トーニック List of Products and Services

The "Attachment Type Wind Speed Probe QB Series" is a small, attachment-type horizontal omnidirectional probe that is smaller than electronic components on a circuit board. It is used in conjunction with our anemometer to measure wind speed and temperature in the "gaps" during product development of electronic devices and other products. It offers high precision with an accuracy of ±3% of the indicated value in the range of wind speeds from 0.1 m/s to 10 m/s or 0.3 m/s to 30 m/s. It excels in performance evaluation of production equipment and automotive parts, as well as in the analysis and verification of thermal measures, heat dissipation, and cooling methods. 【Features】 ■ The wind speed sensor is encapsulated in a φ2.5mm aluminum sphere with single crystal germanium, achieving a minimum height of 5mm, making it ultra-compact. ■ The anemometer is available in a 1-channel type, a 4-channel simultaneous measurement type, and a multi-channel type with 16 channels in one unit. ■ The probe cable length is 3m (extension cable available). ■ The attachment method allows for easy installation using double-sided tape or similar materials. *For more details, please refer to the catalog or feel free to contact us.

• Anemometer

The duct meter "DMS-N1A" is a wind speed and temperature detection system that installs wind speed and temperature probes in factory supply and exhaust ducts and equipment, allowing for monitoring of airflow through an indicator and enabling analog output of airflow values. Traditionally, operators would visit measurement points to measure and record wind speeds at various locations, but the "DMS-N1A" can continuously measure airflow 24 hours a day, 365 days a year. There are also wind speed and temperature probes with chemical resistance that can monitor exhaust airflow in semiconductor factories, pharmaceutical factories, and research facilities for extended periods. 【Features】 ■ Wind speed detection range: 0.1 m/s to 15 m/s; temperature range for wind speed detection: -10°C to 50°C ■ Easy to set airflow scale, cross-sectional area, units, etc.! ■ Wind speed and temperature sensors are compatible and easy to maintain. *For more details, please download the catalog or feel free to contact us.

• Anemometer

You can simultaneously measure the temperature and wind speed of airflow in indoor and factory spaces. The TempPlan ultra-multi-channel data logging system allows for the connection of hundreds of temperature sensors with a single input signal cable, enabling reduced wiring compared to thermocouple types, and it also offers better noise resistance compared to analog signals. Wind speed measurement can be performed using the ultra-compact adhesive wind speed and temperature probe, allowing for detailed wind speed distribution measurements with the GeZ200 series multi-point wind speed measurement system. The measured wind speed and temperature data can be visualized in 3D space display software, enabling not only numerical data but also 2D (surface distribution) and 3D (spatial distribution) displays on a PC. By visualizing the temperature and wind speed in the space, time-saving effects for analysis and evaluation reports can be achieved. 【Features】 ■ Simultaneous measurement of temperature and wind speed of airflow in space ■ Connection of hundreds of temperature sensors with a single input signal cable ■ Time-saving effects for analysis and evaluation reports *For more details, please download the materials or contact us.

• Air conditioning
• Anemometer

A high-temperature type of ultra-compact adhesive wind speed and temperature probe has arrived. It is a multi-point wind speed measurement system that will be very helpful for measuring wind speed distribution in engine compartments and analyzing the cooling effects of fans in electronic devices! It is suitable for thermal design, cooling effect analysis, and validating simulation results! 【Features】 ● Capable of measuring wind speeds up to 30 m/s within a temperature range of 0°C to 120°C ● Supports simultaneous multi-point wind speed distribution measurement with 16 channels *For more details, please contact us or refer to the catalog.

• Analysis and prediction system
• Anemometer
• Other measuring instruments

This catalog is published by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. It features duct-mounted airflow detectors such as the "DMS-N1/NH1," as well as wind speed and airflow detectors like the "DME-1" and "dMS-5SFT." [Featured Products] ■ Duct-mounted airflow detectors ■ Duct-mounted wind speed and temperature detectors ■ Wind speed and airflow sensors for air conditioning ducts ■ Wind speed switches ■ Multi-point wind speed measurement systems for research and development *For more details, please refer to the PDF document or feel free to contact us.

