東栄 List of Products and Services

This is a handy pump that can safely transfer liquid chemicals. The adoption of a sealed motor has expanded its applications. The use of a compact motor has reduced weight, and the adoption of a high-efficiency impeller has achieved high lift.

• pump

■The Grundfos HydroMPC booster system is built according to strict standards. Equipped with the CU351 controller, it can easily and accurately boost pressure even under the most demanding conditions. ■All components are carefully selected with a focus on quality and efficiency. The Grundfos HydroMPC booster system is a compact unit designed for durability and long life, with easy access to service parts. ■The Grundfos HydroMPC booster system can be used for any application requiring pressure boosting. Each booster model is designed to meet the specific capacity and control requirements of the customer. ■The intelligent cascade control device operates the optimal number of pumps as needed. Together with CR pumps equipped with IE3 motors, HydroMPC provides a solution that maintains constant pressure in situations where flow rates vary, in the most energy-efficient manner.

• pump

The MTB series is a single-stage vortex coolant pump designed for transporting dirty liquids containing solid materials such as chips. It features a semi-open impeller that is resistant to chips and foreign objects, allowing for the transport of liquids containing solid materials up to approximately 20mm. It is particularly suitable for use in high flow rate applications, such as centralized filtration systems.

• pump

The MTD immersion-type multi-stage coolant pump for dirty liquids is an ideal product for transferring dirty liquids generated during the machining process of machine tools to a filtration system. It features a semi-open impeller that can transport dirty liquids containing foreign substances such as solids, chips, and shavings, with a maximum size of up to 25mm.

• pump

The high-pressure coolant pump MTS is a self-priming screw pump consisting of a three-axis spindle made up of a drive screw and an idler screw. The screws are treated with ion plating (PVD), and the housing undergoes special hardening treatment to achieve a high surface hardness of 1200HV, preventing wear and damage from particles such as chips. With a screw type and equipped with a pressure compensation bushing, it enables stable discharge without pulsation, allowing for quiet operation.

• pump

The immersion-type coolant pump MTR can be used for circulating coolant liquids in various machine tools, circulating cleaning liquids in cleaning devices, and for various filtration devices. It is designed to be installed directly on the tank, with the pump section immersed in the liquid used in the tank. A wide range of flow rates and pressures, as well as immersion lengths, can be selected due to the rich combination of pump sizes and impeller stages.

• pump

The high-pressure booster module can be used for applications such as pressurization, liquid transport, and circulation within systems under high static pressure. It is adopted in reverse osmosis systems for household water supply, hospitals, laboratories, the chemical industry, the electronics industry, and the metal industry. It can also be used in the chemical industry, zinc plating industry, painting factories, as well as in the metal and mineral industries.

• pump

■ By installing two vertical multistage centrifugal pumps in series and adopting a special motor for reverse thrust, we have achieved a high pressure of 4.4 MPa, which has traditionally been difficult with centrifugal pumps. ■ This is an ideal high-pressure pump that simultaneously solves issues commonly associated with plunger pumps, such as noise problems, equipment fatigue due to pulsation, and high maintenance costs due to the short lifespan of key components.

• pump

■ The UPS pump has a circulator pump with three speeds (50Hz and 60Hz). ■ These pumps can be used in both open and closed systems. The pump and motor form an integrated unit with two gaskets instead of a shaft seal, and they are of the canned rotor type. Additionally, the bearings are lubricated by the conveyed liquid. ■ Designed for liquid circulation in heating and air conditioning systems. Pumps with copper or stainless steel housings can also be used in hot water service systems.

• pump

■CE marking compliant (Type 04,01B). ■Continuous operation possible at the set pressure. ■Blade replacement is easy (compared to KHA series). ■High operating vacuum level, ideal for replacing ejectors and for automatic machines (such as assembly machines) for small components like electronic parts.

