Our company's video has been featured on the official YouTube channel of the Ministry of Agriculture, Forestry and Fisheries, maffchannel.

Realizing the IoT integration of pest capture. AI determines wild boars, deer, and other animals from camera images. The cloud system also makes it easy to view history.

Set the shooting time from your smartphone or PC (5 times a day). When the set time arrives, it will capture images of wild birds and animals caught in traps such as snares, box traps, and enclosures. The captured still images are sent to the cloud, where AI automatically analyzes the species and notifies you of the species identification results via email along with the still images. Since the identification can be made from still images, you can confirm the identity of the wild birds and animals, allowing for more efficient capture operations. Additionally, in daily use, you can check the feeding status, further enhancing the efficiency of patrol inspections. 【Features】 ■ Camera installed at the bottom of the main unit ⇒ Allows for adjustment of the shooting angle, and you can check the angle during installation using the built-in small monitor. ■ At night, infrared LEDs illuminate the wild birds and animals for shooting. * For more details, please contact us through the IPROS inquiry form or by phone. * Mentioning "I saw it on IPROS" will facilitate a smoother explanation. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS-ID, please inquire from the link below. External inquiry form: https://www.densin.co.jp/contact/

• IoT

Realizing the IoT integration of pest capture, it notifies via email when boars and deer are captured in snares, box traps, or enclosures, reducing the burden of patrols.

This is our self-developed "Pest Capture IoT System." 【Renewal Points】 1) Equipped with our self-developed microcontroller communication module board. 2) Comparison with conventional pest capture and notification sensors (compared to our previous model) 1. Achieved miniaturization (41% smaller) 2. Achieved weight reduction (800g → 500g) 3. Compatible with communication SIMs from both NTT Docomo and Softbank, making it SIM-free Like the previous model, the sensor can operate for one year using four AA alkaline batteries. Additionally, it adopts Michibiki A-GPS to accurately transmit the sensor's location information to the dashboard system. *For more details, please contact us via the IPROS inquiry form or by phone. *Mentioning "I saw it on IPROS" will facilitate a smoother explanation. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS ID, please inquire from the link below. External inquiry form: https://www.densin.co.jp/contact/

• IoT

When wild boars and other animals pass in front of the sensor, it detects them with an infrared sensor and uploads the date, time, location, detection count, as well as weather and temperature to the cloud.

The IoT wild animal detection sensor detects wild boars and other animals passing in front of the sensor using an infrared sensor, and uploads data such as date, time, location, detection frequency, as well as weather and temperature to the cloud. The detection and installation status is displayed on a map information system on the dashboard. Additionally, we aim to visualize the sighting information through a reporting system from local residents and hunting associations. By integrating the detection data accumulated in the cloud with the data from the sighting information system, we aim for effective capture by installing protective fences or traps in areas with high frequency of sightings. The device operates for three months on eight rechargeable batteries, and the remaining battery capacity can be checked on the dashboard to determine when to replace the batteries. *For more details, please contact us via the IPROS inquiry form or by phone. *It will be smoother if you mention "I saw it on IPROS." Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS-ID, please inquire from the link below. External inquiry form: https://www.densin.co.jp/contact/

• IoT

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.