• Anemometer

The DMS-N1 series duct meter is a wind speed and temperature probe installed in factory supply and exhaust ducts and equipment, allowing for monitoring of air volume via an indicator and enabling analog output of air volume values. Traditionally, handheld anemometers were used, requiring operators to go to measurement points, insert wind speed probes into ducts, measure wind speeds at various points, record them, and calculate air volume. However, the DMS-N1 is an air volume detector that can continuously measure air volume 24 hours a day, 365 days a year. In addition to sensors for general air, there are also wind speed and temperature probes with chemical resistance that can monitor exhaust air volume in semiconductor factories, pharmaceutical factories, and research facilities over extended periods.

• Anemometer

This is a thermal air velocity detection switch that detects the airflow inside ducts and equipment, and turns the relay contacts ON/OFF when the set wind speed is detected. Since it can be permanently installed in the duct, stable wind speed and airflow can always be obtained. Additionally, due to its relay output, automatic control of fans and dampers can be easily achieved by connecting it to control devices such as PLCs.

• Ventilation system

The "MONITOR-N" is an analog wind speed and temperature converter that outputs a non-linear voltage of DC 1.0V to 9.5V for wind speeds of 0 to 30 m/s and DC 0.8V to 9.0V for wind temperatures of 0 to 50°C. By programming the conversion formulas into a data logger, wind speed measurements can be easily conducted. Weighing 390g, it is compact and lightweight, as well as low-cost. This product can be used in combination with a wind speed and temperature probe. 【Features】 ■ Select one of three wind speed ranges according to the measurement target's wind speed range ■ Easy wind speed measurement ■ Low cost ■ Compact and lightweight ■ An optional power supply unit "MON-15V" is available to convert AC 100V to DC ±15V *For more details, please feel free to contact us.

• Anemometer

Introducing the "High-Temperature Multi-Point Anemometer / Ultra-Compact Adhesive Anemometer and Temperature Probe" handled by Tonic, which manufactures and sells anemometers, air volume meters, and wind speed sensors. We have made it possible to perform thermal design, cooling effect analysis, simulation result verification, and wind speed distribution measurement in narrow gaps, which we previously thought was impossible. Using the high-temperature adhesive anemometer and temperature probe, we offer a high-temperature multi-point anemometer measurement system "PtY-160DA" capable of simultaneous measurement of up to 16 channels, along with models such as "PtY-10DA/40DA." 【Features】 <PtY-160DA> ■ Capable of simultaneous measurement of up to 16 channels ■ Wide measurement range: wind speed from 0.2 to 30 m/s, wind temperature from 0 to 120℃ ■ Equipped with an RS232C port on the main unit ■ Wind speed and temperature for specified channels can be displayed on the main unit ■ By using monitoring software for multi-point anemometers, monitoring and logging on a PC is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system
• Anemometer
• Other measuring instruments

In the Tonic anemometer, a semiconductor germanium is used for the wind speed sensor. Unlike metals, semiconductors experience a sharp decrease in electrical resistance as temperature rises. Utilizing this characteristic, Tonic has applied it in the design of its wind speed sensor. The anemometer catalog introduces various products, including adhesive-type wind speed and temperature probes, support rod-type wind speed and temperature probes, multi-point wind speed and temperature measurement systems, and digital wind speed and temperature meters. For more details, please contact us or download the catalog.

• Anemometer

Rectifying grid and short duct with mesh, combined with the Tonic multi-point wind speed measurement system, enables airflow measurement in accordance with JIS8330 "Testing and Inspection Methods for Fans." The "GeZ-200D/DA" system allows for multi-point measurement of wind speed and temperature, with up to 16 channels per output unit. This system is useful for experiments and analyses that require more accurate airflow measurements. Please feel free to inquire about duct sizes and types. 【Features】 ■ Reliable design considering maintenance ■ Wind speed measurement range: selectable from two ranges, 0.1m/s to 10m/s and 0.3m/s to 30m/s ■ Wind speed measurement temperature range: 0℃ to 50℃ (must not condense) ■ Measurement target: clean airflow (general air) ■ Maximum number of wind speed measurement points: 256 points *For more details, please feel free to contact us.

