Introduction of the new industrial high-speed pressure controller CPC3050.

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

Accuracy: The CPC30500 with FS±0.02% can handle high-speed control with a response time of 3 to 4 seconds across a wide pressure range of -100 kPa to 21 MPa. It can accommodate up to two built-in sensors, and by incorporating an optional atmospheric pressure sensor, it allows for switching between atmospheric pressure display and absolute/gauge pressure display. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Compound Pressure: -100 kPa...1 MPa to -100 kPa...21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LC Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. [Accuracy: FS±0.02%] High-Speed Pressure Controller CPC3050

• Air compressors, blowers and pumps

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

Accuracy: The CPC3050 pressure calibrator, with an accuracy of FS±0.02%, supports high-speed control within 3 to 4 seconds and accommodates a wide pressure range from -100 kPa to 21 MPa. It can house up to two sensors, and when an atmospheric pressure sensor is included, it can switch between displaying atmospheric pressure and absolute/gauge pressure. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Compound Pressure: -100 kPa...1 MPa to -100 kPa ... 21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LC Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. [Accuracy: FS±0.02%] High-speed control pressure calibrator CPC3050

• Air compressors, blowers and pumps

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

This is a high-speed control pressure calibrator with a control speed of 3 to 4 seconds. It supports a wide pressure range from -100 kPa to 21 MPa and can accommodate up to two built-in sensors. By incorporating an optional atmospheric pressure sensor, it can not only display atmospheric pressure but also switch between absolute pressure and gauge pressure displays. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Compound Pressure: -100 kPa...1 MPa to -100 kPa...21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Set Units: 38 units and two user-defined units - 7.0” Color LCD Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. [Control Speed: 3 to 4 seconds] High-speed control pressure calibrator CPC3050

• Air compressors, blowers and pumps

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

The CPC30500 not only supports a wide pressure range from -100 kPa to 21 MPa but also enables high-speed control within 3 to 4 seconds. It can accommodate up to 2 built-in sensors, and an atmospheric pressure sensor can also be optionally integrated. It supports not only the switching between absolute pressure and gauge pressure displays but also the display of atmospheric pressure. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Combined Pressure: -100 kPa...1 MPa to -100 kPa...21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LCD Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. [Control Speed: 3–4 seconds] High-speed control pressure controller CPC3050

• Air compressors, blowers and pumps

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

The CPC3050 allows for measurements of up to 21 MPa and can perform control speeds of 3 to 4 seconds. It can accommodate up to two built-in sensors and also has the option to include an atmospheric pressure sensor. It can switch between displaying atmospheric pressure and absolute/gauge pressure. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Combined Pressure: -100 kPa...1 MPa to -100 kPa to 21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LCD Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. 【Supports up to 21 MPa】High-speed Control Pressure Controller CPC3050

• Air compressors, blowers and pumps

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

The CPC3050 pressure calibrator, which supports high-speed control with a control speed of 3 to 4 seconds, can measure pressures up to 21 MPa. It can accommodate up to two built-in sensors, and when an atmospheric pressure sensor is included, it allows for switching between atmospheric pressure, absolute pressure, and gauge pressure displays. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Differential Pressure: -100 kPa...1 MPa to -100 kPa...21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Set Units: 38 units and two user-defined units - 7.0” Color LCD Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. 【Supports up to 21 MPa】High-speed control pressure calibrator CPC3050

• Air compressors, blowers and pumps

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

The CPC3050 has a control stability of 0.025% and supports high-speed control with a response time of 3 to 4 seconds over a wide pressure range of -100 kPa to 21 MPa. It can accommodate up to 2 built-in sensors, and an atmospheric pressure sensor is available as an option. The display can switch between absolute pressure, gauge pressure, and atmospheric pressure. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Compound Pressure: -100 kPa...1 MPa to -100 kPa...21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LCD Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interfaces: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. 【Control Stability: 0.025%】High-Speed Control Pressure Calibrator CPC3050

• Air compressors, blowers and pumps

This is a pressure controller that supports high-speed control with a control speed of 3 to 4 seconds, a range of -100 kPa to 21 MPa, and an accuracy of 0.02%.

