★Techne Measurement★ WEB Announcement of the addition of the "CRDS Trace Moisture Meter" page

Measurement of trace oxygen concentrations in the ppt/ppb range in various gases is possible!

● Adopts high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurements at low flow rates ● Wide measurement range The HALO OK series covers quality assurance for welding, medical, industrial applications, and high-purity gas production, as well as cylinder filling, and is also applicable for bulk transport and during transfer points. This product is unrelated to the complex and difficult-to-handle technologies of the 20th century, which are also costly and labor-intensive. There is no need for calibration or spare parts, and you no longer have to worry about measurement range limitations, drift, or waiting times for measurements. Startup and operation can be easily performed.

• others

It is possible to measure trace amounts of moisture in the ppt/ppb range in various gases, as well as trace concentrations of CO, CH4, NH3, and others!

● Adoption of high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurements at low flow rates ● Wide range of measurements possible in various sample gases The HALO3 series covers quality assurance for welding, medical, industrial applications, and high-purity gas production, as well as cylinder filling, and is also applicable for bulk transport and during transfer points. This product is unrelated to the complex and cumbersome technologies of the 20th century, which are costly and labor-intensive. There is no need for calibration or spare parts, and you no longer have to worry about measurement range limitations, drift, or waiting times for measurements. Both startup and operation can be easily performed.

• others

It is possible to measure trace moisture in the ppt/ppb/ppm range in various gases, as well as trace concentrations of CO, CO2, NH3, and others!

● Adopts high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurements at low flow rates ● Wide measurement range The HALO3 series covers applications from quality assurance in welding, medical, and industrial uses to high-purity gas production and cylinder filling, and is also applicable for bulk transport and during transfer points. This product is unrelated to the complex and cumbersome technologies of the 20th century, which are costly and labor-intensive. There is no need for calibration or spare parts, and you no longer have to worry about measurement range limitations, drift, or waiting times for measurements. Setup and operation can be done easily.

• others

It is possible to measure trace amounts of moisture in various gases and trace concentrations of CO, CO2, NH3, etc.!

● Adopts high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurements at low flow rates ● Wide range of measurements possible in various sample gases ■ The SPARK series covers quality assurance for welding, medical, industrial applications, and high-purity gas production, as well as cylinder filling, and is also applicable for bulk transport and during transfer points. This product is unrelated to the cumbersome, complex, and costly technologies of the 20th century. No calibration or spare parts are needed, and there is no need to worry about measurement range limitations, drift, or waiting times for measurements. Startup and operation can be easily performed.

• others

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK