Lightweight even though it's made of steel! Lightweight steel sliding door.

Sleek and lightweight steel sliding door.

The interior of the door is a lightweight steel sliding door that uses an aluminum frame with honeycomb material and foam insulation. It can be used for a wide range of applications, from human entry to the transport of large machinery. The interior consists of a lightweight steel sliding door made of an aluminum frame, honeycomb material, and styrene foam, with a surface material made of thin steel plates ranging from 0.4mm to 0.8mm, allowing for easier opening and closing compared to standard steel sliding doors. There are three types of opening and closing mechanisms available: manual, self-closing, and automatic. The rail cover can also be optionally equipped with a sanitary cover (sloped cover). The guide block is stored inside, and the opening is sealed with a rubber seal to enhance airtightness. In addition to being shipped with rust-proof paint, it can also be shipped with baked-on paint in specified colors. It is possible to change the viewing window and edge material to stainless steel, resulting in a highly customizable lightweight steel sliding door. *1 Two locations (one set) at the door head and door tail. * This door does not qualify as a specific fire protection facility or fire protection equipment. Customers considering its use as fire protection equipment according to structural regulations should contact our sales representative. * A 1.6mm thick steel edge material surrounds the door body.

• Interior/Interior Doors
• Steel Door
• Sliding door

Lightweight and smart stainless steel sliding door

This is a stainless steel sliding door with excellent weather resistance. Except for some visible parts, it is made entirely of stainless steel, making it suitable for rooms where aluminum or steel cannot be used due to chemical resistance and other factors. The surface material of the door itself is made of stainless steel plate as thin as 0.5mm, and the interior consists of an aluminum frame and either paper honeycomb or styrene foam, allowing for very lightweight opening and closing compared to typical stainless doors. It is available in three types: manual, self-closing, and automatic, and the stainless steel rail cover can optionally accommodate a sanitary cover (sloped cover). The guide block is stored inside, and a rubber seal is rotated at the opening to enhance airtightness. The surface material can also be made of colored steel plates or aluminum in addition to stainless steel plates. It can accommodate different surface materials on each side, such as one side being stainless steel and the other side being colored steel. The guide block is located at two points (one set) at the leading and trailing edges of the door.

• Steel Door
• others

Individually certified fire protection equipment 'Legacy Shield' series! Individually certified product with transparent glass, 60-minute fire-resistant specific fire sliding door.

This is a steel self-closing sliding door that has been certified by the Minister of Land, Infrastructure, Transport and Tourism as a specific fire prevention device (fire door). It has obtained certification with transparent glass that does not have any mesh, ensuring a clear line of sight even in fire compartments. It is a type that attaches the rail directly to the wall, allowing for installation at a later time. Additionally, it has a three-sided frame without a bottom frame, eliminating any step and allowing for smooth passage of carts and other items. Shipping with solvent-baked coating is also possible from our own factory.

• Special function opening

Supports lightweight partitions! Utility lightweight steel sliding door.

This is a versatile sliding door that can accommodate lightweight partitions and RC structures, suitable for a wide range of applications from standard door sizes to large sizes for the entry and exit of heavy machinery. It is an ultra-lightweight steel sliding door that can be used for various purposes, from pedestrian access to large doors for heavy machinery. The frame of the opening can be selected from aluminum, steel, or stainless steel, all of which feature a rubber seal that closes the gap between the door and the frame. The opening and closing methods include manual, self-closing, and automatic options. Additionally, it is possible to have the rail cover as a sanitary cover (sloped cover) as an option. The guide blocks are stored inside the door at two locations, at the leading edge and the trailing edge, for each set.

• Entrance/Exterior Doors
• Sliding door
• Automatic door opening and closing devices for entrances and exits (auto doors)

Automatic sliding doors with automatic closure during emergencies and fire protection equipment compatibility.