The CPC30500, which supports high-speed control, can operate at a wide pressure range of -100 kPa to 21 MPa with a control speed of 3 to 4 seconds. It can accommodate up to two built-in sensors, and when an optional atmospheric pressure sensor is included, it can not only display atmospheric pressure but also switch between absolute pressure and gauge pressure displays. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Compound Pressure: -100 kPa...1 MPa to -100 kPa ... 21 MPa - Absolute Pressure: 0...100 kPa to 10.1 MPa - Accuracy: 0.02% of reading - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LC Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet.

• Air compressors, blowers and pumps

Range: -100 kPa to 21 MPa, accuracy: 0.02%, this is a cost-effective pressure controller.

Accuracy: The CPC4000 pressure controller/calibrator with an accuracy of FS±0.02% supports a pressure range of -100 kPa to 21 MPa. It can accommodate up to two built-in sensors. By incorporating an optional atmospheric pressure sensor, it allows for switching between atmospheric pressure, absolute pressure, and gauge pressure displays. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Compound Pressure: -100 kPa...1 MPa to -100 kPa...21 MPa - Absolute Pressure: 0...100 kPa to 21.1 MPa - Accuracy: FS±0.02% or 0IS-50 - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LCD Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interfaces: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. [Accuracy: FS±0.02%] Pressure Controller CPC4000

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 21 MPa, accuracy: 0.01% FS, or modular pressure controller IS-50.

Maximum accuracy: The CPC6050 with 0.01% accuracy can accommodate up to two built-in regulators and sensors. With the built-in atmospheric pressure sensor, it is possible to switch between absolute pressure, gauge pressure, and atmospheric pressure display. It has a proven track record in many applications such as calibration and production processes. <Specifications> - Pressure range: -100kPa to 21MPa - Gauge pressure: 0...21kPa to 21MPa - Differential pressure: -1.2kPa...1.2kPa to -100kPa to 21MPa - Absolute pressure: 50kPa to 21.1MPa - Accuracy: FS±0.01% or 0IS-50 - Calibration interval: 365 days - Set units: 38 units and two user-defined units - 8.9” color LCD display, touch screen - Resolution: 4...6 digits - Supply pressure media: Air or N2 - Power supply: AC 100–110V / 200–240V, 50/60Hz - Power consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. 【Accuracy: 0.01%】Pressure Controller CPC6050

• Air compressors, blowers and pumps

Range: -100 kPa to 21 MPa, accuracy: 0.02%, this is a cost-effective pressure controller.

The CPC4000 is available in a wide pressure range of -100kPa to 21MPa. It can accommodate up to two built-in sensors, and by incorporating an optional atmospheric pressure sensor, it allows for not only atmospheric pressure display but also switching between absolute pressure and gauge pressure displays. <Specifications> - Pressure Range: 0.02% FS or IS-50 - Gauge Pressure: 0...35kPa to 21MPa - Compound Pressure: -100kPa...1MPa to -100kPa...21MPa - Absolute Pressure: 0...100kPa to 21.1MPa - Accuracy: FS±0.02% or 0IS-50 - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 7.0” Color LC Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet.

• Air compressors, blowers and pumps

Range: -100 kPa to 21 MPa, accuracy: 0.02%, this is a cost-effective pressure controller.

The CPC4000 supports a wide pressure range from -100 kPa to 21 MPa, with high accuracy of FS±0.02%, making it a highly precise pressure calibrator. You can choose from one or two built-in sensors. It features an optional built-in atmospheric pressure sensor, allowing for switching between absolute pressure, gauge pressure, and atmospheric pressure displays. <Specifications> - Gauge Pressure: 0...35 kPa to 21 MPa - Compound Pressure: -100 kPa...1 MPa to -100 kPa ... 21 MPa - Absolute Pressure: 0...100 kPa to 21.1 MPa - Accuracy: FS±0.02% or 0IS-50 - Calibration Interval: 365 days - Set Units: 38 units and two user-defined units - 7.0” Color LCD Display, Touchscreen - Resolution: 4 to 6 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100–110V / 200–240V, 50/60Hz - Power Consumption: 120 VA - Interface: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. [Accuracy: FS±0.02%] Pressure Calibrator CPC4000

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 21 MPa, accuracy: 0.01% FS, or IS-50 modular pressure controller.

