日本金型産業 List of Products and Services

Durable protective coating for industrial products Significantly reduced setup time Easily removable Available in the most in-demand color, clear (transparent) Weight is approximately 12kg A safe product compliant with RoHS and REACH regulations, with SDS submission available.

• Work tools

1. The gate cut is good, and since the gate area does not decrease, the fluidity (moldability) hardly changes, and there is little change in appearance (such as with texture). 2. Made of nickel alloy electroformed material with a mirror finish on the inner surface, and the inner surface hardness is also HRC55-60, making it durable and wear-resistant. 3. It is strong against gas and has excellent corrosion resistance. 4. Compared to iron-based gate bushes, it has a high thermal conductivity, and because the inner surface is a mirror finish, the slope can be minimized, leading to a reduction in the molding cycle.

• others

The Z series is a mold positioning lock from PROGRESSIVE that incorporates a special ring into the sliding surface for smooth operation. It achieves significantly longer lifespan compared to conventional positioning locks. A wide range of sizes is standardized to match mold specifications, including bar locks, guide locks, side locks, and top locks.

• others

We can provide 11 types of round and square melting tank products equipped with safety thermostats. Standard voltage specifications: 115V and 220V. 220V and 440V specifications are available upon request.

• others

Maximum operating temperature Standard counter view (120℃) High-temperature counter view (190℃) 7-digit display Standardized in two types: for fixed side and for movable side

• others

Easy maintenance due to external mold attachment Standardized four rod diameters (14, 20, 32, 50mm) Easy attachment to the mold Simple structure with long lifespan Extension rods can be used as needed

• others

To extend the lifespan of molds, regular maintenance is necessary. By installing a counter view on the mold, the number of shots for that mold can always be monitored, regardless of the number of times it is attached to the molding machine, and the timing of maintenance can be managed accurately over the long term.

• others

SHGF Super Hard HRC63-65 Patent Obtained 【Wear Resistance】 The friction surface is made of nickel alloy, with hardness levels of 40-45, 55-60, and 63-65 HRC. It also exhibits excellent toughness, and the inner surface is mirror-finished, providing outstanding wear resistance. The Super Hard (SHGF) type is ideal for resin molding that requires wear resistance, including glass fibers. 【Corrosion Resistance】 There is no concern about corrosion for PVC-based and fluorine-based resin molding. 【Cost-effectiveness】 Compared to steel gate bushes, it has better thermal conductivity, and the mirror-finished inner surface allows for a smaller draft angle, contributing to high-cycle molding. 【Quality】 We have developed an electroforming method that is completely different from that of steel gate bushes, successfully manufacturing high-quality products with the above characteristics. 【Delivery Time】 We have stock of standard products to meet various shape and size requests.

• others

Rich variety of molding materials (such as silicone, acrylic, rubber, gypsum, ABS, PP, ULTEM, nylon, elastomers, etc.) High precision and high detail (layer pitch of 15μm, etc.) Significant reduction in development time (no need for mold production) Assemblies can also be molded (shapes that are impossible with machining are also acceptable!) Compatible with a wide range of printers

• molding
• others

Safety factor of 5 times. Lateral lifting, inversion, and pulling are possible during loading. Passed 20,000 usage tests.

• Hoist/Crane
• Material handling systems and equipment

Products with a temperature range of -40°C to +1400°C and heat resistance. Food machinery lubricating oil (NSF H1 grade) certified product.

• others

Non-hardening pipe thread anti-loosening, Teflon slick-tight sealant. Non-toxic, harmless, non-drying, and easily washable paste sealant. Comes with a brush on the lid. Heat resistance temperature -46°C to 260°C. Usable in food processing production facilities.

• Piping Equipment
• Fittings
• Piping materials (copper pipes, cast iron pipes)

Oxygen piping sealant paste. Completely stops leaks from high-pressure oxygen piping. It is an inert, non-corrosive, and non-flammable product, so it is safe to use. Heat resistance temperature: -196℃ to 232℃. ■ Made by LACO, USA.