• Air compressors, blowers and pumps

■Continuous operation is possible at a pressure of 8 kPa or lower. ■The operating vacuum level is high, making it ideal for automatic machines for small components such as electronic parts (e.g., mounting machines).

• Air compressors, blowers and pumps

■Can be used continuously under conditions of an absolute pressure of 1.3 kPa or lower, making it ideal for various industries that require high vacuum. ■It is a compact type directly connected to the motor flange. ■It operates quietly and has a long lifespan.

• Air compressors, blowers and pumps

■Safe design, environmentally friendly, CE marking compliant. ■Low operating noise, with a noise reduction of 3dB (compared to conventional models) due to quiet design. ■30% longer lifespan due to the adoption of new material blades (compared to conventional models). ■Compliant with RoHS directive.

• Air compressors, blowers and pumps

■The 2-cylinder 2-function (vacuum pump and blower in parallel) system allows for independent use as a vacuum source with a vacuum level of 60 kPa or lower and an air source with an exhaust pressure of 60 kPa or lower simultaneously. ■Compared to conventional combination pumps, it is compact and lightweight (compared to our products). ■Additionally, it is easy to handle.

• Air compressors, blowers and pumps

■Enhanced product lineup through packaging series. We have prepared 19 models with various combinations such as vacuum-blower, vacuum-vacuum, and blower-blower. ■Achieved low operating noise. Reduced by 3 to 5 dB compared to our conventional models. ■Equipped with proven standard pumps, improving maintainability.

• Air compressors, blowers and pumps

■Safe design, environmentally friendly, CE marking compliant. ■Low operating noise, with a noise reduction of 3dB (compared to conventional models) due to quiet design. ■10% increase in lifespan due to the adoption of new material blades (compared to conventional models). ■Compliant with RoHS directive.

• Air compressors, blowers and pumps

■Adopts a free rotor system that does not require side adjustments. ■Easy maintenance. ■Oil-free operation, so it does not contaminate the work environment or products with oil. ■Can be directly connected to rubber or vinyl hoses.

• Air compressors, blowers and pumps

■Safe design, environmentally friendly, CE marking compliant. ■Low operating noise, reduction of 2-5 dB (compared to conventional models) due to quiet design. ■20% increase in lifespan (compared to conventional models) due to the adoption of new material blades. ■Compliant with RoHS directive standards.

• Air compressors, blowers and pumps

■ Measurement/display of dew point (at atmospheric pressure) and temperature for refrigerated air dryers (digital display of conventional refrigerant pressure and compressed air cooling temperature). ■ Standard analog output equipped (single output). ■ Slim and compact (62% volume ratio of MG40A-P). ■ External communication function allows management of up to 8 units via PC (optional feature).

• Other measuring instruments

【MG40 (For atmospheric pressure air only)】 - Simultaneous display of temperature, humidity/dew point (humidity/dew point can be switched). - Dew point/humidity alarm output standard equipment (with two non-voltage contacts). - Standard equipment for analog outputs (temperature, humidity/dew point: DC output). 【MG40A-P (For compressed air only)】 - Simultaneous display of temperature, humidity/dew point (humidity/dew point can be switched). - Dew point/humidity alarm output standard equipment (with two non-voltage contacts). - Standard equipment for analog outputs (temperature, humidity/dew point: DC output).

• Other measuring instruments

■Ideal for heatless dryers. ■Adopts a wide-pitch condenser that is easy to maintain.

• others

■Ideal for 11 to 150 kW air compressors. ■Adopts a wide-pitch condenser that is easy to maintain. ■Uses wave-shaped fins. The thin heat exchanger with excellent heat transfer efficiency has a large air contact area, demonstrating outstanding cooling capability. ■Special fan adopted to minimize air flow unevenness.

