【TTL】"Until FPC is completed..." ● The manufacturing process of Taiyo Technorex has been documented.

【Basic Knowledge - PowerPoint Version Download Available!】The standard manufacturing process of Taiyo Kogyo, which has focused on small quantities and a wide variety, has been compiled into a document!

This document introduces the manufacturing process of FPC (Flexible Printed Circuit) conducted by Taiyo Kogyo Co., Ltd. A PowerPoint version has been added! * The PowerPoint version can be downloaded from 'Sample Software'. How are flexible printed circuit boards made? This material is for those who want to learn about FPC. It explains the manufacturing process after the design of standard specification FPC. [Contents (excerpt)] ■ Exposure ■ Through-hole drilling ■ Copper plating ■ Dry film lamination ■ Exposure * The download will provide a PDF version. * The PowerPoint version can be downloaded from 'Sample Software'. [The urban development and medical food technology site will only provide a PDF version] #CircuitBoard #FlexiblePrintedCircuitBoard #FlexibleCircuitBoard #FPC #Flex #BasicKnowledge

• Piping and electrical wiring materials
• others

Ultra-fine lines, high density, and high-definition flexible printed circuit boards have made it possible to form ultra-fine circuits through the fusion of MSAP technology and via filling techniques!

The miniaturization and high functionality of electronic devices are advancing, and along with this, there is a demand for finer circuit formation. One method for forming wiring by etching copper foil (subtractive method) and a high-resolution circuit formation method is to form wiring by plating on ultra-thin copper foil (semi-additive method). The method we are introducing this time is one of the semi-additive methods, called "MSAP (Modified Semi Additive Process)." By using the MSAP method, it has become possible to achieve ultra-fine lines and high-density pattern formation, which is difficult with the subtractive method. Additionally, by combining it with the "via filling technology," which fills through-hole holes with copper plating, it becomes possible to create wiring on the through-holes, further increasing wiring density. **Features of the MSAP Method:** - Circuit formation through plating deposition enables high-precision fine wiring. - Excellent rectangularity of wiring cross-section contributes to reduced transmission loss. - Superior for high-frequency substrates/IC mounting. By merging these two processing technologies, we have realized "ultra-fine high-density FPC." #FlexibleSubstrate #Substrate #HighResolutionSubstrate #Flex #FlexiblePrintedCircuitBoard

• others

Supports low transmission loss and impedance matching! There are various applications such as mobile electronic devices and IoT devices.

"High Frequency Compatible FPC" and "High Frequency Compatible Flexible Printed Circuit Board" are products designed to support low transmission loss and impedance matching. Specifications include coplanar lines, microstrip lines, and strip lines. They can be used for various applications. [Examples of Applications] ■ Mobile electronic devices such as smartphones ■ Optical communication modules ■ IoT devices ■ Video equipment (4K/8K) ■ Other alternatives to coaxial cables *For more details, please refer to the PDF document or feel free to contact us. #Flexible #FPC #FlexibleCircuitBoard #FlexiblePrintedCircuitBoard #CircuitBoard #PrintedCircuitBoard #HighFrequency #Impedance #ShortDeliveryTime #MassProduction

• others

We will manufacture multi-layer flexible substrates (3 to 6 layers) entirely from polyimide. Please look forward to our quick delivery response! (Multi-layer boards, FPC)

Taiyo Industry supports everything from prototyping to mass production. - Achieves high density through pad-on-bead technology. - Supports 400μm pitch BGA. - Improved design flexibility with high-density multilayer structures. - Also supports impedance management. For more detailed information, please feel free to contact our representative. #Flex #FPC #FlexibleSubstrate #FlexiblePrintedCircuitBoard #CircuitBoard #PrintedCircuitBoard #HighFrequency #Impedance

• others

Transparent flexible printed circuit boards contribute to improved design with excellent transparency! The fine pattern makes the wiring less noticeable.

- Use of polyimide with excellent heat resistance and flame retardancy. ⇒ [Compatible with reflow mounting] - For display devices such as digital signage, as well as medical devices and transparent film antennas! - We also accommodate small quantities and a variety of prototypes. For more detailed information, please contact us. #Transparent #Transparent FPC #Transparent Flex

• others

A must-see for those struggling with cost reduction and space-saving for flexible printed circuit boards (flexible substrates)! We can provide optimal proposals tailored to your needs!

This document summarizes the types and applications of high-performance FPCs. High-performance FPCs are capable of solving various challenges such as cost reduction and space-saving. In this document, we introduce the characteristics and application examples of special bumps, long and ultra-thin FPCs, and highly flexible FPCs. More detailed information is also available, so please take a moment to read through it. 【Contents】 ■ Types of high-performance FPCs ■ Features ■ Application examples *For more details, please refer to the PDF document or feel free to contact us. #ShortLeadTime #MassProduction #Flex #FPC #FlexibleCircuitBoard #FlexiblePrintedCircuitBoard #CircuitBoard #PrintedCircuitBoard #Special #UltraThin #Flexible

• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.