Announcement of the new release of industrial media converters "MCI2852-005" and "MCI2852-10".

4-slot modular chassis with a height of 1U and half-width size for a 19-inch rack.

The LEX3000 series can accommodate up to four line cards (three when equipped with the LEX3930-00 (SNMP management card)). Additionally, the chassis slots feature a special insertion and removal structure that allows for smooth card insertion and removal, preventing the loss of screws. This product provides cost-effective, high-density network connections for communication hubs. *The LEX3004 does not include the LEX3000 series line cards, power modules, or SNMP management cards. These must be purchased separately. *For more details, please contact us or download the catalog.

• Wiring devices
• Internet System

World's smallest class! Remote monitoring with Ethernet OAM compatible media converter series! 【*Free demo units available】

■Achieved the world's smallest size for Ethernet OAM compatible gigabit media converters (Note 1). ■Made in Japan, domestic quality. ■Adopts an intuitive and easy-to-understand Japanese GUI. (CLI is also available) ■Equipped with comprehensive maintenance features. ・In-band monitoring function. Remote monitoring/control is possible via link OAM (IEEE802.3ah). ・Equipped with Ethernet OAM functionality. (IEEE802.3ah, IEEE802.1ag, ITU-T Y.1731) ・Link pass-through function included. ■Stable transmission quality. (Shaping control/bandwidth control) ■Planned support for power failure notification function (Dying Gasp). (Note 1) Based on our research on standalone (single unit) gigabit media converters compatible with Ethernet OAM. ▼FXC offers a free two-week evaluation unit loan service for testing. Please feel free to contact us via the link below. *If we are unable to meet your desired delivery date, our sales department will contact you to make adjustments.

• Wiring devices

A modular chassis capable of accommodating up to 20 line cards for Ethernet OAM-compatible media converters.

The "LEX3020" is a 2U high, 19-inch rack-mounted chassis that can accommodate up to 20 media converters from the LEX3000 series. The chassis features a special insertion and removal structure in its slots, allowing the line card to tilt to the right when the screws are loosened during removal, causing the card to protrude forward. This design enables smooth insertion and removal of cards and prevents the loss of screws. Additionally, a tray for managing excess fiber lengths is incorporated at the bottom of the slots. For more details, please contact us or download the catalog.

• Wiring devices

The "NC1G Series" media converter enables the construction of networks for offices, factories, schools, and more at a low cost.

The NC1G series (AC Type) is a media converter that converts between 10/100/1000BASE-T and 1000BASE-X. The link supports only auto-negotiation and, while being cost-effective, is equipped with LFP (Link Fault Pass-Through) functionality. In the event of a link disconnection, it automatically disconnects the other link, which helps in identifying the cause of failures. This product features one 10/100/1000Mbps RJ45 port and one 1000BASE-X SFP port, and it uses the included AC adapter for power. The SFP slot is fixed for implementation, and there are three models available: one with a 1000BASE-SX SFP, one with a 1000BASE-LX SFP, and one with a single-fiber bidirectional (LC or SC) configuration. The single-fiber bidirectional model should be used in pairs, with one operating at 1310nm (Type A) and the other at 1550nm (Type B). For more details, please contact us or download the catalog.

• Wiring devices

Ideal for installation in locations where securing power is difficult, such as factories and remote areas (dams/riverside, etc.) - "NC1G-PE Series."

The "NC1G-PE series" is a media converter that converts between 10/100/1000BASE-T and 1000BASE-X. It is equipped with PoE receiving functionality (802.3af), making it an ideal product for installation in locations where securing power is difficult, such as factories or remote areas (dams/riverbanks) for surveillance cameras. Additionally, it features LFP functionality, which is helpful for identifying the cause of issues when they occur. For more details, please contact us or download the catalog.

• Wiring devices

Interop "Best of Show Award" winning product 10G compatible media converter "LEX3881-2F"

The "LEX3881-2F" is a media converter that supports Ethernet OAM and is equipped with Link OAM/CFM OAM functionality. It achieves the world's smallest size as an Ethernet OAM-compatible media converter (Note 1). The "LEX3881-2F" simultaneously implements 1G/10G-SFP, allows for automatic speed detection, and features various functions such as changing from two fibers to one, extending distance through long-distance 10G-SFP with two implementations, and changing rates from 1G to 10G. Additionally, it operates within a temperature range of -10 to 55°C, covering a wide range of temperature conditions. It also includes a Dying Gasp function that remotely notifies of power outages, allowing for quick responses in case of failures. (*) Based on our research on standalone (single unit) gigabit media converters compatible with Ethernet OAM. For more details, please contact us or download the catalog.

• Wiring devices

100BASE-FX/1000BASE-X media converter

■Achieved the world's smallest size (※1) as a Gigabit media converter supporting Ethernet OAM. ■Uses SFP optical modules. Compatible with 100BASE-FX/1000BASE-SX/SX2/LX/ZX. Single-core types (BiDi/BX) and CWDM-compatible SFPs are also available! ■Switch operation. Supports jumbo frames. ■Supports power loss notification function (Dying Gasp). ■Signal Detect can be confirmed via LED. ■Fanless design, made in Japan, domestic quality. (※1) Based on our research for standalone Gigabit media converters supporting Ethernet OAM. ●For more details, please contact us or download the catalog.

• Wiring devices

World's smallest Ethernet OAM-compatible media converter.

- Achieved the world's smallest size (as of April 18, 2018, according to our research) for an Ethernet OAM compliant gigabit media converter. - Optical module uses SFP. Compatible with 100BASE-FX/1000BASE-SX/SX2/LX/ZX. Single-core types (BiDi/BX) and CWDM-compatible SFPs are also available! - Switch operation. Supports jumbo frames. - Supports power loss notification function (Dying Gasp). - Signal Detect can be confirmed via LED. - Fanless design, made in Japan, domestic quality. For more details, please contact us or download the catalog.

• Wiring devices

The seismic sensor device "HK-2" detects strong tremors equivalent to a seismic intensity of 5 or higher, transmits a signal to the control room, and emergency stops the facility equipment. 【Installation Location】 Automotive parts factory 【Challenges】 Due to the maintenance and replacement of the factory equipment control devices, we considered updating the existing seismic sensors as well, but since production had already ended, we were looking for alternatives. 【Effects After Installation】 The HK-2 has the function to emergency stop equipment during an earthquake, and since its functionality is the same as the existing device, it was introduced as a replacement. Its compact size also allowed it to fit within the existing control panel being used. ★See more examples of the seismic sensor device "HK-2" https://www.hotron.co.jp/recommend/HK-2_lp.html#anchor_a04 ◎For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

On December 23rd (Tuesday), the Japan Meteorological Agency announced the three-month forecast for January to March. During this period, there will be times when the extension of the Siberian high pressure is weak to the northeast and strong to the southeast, which may lead to the influence of cold air from the west. As a result, temperatures nationwide are expected to be nearly average from January to February. For more details, please visit our company website.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.