The CPC6050 is a pressure calibrator and controller with a pressure range of -100 kPa to 21 MPa and an accuracy of 0.01%. It also boasts high stability and is used in many applications such as calibration and production processes. <Specifications> - Pressure range: -100 kPa to 21 MPa - Gauge pressure: 0...21 kPa to 21 MPa - Differential pressure: -1.2 kPa...1.2 kPa to -100 kPa to 21 MPa - Absolute pressure: 50 kPa to 21.1 MPa - Accuracy: FS±0.01% or 0IS-50 - Calibration interval: 365 days - Setting units: 38 units and two user-defined units - 8.9” color LC display, touch screen - Resolution: 4...6 digits - Supply pressure medium: Air or N2 - Power supply: AC 100–110V / 200–240V, 50/60Hz - Power consumption: 120 VA - Interfaces: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet.

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 21 MPa, accuracy: 0.01% FS, or modular pressure controller IS-50.

The CPC6050 is a pressure calibrator/controller with an accuracy of 0.01%. It supports a maximum range of up to 21 MPa. Up to two regulators and sensors can be built-in. It offers many applications such as calibration and production processes. <Specifications> - Pressure range: -100 kPa to 21 MPa - Gauge pressure: 0...21 kPa to 21 MPa - Differential pressure: -1.2 kPa...1.2 kPa to -100 kPa to 21 MPa - Absolute pressure: 50 kPa to 21.1 MPa - Accuracy: FS±0.01% or 0IS-50 - Calibration interval: 365 days - Setting units: 38 units and two user-defined units - 8.9” color LCD display, touch screen - Resolution: 4 to 6 digits - Supply pressure medium: Air or N2 - Power supply: AC 100–110V / 200–240V, 50/60Hz - Power consumption: 120 VA - Interfaces: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. 【Accuracy: 0.01%】Pressure calibrator CPC6050

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 21 MPa, accuracy: 0.01% FS, or modular pressure controller IS-50.

The CPC6050 can accommodate up to two built-in regulators, each of which can be controlled independently. Each channel can house up to two sensors, and by optionally incorporating an atmospheric pressure sensor, it allows for switching between absolute pressure and gauge pressure displays. It offers many applications such as calibration and production processes. <Specifications> - Pressure range: -100kPa to 21MPa - Gauge pressure: 0...21kPa to 21MPa - Differential pressure: -1.2kPa...1.2kPa to -100kPa to 21MPa - Absolute pressure: 50kPa to 21.1MPa - Accuracy: FS±0.01% or 0IS-50 - Calibration interval: 365 days - Setting units: 38 units and two user-defined units - 8.9” color LC display, touch screen - Resolution: 4...6 digits - Supply pressure medium: Air or N2 - Power supply: AC 100–110V / 200–240V, 50/60Hz - Power consumption: 120 VA - Interfaces: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet.

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 40 MPa, maximum accuracy: 0.008%. This is a high-pressure compatible pressure controller IS-33.

The CPC8000 is a high-pressure calibration device and controller for pressure sensors with a maximum accuracy of 0.008% IS-33. It is designed to automate testing and manufacturing lines for pressure sensors and is our high-end model. With up to three removable transducers and one standard barometer, it achieves high-precision measurements across a wide range of pressure. The transducers and barometer are removable. <Product Specifications> - Pressure Range: -100 kPa to 40 MPa - Maximum Accuracy: 0.008% IS-33 - Control Stability: <0.002% FS - Uncertainty: 0.008% - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 9” Color LC Display, Touchscreen - Resolution: 1 to 10 PPM - Supply Pressure Media: Air or N2 - Power Supply: AC 100 ... 110V / 200 ... 240V, 50/60Hz - Power Consumption: 120 VA For more details, please refer to the product data sheet. <Accuracy: 0.008%> High-Precision Pressure Controller CPC8000

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 40 MPa, maximum accuracy: 0.008%. This is a high-pressure compatible pressure controller for IS-33.

