We will be exhibiting the Static Mixer 2800 and the Corrosive Gas Removal Device, Coro Shooter, at INCHEM TOKYO 2023.

A static mixer that can stir using only an inline plate. Suitable for the stirring and mixing of coagulants in individual liquid separation. *We will be exhibiting at the Sewerage Expo '24 Tokyo.

The J.M.S. Static Mixer 2800 is a revolutionary inline mixer that mixes with just one plate. Its simple design makes installation and cleaning easy. When used for injecting coagulants for liquid separation, it enhances the efficiency of separators and contributes to energy savings in factory plants. Additionally, it can be easily utilized by simply installing the plate in the piping like an orifice, allowing for easy installation and minimizing installation costs. 【Features】 ■ Contributes to the efficiency of separators ■ Easy to install ■ Installation costs can be minimized *For more details, please download the PDF or contact us.

• pump

Removal efficiency of corrosive gases is over 95%! It reduces maintenance frequency and prevents major damage to control equipment in advance. *We will be exhibiting at the Sewerage Expo '24 Tokyo.

◆It is effective for maintaining control panel equipment! You can reduce the frequency of maintenance!◆ It protects independently installed control panels and operation panels from internal corrosion caused by corrosive gases, preventing various losses due to troubles with control and electrical equipment inside the panel. Additionally, it can be adapted to control panels installed in various locations, such as those outside the instrument room or in areas where corrosive gases are present. 【Features】 ■Removal speed: approximately 0.0PPm (hydrogen sulfide) in about 400 seconds from 2.0PPm ■Removal efficiency of over 95% (due to the airtightness of the control panel) ■Three types of MODELS available according to installation space ■Adsorbent modules are environmentally friendly and made from recycled paper *For more details, please check the request for materials or download the catalog.

• Air conditioning equipment

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Our first zero-phase current transformer (ZCT) CTL-36-S80-12Z-CL - Waterproof design allows for outdoor installation - Split-type design enables easy installation on existing setups - Customizable according to your requirements For more details, please contact us.

Compact yet multifunctional. A constant voltage power supply with a multifunctional specification that expands lighting control capabilities by supporting the connection of two lighting devices. We have launched the compact power supply "LPAVR2-2472D." It is a DC input type constant voltage control power supply condensed into a palm-sized resin case, offering ease of use and flexible dimming functions. The LPAVR2-2472D is a power supply unit that balances space-saving design with flexible dimming capabilities. It can be utilized in a wide range of scenarios, such as adjusting the brightness of LED lighting and voltage control applications within devices. Product Features: ● High-performance constant voltage power supply that supports long and large lighting despite its compact size ● Made with a resin case, it features analog settings for two channels and multifunctional specifications ● Flexible dimming function compatible with internal and external dimming (0-5V) ● Output voltage can be switched in three stages, ensuring safety ● Excellent installation with screwless terminal blocks and DIN rail compatibility For detailed specifications or inquiries about installation, please feel free to contact us.