東栄 List of Products and Services

■ Achieves temperature control accuracy of ±0.1℃ with electronic expansion valve control. ■ Standard equipped with a high-lift pump (over 30m) *RKS750G will be 20m at 50Hz. ■ Compact ■ Easy operation Operating the chiller is as simple as pressing the operation switch. The circuit breaker is conveniently located on the front for easy ON/OFF of the main power. When an alarm occurs, it can be cleared by pressing the reset switch. The alarm content is displayed with an error code during an alarm event, ensuring peace of mind. Additionally, it retains a history of the last 6 alarm occurrences, which helps in troubleshooting. The pump can also operate independently, allowing for water circulation even if the refrigeration unit fails. Settings for local and remote operation are possible. ■ Gold-plated exterior Durable sheet metal exterior designed to withstand long-term use. ■ Adoption of frame structure Robust structure with rigidity provided by the frame. ■ Large capacity water tank The water tank has a large capacity of 10L, designed to be resistant to changes in liquid temperature. ■ Operable and checkable via computer Items that can be operated via computer: individually operate and stop the chiller unit, individually control the chiller's water supply pump, individually set the chiller's liquid temperature.

• others

■ Contributes to improved processing accuracy and quality of the equipment with high-precision temperature control of ±0.1℃ using an electronic expansion valve. ■ The standard high-pressure pump, driven by an inverter, ensures consistent performance even in regions with different frequencies, providing peace of mind. ■ Wide operating ambient temperature range of 5 to 45℃. ■ Wide operating liquid temperature range of 5 to 40℃. ■ Simple and reliable design with a controller and comprehensive features. Easy operation with just a push of the operation switch. Alarm content is displayed with error codes, allowing for quick recovery. ■ Large-capacity tank with a large-diameter water supply port. The Φ100mm large-diameter water supply port makes cleaning the tank easy! Additionally, the large capacity reduces the frequency of dry water errors and the number of water replenishment tasks, while minimizing temperature fluctuations during load variations. Equipped with a blue LED water level indicator for easy monitoring of the water level in the tank! ■ Easy filter cleaning. The condenser is equipped with a standard filter to prevent clogging! The filter can be easily removed without tools. Direct cleaning of the filter makes it easy to remove contaminants, contributing to reduced labor and stable operating performance of the chiller. ■ A variety of application functions tailored to your usage needs are available. You can choose from various options to suit different scenarios.

• others

We handle research plastic products manufactured by Tharson's. The "stirring bars" come in various types, including the common pivot ring type and various deformed types. The pivot ring type is available in 15 different sizes with varying diameters and lengths, allowing you to choose according to your container and capacity. Manufactured with reliable molding technology and high-quality resin, they contribute stably to various research and analysis. 【Features】 - Available in common pivot ring types and various deformed types - 15 different sizes with varying diameters and lengths - Choose according to your container and capacity - Manufactured with reliable molding technology and high-quality resin *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle research plastic products manufactured by Tarsons. The "slide staining related equipment" includes various products such as staining boxes, microscope slide boxes, and racks. The "slide storage rack" is engraved with numbers and can hold 100 slides. The spacing between slides is designed to allow for easy movement, removal, and insertion. Manufactured with reliable molding technology and high-quality resin, it contributes stably to various research and analysis. 【Features (Slide Storage Rack)】 ■ Engraved with numbers, capable of holding 100 slides ■ Ample spacing between slides ■ Transparent lid for easy visibility of contents *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle research plastic products manufactured by Tarsons. The "Petri Dish" is molded from polysulfone resin, and we offer gamma-sterilized dishes (SAL10-6) and SAL10-3 sterilized dishes. You can choose based on the presence or absence of exhaust holes. Due to the reliable molding technology and high-quality resin used in manufacturing, these products contribute stably to various research and analysis. 【Features (Aseptic Petri Dish SAL10-3 Sterilized)】 - Manufactured in a clean room with a non-toxic environment - Sterilized with SAL10-3 - No contamination from foreign substances - No residues from chemicals caused by misreading ETO/Ethylene Oxide - Made of polystyrene compliant with US-FDA-21CFR standards *For more details, please refer to the PDF materials or feel free to contact us.