• Air compressors, blowers and pumps
• Analysis and prediction system
• Anemometer

The "Thermal Type Ultra-Compact Adhesive Wind Speed and Temperature Probe" is highly accurate, with a measurement range of 0.1 to 10 m/s or 0.3 to 30 m/s, providing an indication value of ±3% ±0.1 m/s when used with the Tonic anemometer. Each probe can be attached to the measurement point using tape on its base. No mounting fixtures are required. Additionally, the "QB-5" has a height of just 5 mm from the base, making it suitable for verifying airflow and wind speed distribution within equipment enclosures. When combined with a multi-point wind speed measurement and output unit, it can accurately measure wind speed distribution at up to 256 points. 【Features】 ■ Thermal type ultra-compact ■ High precision ■ No mounting fixtures required ■ Multi-channel anemometers also available *For more details, please refer to the PDF document or feel free to contact us.

• Anemometer

Introducing the "High-Temperature Anemometer/Adhesive Type Wind Speed and Temperature Probe" handled by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. We have made it possible to conduct thermal cooling analysis and simulation verification that we thought were impossible, as well as measure wind speed distribution in narrow gaps. Using the adhesive type wind speed and temperature probe, we offer a lineup including the high-temperature digital 4-channel anemometer "PtY-40DA," which allows simultaneous measurements of up to 4 channels, as well as the "PtY-10DA." 【Features】 ＜PtY-40DA＞ ■ Allows simultaneous measurement of up to 4 channels ■ Wide measurement range: wind speed from 0.2 to 30 m/s, wind temperature from 0 to 120℃ ■ Equipped with an RS232C port on the main unit ■ With multi-point wind speed measurement software, monitoring and logging on a PC is also possible ■ Measurement values can be saved as text files *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system
• Anemometer
• Other measuring instruments

A new cut-base type has been introduced for the ultra-compact adhesive wind speed and temperature probe "QB Series." The base of Φ7mm (QB-5) has been made even smaller, now featuring an oval base measuring 4mm in width and 5.5mm in length. With the calibration of the conventional anemometer body, high-precision wind speed measurements are possible. This can be used for various applications, including wind speed measurements in narrow spaces that were previously deemed impossible, multi-point wind speed distribution measurements, and thermal cooling analysis in product development. 【Features】 ■ Ultra-compact ■ Cut-base type ■ High-precision wind speed measurement possible ■ Usable for various applications *For more details, please refer to the PDF document or feel free to contact us.

• Anemometer

● The wind speed distribution of the air passing through the radiator and the wind speed distribution inside the engine room can be measured at up to 256 points. The wind speed measurement range is from 0.2 m/s to 30 m/s, measured with sensors and a multi-point wind speed output unit. (Temperature range is from 0°C to 120°C) ● The sensor unit can accommodate a thermal wind speed sensor and a wind temperature sensor in a stainless steel case. It can also be easily installed at measurement points within the engine room. ● Due to the placement of ultra-compact wind speed and wind temperature sensors, the resistance is lower compared to conventional propeller types, allowing for the measurement of the wind speed and temperature distribution of the airflow passing over the radiator surface. Additionally, our products are manufactured and calibrated domestically (in-house), enabling us to respond quickly to maintenance such as repairs and recalibrations. ● The calibration of the sensors is performed in our calibration wind tunnel using a well-established calibration system with traceability, allowing for calibration while the sensors remain in their cases, ensuring high-precision measurements. This is a multi-point wind speed and temperature measurement system with high reliability in reproducibility, designed for the automotive industry. *For more details, please download the materials or contact us.

• Vibration and Sound Level Meter
• Anemometer

This catalog is published by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. It features the omnidirectional probe "QB・QA series," which encloses a semiconductor germanium single crystal in a Φ2.5mm aluminum sphere, as well as anemometers such as "GeZ-200D・GeZ-200DA." Additionally, we introduce the operating principles and calibration systems of Tonic anemometers. 【Featured Products】 ■ Adhesive-type wind speed and temperature probe ■ Support rod-type wind speed and temperature probe ■ Multi-point wind speed and temperature measurement system ■ Digital wind speed and temperature meter ■ Analog wind speed and temperature converter *For more details, please refer to the PDF document or feel free to contact us.

• Anemometer