Automatically opens and closes, even in emergencies! This is an automatic sliding door that complies with fire protection equipment and specific fire protection equipment regulations. It automatically closes upon receiving signals from fire alarms or smoke detectors, and as a standard feature, it is equipped with an emergency battery, allowing it to close automatically even if power is cut off during a fire. The automatic door engine is compatible with products from Fuso Electric Industry and Hashida Giken. *1 We believe that it meets the requirements for specific fire protection equipment, but interpretations may vary depending on the inspecting administrative agency, so please be sure to check with the relevant administrative agency in your installation area beforehand. *2 It can also be configured without a battery.

• Special function opening
• others

Fire-resistant equipment compatible! Directly mounted type self-closing steel sliding door.

A direct-attach steel sliding door that can be added to fireproof insulation panels! This is a type of steel sliding door that attaches directly to the wall with rails. It is designed with installation on fireproof insulation panels in mind, and can be used as a fire protection facility (with a 6.8mm wire glass window or without a window) or as a specific fire protection facility (only without a window). It supports single and double sliding configurations. *1 It can also be adapted for walls other than fireproof insulation panels. Please contact us for details. *2 We believe that it meets the requirements for fire protection facilities and specific fire protection facilities; however, interpretations may vary depending on the administrative agency conducting the inspection, so please be sure to confirm with the local administrative agency in advance.

• Special function opening
• others

Fire-resistant equipment compatible! Lightweight partition wall storage type steel sliding door.

A built-in steel sliding door that fits neatly within the wall! This is a type of sliding door that is stored within a lightweight partition wall. Since the overhead rail is also built into the wall, it is designed to minimize dust accumulation on the top of the rail, making it easy to clean. It comes standard with a sliding closer without a rail stop, and the surface material is made of 1.6mm steel plate. It can be used with a window as a fire protection device, or without a window as a specific fire protection device. *1 The compatible thickness for the lightweight partition wall is only 115mm. *2 Only 6.8mm wired glass. *3 This product meets the requirements of relevant laws and regulations for specific fire protection devices and fire protection equipment; however, interpretations of the law may vary depending on the administrative agency conducting the inspection. It is recommended to confirm the legal compliance of this product with the administrative agency in the area where it will be installed.

• Other fittings
• others

Many doors and windows with high airtightness and thermal insulation! Custom sizes can be ordered in 1mm increments.

Our company offers a wide range of specialized fixtures such as "doors" and "windows" with higher functionality than those for general buildings, used in factories, clean rooms, and various testing laboratories! 【Example of fixtures featured in the catalog】 ◎ Ideal for low-temperature clean rooms: "Plastic Insulated Flush Door" ◎ Lightweight with a smart appearance: "Aluminum Frame Sliding Door" ◎ Suitable for large machinery loading and unloading: "Removable Machine Hatch" ◎ Fusion of sliding and flush doors: "Sliding Plus Door" ◎ No glass work required! Easy installation: "Aluminum FIX Window" Most products can be custom-made to 1mm increments! ★ Currently, we are offering a comprehensive catalog that covers all products ★ You can view an excerpt version by selecting "Download." If you would like the complete version, please request it through "Contact Us."

• Interior/Interior Doors
• Steel Door
• Clean Room

【Period: Ongoing until October 31, 2025】 For orders of 10 or more: Dry T-shirt 1 piece @1,800 yen (tax included) Dry Polo shirt 1 piece @2,300 yen (tax included) (Includes garment and one print location) For sizes 3L and above, an additional 550 yen An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee if submitting complete data) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

Tote Bag Print Campaign September 1 - October 31 Perfect for events, exhibitions, and store promotions! A useful tote that brings joy when received. Would you like to create a popular tote bag as a novelty item? We offer three convenient sizes. For more details, please contact us.

A site has been created where you can easily and quickly make one-of-a-kind original wear with Sagawa Printing! Photos, stamps, and text. You can design everything freely! Your design will become an original item just as it is.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.