• others

【Timer Type Drain Trap: ADE4B】 - The discharge interval can be set with a variable timer. - Equipped with an energy-saving function that automatically controls the discharge interval based on ambient temperature detection. - Significantly reduces clogging of sludge and other materials by adopting a large-diameter orifice solenoid valve. - Equipped with a freeze prevention function that automatically shortens the discharge interval during low temperatures. 【Electromagnetic Drain Trap: ADE300】 - Equipped with a capacitive liquid level sensor. - Prevents clogging of foreign objects by adopting a large-diameter orifice solenoid valve. - Remote management is possible (operating signal and alarm signal are standard features).

• Drainage and ventilation equipment

Orion Machine's compressed air filters (compressed air purifiers) allow you to choose from various filters tailored to different removal levels for water droplets, solids, oil mist, odors, and more in compressed air.

• others

■Achieves high cleanliness of compressed air. ■Capable of precise filtration at 0.5μm. ■Casing finished with SUS polishing, elements made of PTFE membrane or fiberglass. ■Standard equipped with an outlet particle measurement port.

• others

Orion Machine's compressed air filters (compressed air purifiers) allow you to choose from various filters tailored to different removal levels for water droplets, solids, oil mist, odors, and more in compressed air.

• others

■ Significant energy savings achieved through energy-saving dew point sensors. ■ Digital dew point monitor enables dew point monitoring and further energy savings. ■ Energy-saving control possible with any dew point setting from -60 to 0°C (under pressure) (dew point display accuracy: -60°C to +20°C ±3°C). ■ Equipped with a digital dew point monitor. ■ Standard features include dew point alarm output (with two voltage-free contacts and standby sequence) and analog output (DC 1-5V (-80 to +20°C)). ■ Remote monitoring of compressed air quality and dew point is possible.

• others

- Standard adoption of stainless steel containers for the first time in the class (400-1 and above). - Standard adoption of clamp joint method (400-1 to 2000-1). The adoption of a band structure simplifies the housing removal process compared to the conventional flange method. - By adopting a newly developed element, the normal pressure loss value is reduced to 0.02 MPa (a 33% reduction compared to our conventional products). - The timing for element replacement is indicated by a lamp (400-1 and above). Element life indicator adopted. - Expanded pressure range (75B to 250B). - Tie rod connection (75B to 250B). - Diameter selection available (400, 1000).

• others

The SQE3-inch submersible pump allows you to choose a model that meets your individual requirements across a wide range of performance. It is a compactly designed 3-inch multi-stage centrifugal pump that can be installed in boreholes smaller than the pump dimensions. The SQE pump has built-in electronic components, making installation and operation very easy, and we promise reliable and stable water supply. The pump, equipped with a permanent magnet motor, features a flexible and compact design that ensures excellent efficiency and can handle lift heights of up to 200 meters. By using the "SQEP," which combines the SQE pump with a surface control unit, constant pressure water supply is possible.

• pump

■ Energy-saving mode switch for dew point temperature. In addition to a dew point of 10°C under pressure, 18°C is also selectable. This allows for significant energy savings during high-temperature periods. Additionally, it is possible to prevent condensation caused by the difference in outdoor temperature. A function has been added to automatically change the dew point setting under pressure in conjunction with the outdoor temperature (for models RAXE4900 and above). ■ Achieves up to 60% energy savings. Through the unique development of "frequency PID control of the inverter compressor" and "continuous PID control of the electronic expansion valve for optimizing the refrigeration cycle," significant energy savings have been achieved even during normal operation compared to the conventional RAX series (CCV control). Furthermore, when the dew point under pressure is set to 18°C, up to 60% energy savings are possible (RAXE4900 model achieves up to 53%). ■ Responds to low-pressure needs (based on 0.54MPa). In response to low-pressure needs, the design standard pressure has been changed from 0.69MPa to 0.54MPa. There is no need for a rank upgrade in model selection at low pressure (for models RAXE2300 to 4900). ■ Continuous operation possible even under high load. Thanks to unique control, continuous operation is maintained even during unexpected high loads, making it difficult to stop before safety devices activate through self-protection control. ■ Inverter control allows for the same capacity at 50Hz and 60Hz.

