【Analysis Know-How.com】μ-EXCEL data from the video site is now available for download!

Publication of an explanation of vector magnetic characteristic analysis technology for the realization of high-efficiency motors!

This document explains the vector magnetic characteristic analysis technology for achieving high-efficiency motors. This technology is supported by Professor Masato Enokizono (Emeritus Professor at Oita University, currently the representative of the Vector Magnetic Characteristic Technology Research Institute), and we have cited information from the Vector Magnetic Characteristic Technology Research Institute, which the professor leads. [Contents] 1. The target is the reduction of iron loss in electromagnetic steel sheets. 2. Iron loss is the sum of eddy current loss and hysteresis loss. 3. Vector magnetic characteristics of electromagnetic steel sheets. 4. Conventional measurements are scalar magnetic measurements. 5. Developed vector magnetic measurements. 6. Actual measurement results. 7. Database creation as magnetic characteristics. *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software

Supports low loss and high efficiency of EV motors! Capable of analyzing rotating magnetic fields and hysteresis.

"μ-E&S" is a iron loss analysis software that can simulate magnetic flux density, magnetic field, and iron loss distribution based on actual measurements of motor laminated cores. By analyzing vector magnetic characteristics, it can identify areas where iron loss occurs significantly, making it a useful analysis tool for reducing the size and weight of motors as well as for achieving low loss and high efficiency. 【Features】 ■ High-precision calculation of magnetic vectors ■ Capable of calculating rotating magnetic fields and hysteresis ■ Equipped with permanent magnet excitation function and torque calculation function *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software

Published on vector magnetic characteristic analysis technology for achieving high-efficiency motors!

This document is a technical column edited and compiled based on the content related to "Vector Magnetic Characteristic Analysis" mentioned in past newsletter columns. We would like to disseminate information on the importance of vector magnetic characteristic analysis technology for achieving high-efficiency motors. [Contents] ■1. Vector Magnetic Characteristic Analysis Technology - Prologue - ■2. Top Runner Method and IE4 ■3. Inverter Technology and Energy Saving ■4. Will Increasing Size Lead to IE3? ■5. Electrical Steel Sheets are Excellent ■6. Focus on the Vector Magnetic Characteristics of Electrical Steel Sheets *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

A basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet) motors is presented!

This document presents a basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet) motors. It provides a detailed explanation of the analysis model and objectives, as well as the magnetic flux lines, magnetic field distribution, and iron loss distribution results. [Contents] ■4.1 Analysis Model and Objectives ■4.2 Analysis Conditions and Calculation Time ■4.3 Magnetic Flux Lines, Magnetic Field Distribution, Iron Loss Distribution Results ■4.4 Results of Inclination Angle θB and Aspect Ratio α Distribution ■4.5 X-Direction Hysteresis Curve Results ■4.6 Y-Direction Hysteresis Curve Results ■4.7 Lissajous Waveform Results ■4.8 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a transformer model with directional materials is published!

This document presents an analysis example using a transformer model with directional materials. It provides detailed explanations of the analysis model and objectives, as well as the results of magnetic flux lines, magnetic field distribution, and iron loss distribution. [Contents] ■3.1 Analysis Model and Objectives ■3.2 Analysis Conditions and Calculation Time ■3.3 Results of Magnetic Flux Lines, Magnetic Field Distribution, and Iron Loss Distribution ■3.4 Results of Angle θB and Aspect Ratio α Distribution ■3.5 Results of Hysteresis Curve in the X Direction ■3.6 Results of Hysteresis Curve in the Y Direction ■3.7 Results of Lissajous Waveform ■3.9 Results of Current Waveform *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a model of non-oriented electrical steel sheet shaped into a ring is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel plates shaped into a ring. It provides detailed explanations about the ring model voltage source (differences in steel materials), magnetic field distribution, and iron loss distribution results. 【Contents】 ■2.1 Analysis Model and Objectives ■2.2 Analysis Conditions and Calculation Time ■2.3 Magnetic Field Distribution and Iron Loss Distribution Results ■2.4 X-Direction Hysteresis Curve Results ■2.5 Y-Direction Hysteresis Curve Results ■2.6 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a model of non-oriented electrical steel sheet shaped into a ring is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel plates shaped into a ring. It provides a detailed explanation of the ring model voltage source, as well as comparison results with measured hysteresis curves. 【Contents】 ■1.1 Analysis Model and Objectives ■1.2 Analysis Conditions and Calculation Time ■1.3 Magnetic Field Distribution and Iron Loss Distribution Results ■1.4 Alternating Magnetic Flux and Rotating Magnetic Field Results ■1.5 Comparison Results with Measured Hysteresis Curves ■1.6 Current Waveform Results ■1.7 Interface Settings Screen *For more details, please refer to the PDF document or feel free to contact us.*

• Other Software

Aiming for low loss, accurately measure the actual state of electromagnetic materials and understand and analyze their vector magnetic characteristics! Supporting low loss and high efficiency for motors used in EVs.

This is an introduction to the next-generation iron loss evaluation method, the "E&S Model." Based on an evaluation method called vector magnetic characteristics, it has become possible to obtain a more detailed loss distribution of steel materials as analysis results compared to conventional methods. It can calculate high-precision magnetic fields, magnetic flux densities, and iron loss distributions that are not achievable with other software. 【Features】 - By considering vector magnetic characteristics, magnetic vectors can be calculated with high precision. - Rotating magnetic fields and hysteresis can be calculated. - Finished as an easy-to-use tool specifically for iron loss evaluation. - Permanent magnet excitation function and torque calculation function. *For more details, please contact us or download the PDF.

• Scientific Calculation and Simulation Software

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.