The CPC8000, a high-precision pressure calibrator with an accuracy of 0.008%, achieves precise readings across a pressure range of -100 kPa to 40 MPa. It is designed to automate the testing and manufacturing of pressure sensors and is one of the top-class pressure calibrators/controllers from WIKA. It features up to three removable transducers and one standard barometer, both of which are detachable. <Product Specifications> - Pressure Range: -100 kPa to 40 MPa - Maximum Accuracy: 0.008% IS-33 - Control Stability: <0.002% FS - Uncertainty: 0.008% - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 9” Color LC Display, Touchscreen - Resolution: 1 to 10 PPM - Supply Pressure Medium: Air or N2 - Power Supply: AC 100 ... 110V / 200 ... 240V, 50/60Hz - Power Consumption: 120 VA For more details, please refer to the product data sheet.

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 40 MPa, maximum accuracy: 0.008%. This is a high-pressure compatible pressure controller of IS-33.

The CPC 8000 is our top-class pressure calibrator/controller designed to automate the testing and manufacturing of various pressure sensors. It achieves precise readings across a wide pressure range with up to three removable transducers and one standard barometer. The transducers and barometer are removable and can be calibrated using optional calibration accessories. With software functionality, it can be replaced with pressure controllers from other manufacturers. <Product Specifications> - Pressure Range: -100 kPa to 40 MPa - Maximum Accuracy: 0.008% IS-33 - Control Stability: <0.002% FS - Uncertainty: 0.008% - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 9” Color LCD Display, Touchscreen - Resolution: 1 to 10 PPM - Supply Pressure Media: Air or N2 - Power Supply: AC 100 ... 110V / 200 ... 240V, 50/60Hz - Power Consumption: 120 VA For more details, please refer to the product data sheet.

• Air compressors, blowers and pumps

Pressure range: 0.5 to 160 MPa, capable of ultra-high pressure control with maximum accuracy of 0.01 %FS.

The CPC8000-H is a product with a pressure range of 0.5 to 160 MPa and a maximum accuracy of 0.01 %FS, offering excellent control stability. It is ideal for testing high-pressure measuring instruments and as a calibration standard for high-pressure applications. Auto-frettage processing and periodic pressure load testing can also be performed. Compressed air is required, and various media, including oil and water, can be used on the output side. The sensor can be easily removed. <Product Specifications> - Pressure range: 0 to 160 MPa * Equipped with a safety relief valve for overpressure protection - Control stability: 0.005% FS - Accuracy: 0.01% FS - Calibration interval: 365 days - Setting units: 38 units and two user-defined units - 9” color LC display, touch screen - Resolution: 4 to 7 digits - Supply pressure medium: Air or N2 - Power supply: AC 100-110V / 200-240V, 50/60Hz - Power consumption: 130 VA - Interface: IEEE-488.2, Ethernet, USB, RS-232 For more details, please refer to the product data sheet. [High Precision & High Pressure Compatible] Pressure Calibrator CPC8000-H

• Air compressors, blowers and pumps

Pressure range: 0.5 to 160 MPa, with a maximum accuracy of 0.01 %FS, this is a hydraulic controller capable of ultra-high pressure control.

The pressure calibrator CPC8000-H supports up to a maximum of 160 MPa. It excels in high precision and control stability, making it particularly suitable for automatic testing and calibration standards of high-pressure measuring instruments. The sensor can be removed from the front, eliminating the need to take the controller out of the calibration testing device. It also allows for auto-frettage processing and periodic pressure load testing. <Product Specifications> - Pressure Range: 0 … 160 MPa * Equipped with a safety relief valve for overpressure protection - Control Stability: 0.005% FS - Accuracy: 0.01% FS - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 9” Color LC Display, Touchscreen - Resolution: 4 … 7 digits - Supply Pressure Medium: Air or N2 - Power Supply: AC 100 ... 110V / 200 ... 240V, 50/60Hz - Power Consumption: 130 VA - Interface: IEEE-488.2, Ethernet, USB, RS-232 For more details, please refer to the product data sheet. 【Supports up to 160 MPa】Pressure Calibrator CPC8000-H

• Air compressors, blowers and pumps

The pressure range is 1 to 1,000 mbar, with an accuracy of 0.1% FS, and it is a portable type of micro pressure controller that does not require a power supply unit.