• others

We handle research plastic products manufactured by Thersons. The "desiccator" is made of polycarbonate and comes in three types, including a vacuum desiccator with a molded stopcock. Each desiccator is available in four sizes: 150, 200, 250, and 300 mm in diameter. Due to its reliable molding technology and high-quality resin, it contributes stably to various research and analysis. 【Features】 ■ Made of thick plastic, lightweight, and easy to handle vacuum desiccator ■ Maintains a vacuum of 29 inches of mercury (98.2 kPa) for 24 hours without using grease ■ The polypropylene three-way cock includes a Teflon plug and has a port compatible with a 6.35 mm inner diameter tube for vacuum suction *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle research plastic products manufactured by Tharsons Company. The "filter" uses polysulfone resin, and all wetted parts are made of resin. We also offer inline filters that allow passage between transfer tubes and various types of manifolds. Due to our reliable molding technology and high-quality resin, we contribute stably to various research and analysis. 【Features】 ■ Uses polysulfone resin ■ All wetted parts are made of resin ■ Inline filters that allow passage between transfer tubes and various types of manifolds are also available ■ Manufactured with reliable molding technology and high-quality resin *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle research plastic products manufactured by Tarsons. The "racks" include racks for microcentrifuge tubes, conical centrifuge tubes, and various test tubes, such as the Combi-Lock rack that can hold different sizes on each face of the cube, and the resin wire-type poly wire rack that can be used in a water bath. Manufactured with reliable molding technology and high-quality resin, they contribute stably to various research and analysis. 【Features (Microtube Rack)】 - Suitable for sample processing and storage in freezers for short to medium periods - Can be stacked or connected - Autoclavable *For more details, please refer to the PDF materials or feel free to contact us.

• others

We handle research plastic products manufactured by Thersons. The "cryopreservation-related equipment" includes a variety of cryovials and various cryoboxes, as well as mini coolers and ice buckets that can temporarily maintain a cold environment, among many other cryopreservation-related products. Manufactured with reliable molding technology and high-quality resins, these products contribute stably to various research and analysis. 【Features (CryoChill Vials)】 - Designed for use in freezers and vapor phase liquid nitrogen - Complies with IATA requirements for lifting without liquid leakage at 95 kPa - Suitable for the transportation of samples *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company handles research plastic products manufactured by Tarsons. The "microcentrifuge tubes and conical centrifuge tubes" are designed with a smooth inner surface to reduce protein adhesion, and all are made using additive-free, pure high-purity polymers. Due to their reliable molding technology and high-quality resins, they contribute stably to various research and analysis applications. 【Features】 ■ Smooth inner surface to reduce protein adhesion ■ Additive-free ■ Made with pure high-purity polymers ■ Manufactured with reliable molding technology and high-quality resins *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle research plastic products manufactured by Tarsons. In our range of "pipette tips," we offer standard micro tips, low-retention tips that have been treated for low adsorption at the molecular level to minimize adsorption loss and dispensing variability, and filter tips that prevent contamination with hydrophobic filters, all produced in a clean room. Manufactured with reliable molding technology and high-quality resin, they contribute stably to various research and analysis. 【Features】 ■ Made of pure, hydrophobic medical-grade polypropylene and can be autoclaved ■ Completely free of lubricants, dyes, and heavy metals ■ DNase, RNase, and pyrogen-free ■ Various tips produced in a clean room are available ■ Manufactured with reliable molding technology and high-quality resin *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle research plastic products manufactured by Thorson Company. We offer a variety of sizes and materials for "beakers, funnels, and flasks." The "beakers" come in PP material, which has excellent chemical resistance, and TPX material, which has high transparency. For "funnels," you can choose from various products, including short stem types and those designed for powders. Manufactured with reliable molding technology and high-quality resins, these products contribute stably to various research and analysis. 【Features】 ■ Available in various sizes and materials ■ PP material with excellent chemical resistance and TPX material with high transparency ■ A wide range of options including short stem types and those for powders ■ Manufactured with reliable molding technology and high-quality resins *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company handles research plastic products manufactured by Thersons. The "cleaning bottle" is widely used for cleaning purposes with various liquids. Among them, the chemical identification cleaning bottle is available in three sizes: 250ml, 500ml, and 1000ml, and it is a user-friendly product that does not leak. Manufactured with reliable molding technology and high-quality resin, it contributes stably to various research and analysis. 【Features】 ■ Widely used for cleaning purposes with various liquids ■ Chemical identification cleaning bottles available in three sizes: 250ml, 500ml, and 1000ml ■ User-friendly with no leakage ■ Manufactured with reliable molding technology and high-quality resin *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company handles research plastic products manufactured by Thersons. "Bottles and large containers" are widely used for the storage and transportation of various liquids, such as chemical solutions and samples. They excel in purity as they do not use additives like plasticizers or release agents. Manufactured with reliable molding technology and high-quality resin, they contribute stably to various research and analysis. 【Features】 ■ Widely used for the storage and transportation of various liquids ■ No additives such as plasticizers or release agents used ■ Manufactured with reliable molding technology and high-quality resin ■ Contributes stably to various research and analysis *For more details, please refer to the PDF document or feel free to contact us.

