[Notice of Exhibition Participation] We will be exhibiting at the Total Solution Exhibition for Electronic Devices 2024 / JISSO PROTEC 2024 Assembly Process Technology Exhibition.

This is a flagship model that arranges probe heads above and below, enabling simultaneous in-circuit testing of both sides of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in standard. By using the upper and lower flying probes simultaneously, a combination inspection of up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Measurement and Inspection

Programming for FPGAs and special performance tests such as BST can be handled with a flying probe tester.

This is an option that equips the underside operating axis of the APT-1600FD series with a dedicated fixture lifting mechanism. It allows for special inspections connected to external devices, such as Boundary Scan Testing (BST), as well as writing to and reading logs from ICs, to be performed in parallel with in-circuit testing. *Please refer to the YouTube video for an image of the operation.

• Measurement and Inspection

The Takaya APT series is a board inspection device capable of industry-leading ultra-high-speed in-circuit testing.

One method for efficiently mass-producing products is the "line production method," which arranges machinery in order of the production process. This method excels in the productivity of single products and is adopted in many manufacturing sites. The incorporation of inspection processes into this line production method is referred to as "inline inspection." Takaya's flying probe testers have models that can accommodate this "inline inspection" by automatically transporting circuit boards on a conveyor. By collaborating with loaders, unloaders, and inverters through SMEMA, it enables automated and unmanned inspection even for large quantities of circuit boards. Additionally, by using it in conjunction with other companies' 3D AOI (automated optical inspection machines), the flying probe tester can detect issues such as microbridges that cannot be identified through visual inspection alone. This approach leverages the strengths of each system, resulting in the elimination of false positives, improved inspection capabilities, and increased speed. If you are facing challenges with full electrical inspection (ICT) of mass-produced circuit boards, please consider Takaya's APT series, which allows for easy line switching without the need for fixtures.

• Measurement and Inspection

Exhibiting at Nepcon 2024 from January 24! Achieving interoperability between industrial equipment and MES systems!

OPC UA (OPC Unified Architecture) is an open international standard developed for safe and reliable data exchange in industries such as industrial automation. It was announced by the OPC Foundation in 2008 and later standardized as IEC62541. It enables secure and highly reliable data exchange across various types of devices, operating systems, and manufacturers, making it recommended as the standard communication for Industrie 4.0 and increasingly adopted worldwide. Additionally, it is aligned with the international standard for PLCs, IEC61131-3, providing the advantage of high reliability in exchanging information from the manufacturing site with higher-level monitoring control systems and Manufacturing Execution Systems (MES). In response to this trend, Takaya has prepared an option to equip the APT series of flying probe testers with an OPC UA server. We are working to promote the adoption of industrial IoT standards that bridge FA equipment and IT.

• Measurement and Inspection

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.

Rentama Co., Ltd. will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)" held at Makuhari Messe. A wide range of cutting-edge products, technologies, and services from the evolving industries of construction machinery, heavy equipment, attachments, construction DX, and i-Construction will be gathered in one place. This is one of the largest exhibitions in Japan for professionals in the construction and surveying industries to gather for business discussions, advanced information gathering, and problem-solving. This is a valuable opportunity to see KEMROC products up close. We understand you may be busy, but we invite you to stop by our booth. We look forward to meeting everyone.