• Welfare and medical equipment
• Safety and consumables
• Piping Equipment

A versatile cleaner that is highly effective for rust removal, oxidation prevention, and discoloration removal due to welding. It is a safe product as it does not contain hazardous substances, even when used with bare hands. It is NSF certified.

• Rust Inhibitor
• others

- This is a high-watt cartridge heater of the split sheath type, which fundamentally differs in manufacturing method from a typical cartridge heater. - The split type structure features an innovative design where the sheath parts are separated like two legs. - Since there is no non-heating section at the tip of the heater, it is effective for heating specific areas. - Due to thermal expansion, the two sheath parts expand outward, allowing them to closely adhere to the insertion hole of the mold, enabling high-temperature heating at low temperature settings. As a result, it has a lifespan 2 to 5 times longer than that of a standard cartridge heater. - Because the two sheath parts expand independently, warping does not occur, making it easy to attach and detach. - It can also be manufactured for industrial voltages (200V–240V) and household voltages (20V–120V). - Additionally, it is possible to incorporate an external sheath sensor in the gap between the two sheath parts, allowing for the replacement of just the sensor in case of a disconnection.

• others

A diffused heater refers to a high-quality tubular heater that is press-fitted and bonded within grooves in a die-cast body under a pressure of 50 tons. DALTON has established this manufacturing method and has a long history of providing diffused heaters to vaporized oil diffusion vacuum pump manufacturers around the world as heaters that offer long life and uniform, stable thermal diffusion. With a design that achieves optimal electrical characteristics and a combination of over 100 groove hole processes and ring heaters, it is possible to offer standard sizes ranging from 50 to 1200 mm in die-cast size. We can provide diffused heaters that fit various sizes for vaporized oil diffusion vacuum pump manufacturers not only in Japan but also worldwide, so if you specify the size, design specifications, bolt fastening patterns, etc., we can offer them as OEM products.

• others

22 types of connection termination styles

• others

High watt cartridge heater. The millimeter sizes are standard stock from the manufacturer.

• others

1. This is a high-watt density band heater of the NHW (stainless steel insulated lead wire type) and NHL (fiberglass insulated lead wire type). MAX temperature: 450°C, recommended watt density: 8.5W/cm² or less. 2. We maintain a wide range of standard products with a minimum inner diameter of 22mm to a maximum inner diameter of 70mm as manufacturer standard stock. 3. The tightening band screw part has a compact design, allowing for a smaller mold engraving size. 4. Custom sizes can also be manufactured, so please contact us.

• others

It is optimal as a band heater for hot runner nozzles of multi-cavity precision molds. The heating element is wound in a coil shape for direct heating, resulting in no heating unevenness. It heats up quickly and is highly resistant to impact. The inner diameter can accommodate up to 63.50mm.

• others

Due to new materials such as engineering plastics and thixotropic materials, increasingly high temperature management is required for mold temperatures. If it's high wattage, it is indeed the Watlow Corporation from around the world. Watlow's cartridge heaters are distributed globally with unique model numbers.

• others

Side pull type Vertical pull type Rivet type High adhesion type

• others

Compared to band heaters, it has a longer lifespan at high temperatures and excellent insulation properties. Since it makes surface contact with the heated object, the thermal efficiency is significantly improved. There are four types of sheath cross-sections: 4.1 square, 3.5 square, 2.5x4.0 rectangular, and 2x3 rectangular. The connection part with the lead wire is a non-heating section, making it less likely to experience disconnection. It is also possible to incorporate a thermocouple (J or K).

• others

We manufacture and deliver aluminum cast heaters considering watt density and thermal efficiency in a short lead time. Please place your order using the quotation request form or order form on the back. We also accept custom specifications (shape and size), so please specify with drawings, etc.