• others

**Main Features** ■ Sleeve cuff system enabling delicate work The highly elastic latex cuffs fit snugly around the arms, allowing direct insertion into the chamber, significantly improving work precision and efficiency. ■ Oxygen removal in the sleeve before work begins At the start of work, any remaining oxygen in the sleeve is extracted using a foot pedal to ensure anaerobic conditions. ■ Palladium catalyst cartridge that removes even trace amounts of oxygen Any trace oxygen that enters at the start of work is processed through condensation control by reacting with hydrogen in the chamber and palladium to form water vapor. ■ Arm port door ensuring chamber sealing A door that seals the arm port from the inside of the chamber is included for when work is paused. The door has an O-ring that fits tightly against the opening, allowing for the maintenance of anaerobic conditions. ■ Separate culture chamber creating a comfortable workspace The culture chamber, which can be stored at temperatures ranging from room temperature +5°C to 70°C, is separated by a door. This prevents the temperature of the workspace from rising, allowing for comfortable work and stable culture conditions. ■ Airlock allowing safe and ample entry A spacious airlock that can quickly achieve anaerobic conditions via the control panel enables the safe and ample entry of samples and supplies.

• others

The microwave sample decomposition container is a pressure-resistant vessel that combines a metal pressure jacket with a unique slit section and a highly solvent-resistant PFA vial, allowing for the direct irradiation of microwaves to decompose samples in a short time. Additionally, changes in the sample's color, bubbles, and vapor can be observed from the outside through the slit section. Since it can also be used in a household microwave, it significantly reduces the cost and time required for sample decomposition. A 30ml PFA vial from Sabillex is included.

• others

■Save time and costs Unlike water baths, there is no evaporation of water, and there is no risk of dry heating even when the power is on, which also saves warm-up time. You are freed from tedious tasks such as removing water, adding water, replenishing, cleaning, and wiping off water droplets. ■Always clean and contamination-free By keeping the beads dry, there is no concern about microbial growth, and there is no risk of contamination like with water baths. This reduces the need for cleaning the tank and eliminates unnecessary anxiety about contamination. ■Heating possible regardless of container shape Since it uses beads, there is no need to change blocks for each container. Unlike water baths, containers do not float, and supports are not required. Heating is possible regardless of container shape, such as loosely covered containers like petri dishes or 96-well plates. ■Environmentally friendly Unlike constant temperature water tanks, there is no evaporation of water, which reduces power consumption. The aluminum used for the bead material is made from recyclable materials.