The CPC2000 is battery-operated and can generate both positive and negative pressure from an integrated electric pump. It can be used as a pressure calibrator and controller for micro-pressure measurements in air conditioning, filtration, clean rooms, medical technology devices, and precision pressure measuring instruments. <Product Specifications> - Pressure Range (mbar): 0–1, 0–10, 0–50, 0–100, 0–500, 0–1,000 - Accuracy: FS±0.3% or 0.1% - Calibration Interval: 365 days - Setting Units: Pa, kPa, hPa, bar, mbar, psi, inH2O, inHg, mmHg, Torr - Overpressure Protection: FS x 5 times or 2 times - Size: 102.6 x 257 x 271 mm - Weight: 4.6 kg - Internal Pressure Supply: Electric pump - IP Rating: IP20 - Resolution: 4–5 digits - Supply Medium: Air - Wetted Materials: Ni, Al, CuBe, PUR - Power Supply: DC 24 V, 1A - Power Consumption: 24 VA For more details, please refer to the product data sheet. Micro Pressure Calibrator Model CPC2000 Portable Micro Pressure Calibrator Model CPC2000

• Air compressors, blowers and pumps

The pressure range is 1 to 1,000 mbar, with an accuracy of 0.1% FS, and it is a portable type of micro pressure controller that does not require a power supply unit.

A pressure calibrator and controller that excels in measuring low pressure. It is a battery-operated pressure controller that generates pressure set by automation. The pressure generation uses a built-in electric pump and can handle both positive and negative pressure. <Product Specifications> - Pressure Range (mbar): 0–1, 0–10, 0–50, 0–100, 0–500, 0–1,000 - Accuracy: FS ±0.3% or 0.1% - Calibration Interval: 365 days - Setting Units: Pa, kPa, hPa, bar, mbar, psi, inH2O, inHg, mmHg, Torr - Overpressure Protection: FS x 5 times or 2 times - Size: 102.6 x 257 x 271 mm - Weight: 4.6 kg - Internal Pressure Supply: Electric pump - IP Rating: IP20 - Resolution: 4 ... 5 digits - Supply Medium: Air - Wetted Materials: Ni, Al, CuBe, PUR - Power Supply: DC 24 V, 1A - Power Consumption: 24 VA For more details, please refer to the product data sheet. Portable Low Pressure Controller Model CPC2000

• Air compressors, blowers and pumps

Range: -100 kPa to 21 MPa, with an accuracy of 0.02%, this is a cost-effective pressure controller.

The portable pressure controller CPC4000 features: - A wide pressure range from -100 kPa to 21 MPa - Up to 2 built-in sensors - Switching between atmospheric pressure, absolute pressure, and gauge pressure display <Specifications> - Pressure range: 0.02% FS or IS-50 - Gauge pressure: 0...35 kPa to 21 MPa - Differential pressure: -100 kPa...1 MPa to -100 kPa ... 21 MPa - Absolute pressure: 0...100 kPa to 21.1 MPa - Accuracy: FS±0.02% or 0IS-50 - Calibration interval: 365 days - Setting units: 38 units and two user-defined units - 7.0” color LCD display, touch screen - Resolution: 4 to 6 digits - Supply pressure medium: Air or N2 - Power supply: AC 100–110V / 200–240V, 50/60Hz - Power consumption: 120 VA - Interfaces: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. Portable Pressure Controller CPC4000

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 21 MPa, accuracy: 0.01% FS, or IS-50 modular pressure controller.