• others

■Equipped with a digital control compressor for energy saving. Energy-saving operation that follows load fluctuations (up to 68% energy savings). Energy-saving operation through manual and automatic changes of the dew point setting (linked to outside temperature) (10℃ to 18℃). ■High inlet temperature compatible type (inlet air temperature 5℃ to 80℃). ■Optimized design Avoids alarm shutdown during high load operation in summer as much as possible through self-protection/control. Reduces exhaust heat in energy-saving operation. *Custom SUS pipes are also available to improve corrosion resistance.

• others

■Realization of energy-saving operation with DC inverter control. Achieves energy-saving operation (up to 65%) that follows load fluctuations with the industry's first DC inverter compressor control. ■Safe and secure design with additional features. 1. Design that accommodates increased airflow for air compressors. 2. Automatic switching function linked to ambient temperature and dew point. 3. Optimization automatic control and ability to check operating status. 4. Designed to be less prone to tripping even under high load in summer. 5. Condenser exhaust directed upwards. 6. Drain discharge can be changed to the left side or rear. 7. Corrosion-resistant heat exchanger (using stainless steel shell and nickel-plated copper pipes). *Custom SUS pipes are available to improve corrosion resistance. ■Environmental compliance Compliant with RoHS directive.

• others

■Stainless steel shell heat exchanger. We have adopted a stainless steel shell heat exchanger that matches the oil-free era of clean air and compressed air. *Custom SUS pipes are also available to enhance corrosion resistance.

• Drainage and ventilation equipment

■High-temperature environment compatible. Operable even at an ambient temperature of 45°C. (RAX55J-SE to 75J-SE is compatible with 48°C) ■Stainless steel shell heat exchanger. Adopts a stainless steel shell heat exchanger that matches the oil-free era of clean air and compressed air. *Please inquire separately for degreasing treatment. *Custom SUS pipes are available to enhance corrosion resistance. ■Achieves low pressure loss of 0.015MPa or less (RAX75J-SE). This heat exchanger has minimal clogging even with long-term use and low pressure loss (pressure drop). ■Exempt from Category II pressure vessel regulations. As it is exempt from Category II pressure vessel regulations, no certification procedures are required. ■Standard equipped with suction filter (RAX3J-SE to 75J-SE). A filter is standardly equipped at the suction inlet of the condenser, making maintenance easier. ■Space-saving and compact (RAX55J-SE to 75J-SE). Front suction and top exhaust. Can be closely installed on either the left or right side. Drain trap position can be chosen on either side (optional parts required for right-side extraction). Wall-mounted installation is possible on left and right walls as well as the back.

• others

■Stainless steel shell heat exchanger. We have adopted a stainless steel shell heat exchanger that matches the oil-free era of clean air and compressed air (RAX75J–190J-W is not subject to Category II pressure vessels). *For degreasing treatment, please contact us separately. *Custom SUS pipes are available to enhance corrosion resistance. 【RAX75J〜190J-W】 ■Air dryer that is hard to stop. Compatible with ambient temperatures up to 48°C. ■Increased processing air volume. ■Space-saving and compact. Volume ratio and installation area ratio reduced by 30% (compared to conventional models). 【RAX240F〜450F-WE】 ■Energy-saving achieved through control of the number of refrigeration compressors. Depending on the processing air load, the refrigeration circuit automatically selects between single circuit operation (50%) and dual circuit operation (100%). Up to 50% savings on electricity costs are possible. (Energy-saving type) ■Achieves low pressure loss of 0.01 MPa or less. The heat exchanger has minimal clogging even after long-term use, resulting in low pressure loss (pressure drop). (RAX240F, 240F-W) ■Easy maintenance and installation layout. The exhaust duct attachment point is located at the top of the main unit, eliminating wasted floor space (air-cooled). Major parts can be maintained and inspected from the front.