• others

The standard CR pump, which has a wide range of products, is suitable for almost all industrial solutions. Additionally, its modular structure allows it to accommodate a broader range of applications. The standard CR pump is available in four materials: cast iron, two different types of stainless steel, and all titanium. It offers 11 different flow ranges, a maximum pressure of 50 bar, various shaft seals, rubber materials, and supply voltages. Although the pump components are affected by various liquids or harsh operating conditions, they can be optimized for specific applications and designed for special requirements.

• pump

■Single suction pumps are used in applications such as water supply, industrial boosting, industrial liquid transfer, HVAC (heating, ventilation, air conditioning), and irrigation. ■Single suction pumps are versatile pumps that are highly reliable, cost-effective, and capable of handling various applications, primarily used in five areas: water supply, industrial boosting, industrial liquid transport, HVAC (heating, ventilation, air conditioning), and irrigation. ■NB/NBG pumps are non-self-priming single-stage centrifugal volute pumps equipped with a shaft-side suction inlet, a top discharge outlet, and a horizontal shaft, designed as direct-coupled pumps that comply with the main dimensions of EN733 or ISO2858 standards.

• pump

■ Powerful dehumidification ■ Temperature adjustment range 5 to 40℃ *Cooling function available only for R type ■ Easy operation to display temperature and humidity during operation ■ Remote control for switching between cooling/dehumidification operation *Cooling function available only for R type ■ Uses HFC refrigerant (R410A) with zero ozone depletion potential

• others

Savillex's PFA auto-sampler vials are compatible with many auto-samplers such as ICP, AA, and GFAA. They are made from high-purity PFA resin, eliminating the risk of impurity leaching and making them inert to almost all reagents, thus removing the risk of sample contamination. Additionally, their excellent liquid release properties allow for the complete recovery of samples without loss. Various sizes are available to fit common ICP auto-samplers, including the standard 12×32mm type PFA crimp vials.

• Analysis and prediction system

■ Achieves up to 57% energy-saving control Operation is possible with minimal energy according to the load. *Compared to HB control at 30% load. ■ High-precision liquid temperature control enabled by proprietary technology Control of the compressor speed based on liquid temperature detection achieves a setting temperature control of ±0.2 to ±1.0℃*. *This may vary depending on load conditions, so please consult us if high precision is required. ■ Wide range of liquid temperature control available Liquid temperature settings can be freely adjusted within the range of 5 to 35℃. ■ Standard external communication function Temperature control is possible via RS232C and RS422.

• others

Proportional operation according to the main signal. It automatically stops after a specified number of times and sends a completion signal.

• pump

This is a process pump that excels not only in corrosion resistance but also in pressure strength. It can be used with high-temperature chemicals up to 90°C and 100°C.

• pump

The SP submersible pump product range is renowned for its high efficiency and reliability. All SP pumps are made from corrosion-resistant stainless steel and can be used for various applications. The SP pumps are manufactured with cutting-edge fluid design to provide optimal efficiency during peak demand. They also promise long-term cost savings and reliable operation for all applications. Features of the SP product range include high efficiency, motor burn-out protection (through a combination of sensors and protective devices), and easy maintenance. A complete monitoring and control system allows for continuous optimization of the pump system.

• pump

■The tank is made of SUS304 material. The surface of the tank is finished with paint (metallic silver). The plugs for the cleaning and inspection holes are made of FC material. We also accept orders for SUS specifications, so please feel free to inquire. ■Ideal for industries that dislike rust, such as food, medical, and semiconductor industries.

• others

■Simply set it in the duct to easily supply dehumidified air. The unique expansion separation method achieves lightweight and compact design. Furthermore, it does not require a power source, allowing for easy supply of dehumidified air. ■Unique structure that follows flow rate fluctuations. It ensures reliable dehumidification performance even during fluctuations in flow rate and pressure, making it ideal for air management at the end point. ■Achieves maintenance-free operation. There is no clogging as it does not use filters. Additionally, the drain is automatically discharged from the auto drain trap.