• others

Features: Simple and compact, and strong against resin coating. Can achieve high wattage. Has minimal heat unevenness. Excellent corrosion resistance and low adhesion to the heated object. Can also accommodate export use (rated 240V). Types: There are FS type and FL type. Please refer to the details below. - Complete tubular thermocouple included. - Complete tubular thermocouple not included.

• others

- It is a flexible heater that can be easily bent with hand strength. - It has a higher thermal efficiency compared to cartridge heaters and offers excellent temperature distribution in the manifold. - No inorganic hardener is required for fixing the heater. - It is a product with lower power consumption compared to other materials.

• others

Thermocouples are available in a wide variety of sheath materials and terminal types. Custom specifications can also be produced. The types of temperature sensors commonly used for mold applications include Type J (IC) and Type K (CA). The identification of Type J and Type K is distinguished by the color of the stainless steel shield terminal tube. Type J is (yellow), and Type K is (blue). We also offer a dedicated temperature controller for JTD to control the temperature. We standardize 2-point, 4-point, 6-point, and 8-point configurations (custom options are also available). Dedicated for Type J / dedicated for Type K. We can manufacture according to orders beyond standard specifications. Compatible with J and K dual-use types.

• others

- With excellent flexibility, it can be bent into free shapes and can be installed in narrow spaces or complex shapes. - We will manufacture it to your desired length (depending on the desired sheath length, number of bolts, wattage, and quantity). - When requesting a quote, please specify the sheath diameter, sheath length, number of bolts, wattage, quantity, lead wire length, and operating temperature in advance.

• others

It is possible to connect to the hose quickly and easily without using a hose clip.

• others

Insulation boards are used for various applications such as plastic, rubber, and die-casting molds. We will deliver insulation boards processed to your desired shape and tolerances, not only from domestic manufacturers but also from overseas manufacturers. Please send the processing drawings for the insulation boards via FAX or CAD data. We will deliver them in a short lead time and at a low price.

• others

* Protects products from corrosion and safeguards them from damage and scratches during shipping and transportation for a long period. * As it is a completely waterproof product, it completely shuts out the penetration of water and other substances. * The color of the seal peel agent comes in a transparent type that allows for immediate identification of the contents of the sealed product, as well as a color type that protects the important industrial design of the company.

• others

It can be hung without difficulty to rotate in two directions.

• Sports related facilities

There are various types, including ceiling-mounted and side-mounted types.

• Hoist/Crane
• Work tools
• others

The freno link bolt can rotate freely 180 degrees relative to the mounting surface and 360 degrees relative to the mounting axis. Therefore, after tightening the bolt to the specified torque on the object, it can be safely lifted from any direction. This is an all-direction type, ultimate eye bolt that can be used with confidence even for lifting heavy objects that come with risks, unlike conventional eye bolts.

• Hoist/Crane
• Crane and others
• others

Anchor point Keyed eye point Anchor point Keyed eye point

• Hoist/Crane
• Bridge Construction
• Crane and others

There are various methods to measure gaps, but this plastigage uses a material with very good stretch properties, allowing it to accurately measure gaps in unseen areas, including three-dimensional curved surfaces, based on the width it expands to when compressed.

• Other measuring instruments
• stone

- It is a slender, thread-like object with a total length of approximately 100mm. - The measurement range for the added gaps comes in three types, making a total of six variations. - The material is a petroleum-based resin, similar to conventional plastigauge.

• Other measuring instruments

Products with excellent rubber materials, insulation, and vibration damping.

• others

Outstanding Features ● It allows for easy testing of the cavity and gate quality of molds without attaching them to a molding machine. ● The mold testing machine uses a special wax, enabling quick molding tests of the mold. The special wax can be reused. ● The mold testing machine is lightweight and has a simple structure, making it easy to use. ● The special wax is crushed and placed inside the cylinder, melted with a built-in heater, and then injected and molded by applying air pressure through the nozzle at the tip of the testing machine against the mold.

• others