The CPC6050 can accommodate up to two sensors and regulators, each of which can be controlled independently. An atmospheric pressure sensor can also be integrated, allowing for switching between atmospheric pressure, absolute pressure, and gauge pressure displays. It offers many applications for calibration, production processes, and more. <Specifications> - Pressure range: -100 kPa to 21 MPa - Gauge pressure: 0...21 kPa to 21 MPa - Differential pressure: -1.2 kPa...1.2 kPa to -100 kPa to 21 MPa - Absolute pressure: 50 kPa to 21.1 MPa - Accuracy: FS ±0.01% or 0IS-50 - Calibration interval: 365 days - Setting units: 38 units and two user-defined units - 8.9” color LC display, touch screen - Resolution: 4...6 digits - Supply pressure media: Air or N2 - Power supply: AC 100–110V / 200–240V, 50/60Hz - Power consumption: 120 VA - Interfaces: Ethernet, IEEE-488, USB, RS-232, WiFi For more details, please refer to the product data sheet. Portable Pressure Controller Model CPC6050

• Air compressors, blowers and pumps

Pressure range: -100 kPa to 40 MPa, maximum accuracy: 0.008%. This is a high-pressure compatible pressure controller of IS-33.

The CPC8000 is a high-pressure compatible pressure controller with a maximum accuracy of 0.008% IS-33. The pressure range is from -100 kPa to 40 MPa. It achieves precise measurements with up to three removable transducers and one standard atmospheric pressure gauge. Thanks to its software functionality, it can be replaced with pressure controllers from other manufacturers. <Product Specifications> - Pressure Range: -100 kPa to 40 MPa - Maximum Accuracy: 0.008% IS-33 - Control Stability: <0.002% FS - Uncertainty: 0.008% - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 9” Color LC Display, Touchscreen - Resolution: 1 to 10 PPM - Supply Pressure Medium: Air or N2 - Power Supply: AC 100 ... 110V / 200 ... 240V, 50/60Hz - Power Consumption: 120 VA For more details, please refer to the product data sheet. [Accuracy: 0.008%] Precision Pressure Controller CPC8000

• Air compressors, blowers and pumps

Pressure range: 0.5 to 160 MPa, capable of ultra-high pressure control with maximum accuracy of 0.01 %FS hydraulic controller.

It offers high precision and excellent control stability, making it ideal for automatic testing and calibration standards of various types of high-pressure measuring instruments. It can also perform auto-frettage processing and periodic pressure load testing. The air control circuit requires compressed air, and the output side can be either oil or water, but other media can also be used according to requirements. The sensor can be removed from the front, eliminating the need to take the controller out of the calibration testing device. <Product Specifications> - Pressure Range: 0 … 160 MPa * Equipped with a safety relief valve for overpressure protection - Control Stability: 0.005% FS - Accuracy: 0.01% FS - Calibration Interval: 365 days - Setting Units: 38 units and two user-defined units - 9” Color LCD Display, Touchscreen - Resolution: 4 … 7 digits - Supply Pressure Media: Air or N2 - Power Supply: AC 100 ... 110V / 200 ... 240V, 50/60Hz - Power Consumption: 130 VA - Interface: IEEE-488.2, Ethernet, USB, RS-232 For more details, please refer to the product data sheet.

• Air compressors, blowers and pumps

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Grabee is a next-generation monitoring solution equipped with new features specialized for forest fire and wildlife damage prevention, based on AI video analysis and location estimation technology developed at Guardian. In addition to the conventional location estimation function, it now includes flame identification and animal identification capabilities, enabling early detection and response to forest fires and wildlife damage. Furthermore, it supports mapping of fire areas and area calculations.

Syspro Inc. exhibited at the "General Affairs, Human Resources, and Accounting Week [Tokyo] within the 'HR EXPO'" held at Tokyo Big Sight from June 25 (Wednesday) to June 27 (Friday), 2025. Thanks to everyone, we had many visitors and were able to conclude the event successfully. We would like to take this opportunity to express our deep gratitude to all the attendees and the organizers.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On August 5, 2025 (Tuesday), they published a page titled "Are Business Talks and Negotiations Determined by 'Preparation'? 'Hot Reading'". 'Hot Reading' involves researching the other party in advance and appearing to know things during the conversation to gain their trust. The page explains the benefits of using it, the specific process, relatable examples, two types of information for business use, and important points to keep in mind. (Page Overview: Excerpts) ■ What is 'Hot Reading'? ■ Benefits of 'Hot Reading' ■ Relatable examples of 'Hot Reading' ■ Differences from 'Cold Reading' ■ How to use it in business: Personal & Public Information Gathering ■ Precautions when utilizing 'Hot Reading' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/hot-reading-2025-08/