• others

The SPK type immersion coolant pump is a bestseller for circulating and transferring coolant in machine tools. The stainless steel press processing of the main components provides excellent corrosion and wear resistance, while also achieving lightweight and high efficiency. Being a vertical immersion type, it can be installed on top of the tank without taking up space, and the immersion dimensions of the pump can be selected according to the depth of the tank.

• pump

It features an easy-to-grip design for easy removal from the rotor hole. It comes in a wide range of sizes compatible with various rotors. It is made from high-purity materials such as PPCO (PA), PC, PE, and PF. Available capacities are 10, 30, and 50 ml, with various options available. The sizes are 16×80, 25×92, 29×103, and round bottom.

• others

■ Adoption of stainless steel pressure vessels (400-1 and above). ■ Achieves high efficiency and stable separation efficiency. Utilizes an element filtration method, ensuring no decrease in separation efficiency due to fluctuations in flow rate. ■ Low pressure loss (below 0.005 MPa). ■ Expanded pressure range (75B to 250B). ■ Tie rod connection (75B to 250B). ■ Diameter selection available (400, 1000).

• others

It can be widely used for all types of chemicals. It is a compact type that eliminates waste, making it lightweight and easy to handle. Available in two materials: polypropylene and stainless steel, it has excellent corrosion resistance from strong acids and strong alkalis to solvents. It can accommodate medium viscosity liquids up to 10,000 mPa·s (for some models).

• pump

All major parts of the pump are made from titanium, which is lightweight, strong, and boasts extremely high corrosion resistance. It is suitable for applications involving the transfer and pressurization of highly corrosive liquids, including seawater.

• pump

This is an ideal automatic operation unit created by the combination of an all-stainless steel pump and motor with a control unit that boasts exceptional reliability. It is perfect for water supply in large residential buildings and parking lots that require relatively high flow rates. The control unit, which incorporates pressure and flow sensors, achieves a constant water volume and pressure with minimal pulsation.

• pump

■Grundfos TP and TPE vertical inline pumps can be used for various applications. All pumps are single-stage inline centrifugal pumps equipped with standard motors and mechanical shaft seals. These are close-coupled pumps where the pump and motor are independent units. Compared to similar canned rotor pumps, they have the advantage of being unaffected by impurities in the conveyed liquid. ■There are two models of vertical inline pumps. We offer a wide range of special product options for each model. 【TP Pump】 This pump is characterized by excellent reliability and high efficiency. For models with 7.5KW 4P and 11KW 2P or higher, a quiet IE2 motor with high-efficiency operation is standard. The pump body of the TP pump is coated with electrodeposition, ensuring excellent corrosion resistance. 【TPE Pump】 The main difference between the TP and TPE pumps is the motor. The TPE motor has a built-in frequency converter, allowing for different control methods to be applied. The TPE pump saves energy and enhances comfort.

• pump

Includes a sealing cap with an O-ring that provides excellent airtightness. Compatible with both angle and swing rotors. Made of PC and PPCO (PA) (nominal sizes: 250ml, 500ml, 650ml, 750ml, 1000ml; some are made of PP). Also available in fluororesin-based PF (polyfluoroethylene) (only 250ml). The cap supports the neck section, making it suitable for long-term centrifugation. The support ring for 500ml (optional) further reduces the load on the neck section. The shoulder has a gentle slope, making it easy to pour off the supernatant. Diameter of 39mm, flat bottom (not completely flat).

• others

We have two types of pump materials: polypropylene and PVDF. They are highly corrosion-resistant and maintenance-free.

• pump

It has a compact design that is small and lightweight. The robust drive mechanism ensures excellent durability. Due to the selection of corrosion-resistant materials, it can be used with various chemical liquids. The pump's discharge accuracy can be maintained within plus or minus 1%.

• pump

■Helps with the safe and efficient storage of liquid nitrogen. ■Easy handling of liquid nitrogen, suitable for daily use in laboratories. ■Durable container for long-term use. ■Allows for the extraction of small amounts of liquid nitrogen using a draw nozzle or dipper.

