【Examples of ZEROSAI Implementation】 Chiba Prefecture Medical Center Construction Project Utilized pinpoint forecasts on-site to avoid the risk of sudden heavy rain! Achieved weather DX using ICT!

Utilize pinpoint forecasts on-site to avoid the danger of strong winds!

We will introduce examples of the implementation of the natural disaster prevention system ZEROSAI (NETIS registration number QS-150021-VE) in civil engineering and construction work in the construction industry. It can be utilized not only for safety measures but also for creative ideas and technical proposals. Challenges on Site: Key Focus Points for Evaluation [Operational Environment] - Install the [N Sensor] near the site office to manage rainfall and wind speed. - Use the real-time wind speed values observed by the [N Sensor] to determine when to stop crane operations. - Issue a work stoppage directive when the real-time rainfall observed by the [N Sensor] exceeds the threshold value. [Purpose of Implementation] - Due to the proximity to the sea and the lack of obstructions, the wind speed often exceeds the work stoppage threshold of 10 m/s two to three times a day. Since there is a rule that crane operations must absolutely stop when the wind speed reaches 10 m/s or more, it is essential to understand the wind conditions. - When performing concrete pouring or painting work, operations cannot proceed if it rains, so it is crucial to predict, observe, and timely grasp the rainfall situation.

• Crane and others

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation caused by temperature differences in environments such as low-temperature warehouses is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchen entrances. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), making the main unit washable with water (note: the wall surface (back side) is not included) ○ LED display and response sound allow for immediate confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

On August 19th (Tuesday), the Japan Meteorological Agency announced the three-month forecast from September to November. During this period, the upper-level westerlies are expected to flow more to the north than usual, and the Tibetan high-pressure system is anticipated to be stronger and positioned further north than average. *For more details, please visit our website or feel free to contact us.*

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Crossnote, which allows for the efficient creation and maintenance of thick specifications, regular reports, manuals, and other documents, has undergone a major version upgrade to ver 3.0. Crossnote is a system designed for multiple users to efficiently create and maintain documents. Unlike Wiki or Markdown, it achieves a "what you see is what you get" usability similar to Word. In this major version upgrade, both the client and server frameworks have been updated to the latest versions, improving security measures, operational environments, and compatibility with the latest technologies. Additionally, numerous functional improvements have been made. By updating the framework, we have further accelerated our support for AI.