◆ I would like to consult about the degradation of optical components. ◆ I would like to discuss filters that minimize the impact on the human body. ◆ Is it possible to custom adjust the wavelength range that I want to transmit?

• LED light source/module
• Non-destructive testing
• Other measuring instruments

We would like to inform you that, in order to further strengthen and enhance our sales and service operations, there will be changes to our Nagoya Sales Office as of April 1st, as detailed below. ■ Relocation of Nagoya Sales Office 【New Address】 〒460-0003 6th Floor, Sando Building, 1-7-27 Nishiki, Naka Ward, Nagoya City, Aichi Prefecture TEL: 052-212-6520 / FAX: 052-212-6521 *Please note that the TEL and FAX numbers will also change. Taking this opportunity, all of our staff will continue to make even greater efforts. Please feel free to contact us.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

iPick Co., Ltd., a partition manufacturer, will explain the definition of non-combustible materials under the Building Standards Act and their importance in office interiors. Fire-resistant materials are classified into three categories: non-combustible, quasi-non-combustible, and flame-retardant, based on safety during a fire. At iPick, we handle aluminum partitions that have received non-combustible certification, demonstrating high fire resistance, which is required by "interior restrictions" depending on the size and use of the building. Selecting appropriate materials is crucial not only for protecting the lives of employees but also from the perspective of asset protection and business continuity planning (BCP). We propose the creation of safe spaces that balance compliance with regulations and design. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ For the design and construction of interior partitions from offices to toilet booths, leave it to iPick, the partition specialist manufacturer! "We are accepting reservations for live office and showroom tours." 6F NMF Kanda Iwamotocho Building, 3-8-16 Iwamotocho, Chiyoda-ku, Tokyo For inquiries, feel free to contact our toll-free number 0120-020-720 (Weekdays 10:00 AM to 5:00 PM)!

JECA FAIR 2026 will be exhibiting at the 74th Electrical Installation Industry Exhibition. Dates: May 27, 28, 29 Venue: Tokyo Big Sight, Halls 1, 2, 3, and 8 We look forward to your visit.

The JRE Disaster Assessment Support System Gragram, jointly developed by Hakusan Industrial Co., Ltd. (Headquarters: Fuchu City, Tokyo, President: Minoru Yoshida https://www.hakusan.co.jp/) and JR East Japan Architectural Design Co., Ltd. (Headquarters: Shibuya City, Tokyo, President: Yoshihiko Ito https://www.jred.co.jp/), has been implemented in all buildings of the TAKANAWA GATEWAY CITY, which will have its grand opening on March 28, 2026, and OIMACHI TRACKS, which will open to the public. For more details, please refer to the link below.