• others

Savillex's PFA vials are PFA containers made from high-purity PFA resin, ensuring no risk of impurity leaching and being inert to almost all chemical solutions. They are used in applications requiring extremely high purity, which sets them apart from other companies' PFA containers, such as sample preparation for trace element analysis like ICP-MS, storage of samples for traceability of high-purity acids and pharmaceuticals, storage of chemical solutions related to semiconductors, storage of soil samples for geological research, and storage of liquid samples for environmental surveys. They are also compatible with heating on hot plates, allowing for the storage of almost all acids. Due to their excellent liquid release properties, samples within the vials can be recovered without loss.

• Analysis and prediction system

Savillex's PFA microvials are made from high-purity PFA resin, eliminating the risk of impurity leaching and making them inert to almost all chemical solutions. Due to their excellent liquid release properties, it is possible to recover samples from the vials without loss. There are two sizes available: 0.5ml and 1.5ml, and the vial caps are thin, allowing for the insertion of a syringe needle. *Note: They are not designed for centrifugation.

• Analysis and prediction system

The Sabillex PFA standard test tubes are made from high-purity PFA resin, eliminating the risk of impurity leaching and making them inert to almost all chemical solutions. Due to their excellent liquid release properties, it is possible to recover samples from the container without any loss. Many of these PFA test tubes come with caps and are available in various sizes. In addition to having extremely low leaching of trace elements compared to glass test tubes, they have a wide temperature range and are resistant to breakage, making them highly convenient for use in the formulation and storage of various solutions.

• Analysis and prediction system

The PFA test tubes for block baths from Sabirex are designed to be compatible with block baths for pre-treatment decomposition tasks such as ICP trace element analysis. The walls are molded thinly and precisely to improve thermal conductivity and uniformity, and the test tubes with screw caps allow for the safe storage of samples that have undergone decomposition. *Care must be taken when handling due to the thin-walled design. They are manufactured from high-purity PFA resin, eliminating the risk of impurity leaching and making them inert to almost all chemical solutions. Due to their excellent liquid release properties, it is possible to recover samples from the container without loss.

• Analysis and prediction system

Savillex's PFA microcolumns come in various sizes and capillaries and are used for ion exchange chromatography. They are made from high-purity PFA resin and are inert to almost all chemicals. With excellent heat resistance and chemical resistance, and minimal trace element leaching, they are suitable for the semiconductor industry, pharmaceutical and food research, geological studies, and physical and chemical research. Due to their exceptional liquid release properties, it is possible to recover samples without loss. PTFE frits (sold separately) are also available for various capillaries.

• Analysis and prediction system

The Sabirex PFA decomposition container is designed for the pretreatment decomposition of trace element analysis such as ICP-MS. It can be placed directly in a microwave oven, allowing for a reduction in sample decomposition time. There are also containers with a flat bottom exterior suitable for heating on a hot plate. Unlike jars and other containers, the dedicated lid is molded into a screw shape (serrated) considering pressure resistance. Manufactured from high-purity PFA resin, it poses no risk of impurity leaching and is inert to almost all chemical solutions. Due to its excellent liquid release properties, samples can be recovered without loss. *In decomposition work under pressure, the temperature and pressure of the contents can become very high in a short time. This is particularly evident when working in a microwave oven. Please proceed with the correct usage and safety preparations.

• Analysis and prediction system

The Sabirex PFA single-layer filter holder is designed to set a PTFE membrane (sold separately) inside the main body and is used for high-purity monitoring and sampling of impurities in fluids, such as microparticles in liquid and gas transfer lines or gas sampling for environmental assessment. There are filter holders of various sizes corresponding to four membrane diameters (25, 47, 50, and 90 mm), and all fluid contact parts are molded from PFA except for the PTFE membrane. In addition to the single-layer type, there are also multi-layer types (only for membrane diameter 47 mm) that can accommodate multiple membranes, as well as various components that allow for the construction of unique filter holders.

• Analysis and prediction system