[Video Update!] Introduction of the Folding Water Stop Board F-shield

Anyone can easily, quickly, and conveniently implement flood prevention measures with the foldable water barrier F-shield.

This is a water barrier made by Furukawa Electric that replaces sandbags to prevent flooding damage from typhoons, floods, and sudden heavy rains. It can be stored compactly when folded during normal times. In the event of a disaster, it demonstrates excellent water-stopping ability and stability simply by placing three components on the ground. It can quickly respond to sudden flooding damage. 【Features】 ■ Easily and securely prevents flooding into buildings! - It has an excellent water-stopping performance with a height of 50 cm and a leakage rate of approximately 200 liters/(h·m²). (Note) This result is based on internal tests referring to JIS A 4716. (Note) The values are experimental values at a water level of 50 cm and are not guaranteed values. ■ Can be stored compactly and managed easily! - It can be folded and stored in shelves or narrow spaces, so it does not take up much space. ■ Anyone can easily and quickly transport and assemble it! - It can be quickly and easily installed in various locations such as in front of entrances, factories, underground parking lots, and garages without the need for construction. - It can be set up in about 2 minutes for a 2-meter opening. - It is lightweight, making it easy for women to carry. HP: https://www.furukawa.co.jp/foam/product/f-shield/

• Entrance/Exterior Doors
• Flood prevention facilities, fire tanks, and flood control ponds
• Other office supplies

Can be easily installed by one person in a short time, contributing to flood damage prevention. Lightweight and space-saving for storage. The maximum water stop height is 50 cm.

The "F-shield" is a lightweight water barrier that can be easily assembled by placing it on the ground and locking the fittings, effectively preventing flooding damage from typhoons, floods, and sudden heavy rains. When folded, it becomes as thin as 80mm, allowing for space-saving storage in narrow areas such as shelves, entrances, garages, and warehouses. The water barriers can be connected to each other, with each connection allowing for a maximum width adjustment of 50mm and an angle adjustment of ±5°, making it adaptable to various widths and shapes of openings. 【Features】 ■ Leakage amount: approximately 200L/(h·m2) *This is not a guaranteed value but based on our test results. ■ Lightweight at 5.8kg per unit (5.3kg for end pieces). ■ Can be installed for 10 meters with just one person in about 10 minutes. ■ Reusable and long-lasting. ■ No special construction is required, and disposal is easy. *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

• Water stop

Lightweight, quick, easy, and convenient flood prevention product compared to sandbags: Folding flood barrier F-shield.

Mr. Yamamoto is responsible for the overall safety management operations of the company in the Safety and Environmental Department of the Production Headquarters at Special Spring Industry Co., Ltd. "There are first-class rivers, the Inagawa and the Darokugawa, near our factory, and when typhoons or linear precipitation zones occur, there is a risk of these rivers flooding. In fact, a major typhoon passed through Hyogo Prefecture in 2018, and at that time, we were really on the brink of river flooding. Therefore, it was necessary to present a sufficient BCP (Business Continuity Plan) to our customer, the automobile manufacturers, in preparation for potential river flooding." "The foldable water stop board F-shield is lighter than sandbags, making it easy to transport and set up. Unlike sandbags, which require the cumbersome task of filling and emptying with water, it can be easily installed and stored just by locking the fittings." A new disaster prevention warehouse has been established right next to the factory's main gate, where the foldable water stop board F-shield is stored, ensuring that it can be set up immediately in case of an emergency." "I want to earn the trust of our customer, the automobile manufacturers, by presenting a sufficient BCP (Business Continuity Plan) in preparation for river flooding."

• Entrance/Exterior Doors
• Flood prevention facilities, fire tanks, and flood control ponds
• Other office supplies

Lightweight, quick, easy, and convenient flood prevention product compared to sandbags: Folding water barrier F-shield.

Mr. Kamiyama is involved in the management of two companies: Miyauchi Construction Co., Ltd., which is engaged in the construction industry, and Koshiki Fruit Garden Co., Ltd., which handles the production, processing, sales, and café operations of passion fruit. "The area around our company is at a low elevation, and the sea level can rise and fall repeatedly in a short time due to 'abiki,' causing the roads to flood. Three years ago, for the first time, we piled sandbags in front of the fruit processing factory, but it was a huge task. The occurrence happened around 8 PM, and I had been drinking, so I couldn't drive a truck. Therefore, I asked someone from work to transport the sandbags stored in the fire department's warehouse by car. 'Abiki' can raise the water level in about 30 minutes. I felt that it would be too late to go and get the sandbags and stack them." "The foldable water barrier F-shield takes up little space when stored folded and can be set up quickly. It is lightweight, making it easy for elderly women working in our processing factory to handle, and it looks better than sandbags, so it can be placed in visible areas without worry. I want to be well-prepared for sudden 'abiki' with the foldable water barrier F-shield."