• others

■High-temperature environment compatibility. Operable even at an ambient temperature of 45°C. ■Stainless steel shell heat exchanger. Adopts a stainless steel shell heat exchanger that matches the oil-free era of clean air and compressed air. *Please inquire separately for degreasing treatment. ■Standard equipped with an intake filter. A filter is standardly equipped at the intake of the condenser.

• others

■ Achieves high-precision control. Thanks to the responsiveness of electronic cooling and our unique high-precision controller, precise temperature control is possible. ■ Low vibration, low noise. Unlike refrigeration methods with compressors, electronic refrigeration using Peltier elements generates very little vibration in the power unit, minimizing the impact of vibration and noise on positioning accuracy in microfabrication. ■ Controls air temperature to ±0.01℃. ■ Compact design realizes space-saving.

• others

■Realization of high-precision temperature control and high water pressure resistance heat exchangers, with a control accuracy of ±0.1℃ and a water pressure resistance structure of 0.3MPa. ■Direct temperature control of chemical solutions. ■Compact design, the lightest in the industry, utilizing a dedicated switching power supply.

• others

- Equipped with export compressed air pressure and flow adjustment functions (built-in regulator and flow meter). - Energy-saving type with unique air mixing temperature control (patented). - Adjustable from -30℃ to 0℃. - Includes main cooling and auxiliary cooling operation switching function. - Standard equipped with casters. - Compact and space-saving design. - Heatless air dryer, line filter, and mist filter are integrated into a compact body. (APX-15A-500)

• others

■Realization of ultra-energy saving and high-precision control through heat pump balance control (up to 80% energy saving, temperature control accuracy ±0.05℃). ■Heaterless water temperature control range compatible with a wide range (PEC400B1-VW: 10℃ to 60℃). ■Multi-functional and highly operable controller section. ■Space-saving design. Heat exchanger (cooling unit), water tank, and pump are built into the main unit.

• others

■Achieves up to 60% energy savings with Peltier temperature control and constant current control (linear PID control of current value). ■Space-saving design: heat exchanger, water tank, and pump are built into the main unit. ■Custom options available for ±0.01℃ precision. ■Electronic cooling and heating temperature control device / water-cooled / built-in water tank.

• others

■Improved corrosion resistance through cation electrodeposition coating of the evaporator ■Adoption of a versatile single-phase 100V power supply (RFB500F) ■Slim and compact design with casters for easy movement to desired dehumidifying locations ■A wide range of options available ■Series includes types suitable for high-temperature environments (up to 45°C) for drying

• others

■ Lightweight, space-saving, and energy-efficient without a power supply. The main unit requires no power and weighs only 10kg (for ODF5-W1). Achieves zero floor installation area with wall mounting. Running cost is 6.3 yen/L. ■ Uses an element-based system for consumable replacements. Easy and reliable for anyone. Element replacement time is 6 minutes. Can be replaced during lunch breaks. ■ Various usage options. For equipment with low operating frequency. As a "pre" drain processing unit for existing equipment.

• others

- Standard equipment now includes a stainless steel container (over 400). - Newly developed "fiber-like activated carbon" adopted. - Significantly reduced the outflow of activated carbon particles to the secondary side compared to conventional granular activated carbon. - Reduced outlet oil concentration to 0.003 wtppm. By adopting the newly developed element and combining it with line filters and mist filters, the outlet oil concentration is significantly reduced, providing cleaner air. - Expanded pressure range (150B to 250B). - Tie rod connection (150B to 250B). - Diameter options available (400, 1000).

• others

【Motor Valve Type Drain Trap: ADE-2-B/3-B】 ■ Automatically discharges drain with water detection sensor. ■ Discharge cycle time can be set with variable timer (ADE-3-B). 【Float Type Drain Trap: FD2/2-NC/5/6-G3/10-A】 ■ Discharges drain without air loss (FD2・5・6・10-A). 【Disc Type Drain Trap: AD-5-G1】 ■ Discharge interval is variable.

• Drainage and ventilation equipment