• Entrance/Exterior Doors
• Flood prevention facilities, fire tanks, and flood control ponds
• Other office supplies

Lightweight, quick, easy, and convenient flood prevention product compared to sandbags: Folding flood barrier F-shield.

**Expert in Power Distribution Board Manufacturing: Takahashi Electric Co., Ltd.** Mr. Watanabe works in the General Affairs Department of Takahashi Electric Co., Ltd., which is responsible for the manufacturing of power distribution boards that are indispensable in modern social infrastructure. **Risk of Rainwater Infiltration into the Factory! Safety Measures and Risk Management at the Sheet Metal Factory** "At the entrance of our sheet metal factory, a small hill forest is encroaching, and during typhoons or heavy rain, there is a risk that rainwater will flow from the forest into the factory entrance. Since there are expensive equipment such as laser processing machines inside the factory, it was necessary to implement risk management to prevent rainwater from entering the factory entrance. We considered stockpiling sandbags, but they are heavy and deteriorate quickly, causing the contents to spill out. Therefore, we concluded that sandbags were insufficient as a safety measure for the factory." **Preparing for Flood Damage to the Factory with the Folding Water Stop Board F-shield** "The folding water stop board F-shield is easy to handle because it is foldable, allowing for timely storage and movement. Additionally, its bright yellow color enhances visibility, which is also appealing. I appreciate its sturdiness compared to sandbags, making it more user-friendly."

• Entrance/Exterior Doors
• Flood prevention facilities, fire tanks, and flood control ponds
• Other office supplies

Usable both during normal times and in emergencies! A shelter mat with three functions: wall cushioning material, floor mat, and partition!

The "Skill-Free Evacuation Mat" is a foam polyethylene mat that has three functions: cushioning material, floor mat, and partition. During normal times, it functions as cushioning material to protect children and the elderly from injury by being attached to the walls of evacuation shelters without occupying storage space. On the other hand, during evacuation, it can be used as a floor mat or partition to ensure comfort, privacy, and social distancing, contributing to the improvement of the living environment in evacuation shelters. 【Features】 ■ High cushioning and a thickness of 30mm provide a comfortable seating experience! ■ High thermal insulation reduces cold from the ground! ■ High water resistance allows for washing! It is hygienic as it does not attract mold or insects! ■ Used as a partition to ensure privacy and prevent virus droplets! ■ Easy assembly by simply sticking Velcro together! Even children and foreigners can intuitively assemble it! ■ Usable as a kids' space or cushion for everyday use! Product HP: https://www.furukawa.co.jp/foam/mat/

• Other flooring materials
• Other office supplies
• stretcher

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Our seminar, “Back-Office DX in the Era of Digital Salary Payments,” was featured on HAB News Squash (Hokuriku Asahi Broadcasting) This seminar was co-hosted by Kort Valuta Inc. and Schult Social Insurance & Labor Consultant Office, and was held on January 19, 2026, for companies based in Ishikawa Prefecture https://www.hab.co.jp/news/article/202601217724.php As cashless payments continue to expand, digital salary payments are gaining attention across Japan. The coverage highlights current challenges faced by regional SMEs, including limited information and know-how, as well as key considerations and benefits for implementation. ▶️The seminar video featured in the news is now available on YouTube https://www.youtube.com/watch?v=GlHcFSTrFHM

Our company will release the 10.1-inch Windows tablet "TW2A-NF9LTA" equipped with an NFC reader/writer in March 2026. This product is a business-oriented model that comes standard with a dedicated OS for specific applications, "Windows 11 IoT Enterprise LTSC 2024 (64bit)," which enables long-term stable operation. With the built-in NFC reader, users can simply hold their IC cards, including My Number cards (and My Number health insurance cards), for identity verification without the need for an external card reader. It supports a wide range of business scenarios utilizing NFC, such as access control, attendance management, and cashless payment terminals in restaurants. Additionally, as a tablet for business use, it is equipped with features and specifications that are in high demand during operation. It includes our original business efficiency app "NFC Optimizer for Windows," our proprietary "Battery Protection Mode" for safe operation during AC constant power supply, and a feature that allows the product's power to be turned ON/OFF in conjunction with the power breaker, all achievable without incurring development costs for dedicated software, only requiring costs for the kitting process.

We will introduce the ultrasonic microscopy observation of semiconductor packages that we conduct. Due to storage conditions and mounting conditions, delamination may occur between the metal parts (die pad) and the package resin in semiconductor packages. Delamination inside the package is a defect that significantly affects product quality, but it cannot be detected from the appearance. By using ultrasonic microscopy, we can clearly capture the internal structure of the package and contribute to reliability evaluation.

Here is an example of observing the adhesive condition through a metal plate using an ultrasonic microscope. An ultrasonic microscope can confirm internal information that cannot be seen from the outside, as long as the ultrasonic waves can pass through. We observed the condition of the adhesive remaining on the metal plate from the metal side in a sample where the chip came off after reliability testing. Please refer to the PDF document for details and results of the observation.