サンコー List of Products and Services

This is a monitor arm compatible with 27-inch monitors. The extension arm has been further refined to maximize desk space. When using it for PC operations, you can pull it closer to you, and when you want to free up desk space, you can move everything—monitor, keyboard, mouse, and even drinks—out of the way all at once.

This is a clamp-style arm that comes with a stand for a laptop and two trays. The laptop arm has a four-axis design, making it easy to change positions. You can also adjust the height and angle of the laptop. The computer stand and trays can be pulled closer when needed, and when you want to free up desk space, you can quickly move the entire laptop setup out of the way. The arm with the laptop stand is four-axis. It allows for precise position adjustments. The laptop stand can tilt approximately 30 degrees from horizontal. Additionally, the height of the arm can be easily adjusted.

Many customers are likely using metal racks as desks for their computers, but standard monitor arms cannot be used because they are designed to be clamped onto the surface of the desk. However, with the "4-axis clip monitor arm," you can install a monitor arm by clamping it onto poles with a diameter of 25 to 40mm, making it compatible with most metal racks. Using a monitor arm allows you to utilize the desk surface more efficiently, and when not needed, you can easily move it to the back. Why not give it a try? Installation is completed by clamping it onto the pole of the metal rack and tightening it with the included hex wrench. The installation part has rubber padding, so it can be attached without scratching the pole. When you remove the plastic cover at the joint, you will find a hex screw. The stiffness of each joint can be adjusted using the included wrench.

You can install dual monitors even on a desk with limited depth. This is a space-saving monitor arm that allows for vertical dual setups. It enables adjustment of angles up, down, left, and right.

This is a monitor arm that can install four monitors at once. The weight capacity for each is 10 kg, allowing for the installation of 27-inch monitors. You can use four LCD monitors either side by side or spaced apart.

This is a "4-axis flexible monitor arm" compatible with LCD monitors with a maximum load capacity of 10 kg. The sturdy, thick arm securely supports large monitors! The 4-axis arm allows for front and back movement without significant lateral swinging, increasing the freedom of monitor placement. Additionally, it enables easy 360-degree rotation of the monitor, secure clamping with two clamps, and height adjustment, making it a budget-friendly monitor arm that rivals expensive options! Available in two colors: black and white.

This is a "3-axis flexible monitor arm" compatible with LCD monitors with a maximum load capacity of 10 kg. It is quite sturdy and well-built, providing solid support for larger monitors! Additionally, it allows for 360-degree rotation of the monitor, easy height adjustment, and features two clamps for secure attachment, making it an inexpensive monitor arm that rivals more expensive options! Available in two colors: black and white.

Monitor stand - dual model. This monitor stand is compatible with LCD monitors up to approximately 78 cm wide (under 8 kg). It also includes a clamp that can be attached to a desk hole. Additionally, the width between the monitors can be adjusted by sliding, and the height of the arms can also be changed.

This is a monitor arm that can accommodate a laptop stand and a 27-inch monitor. By using this product, you can avoid placing your laptop on the desk, allowing for more efficient use of space. Additionally, the arm's fastening parts are separate, enabling you to adjust the height of the laptop and the LCD monitor individually. Furthermore, the laptop arm can also be used as a monitor arm by removing the top plate.

Many customers are likely using pole racks as desks for their computers, but standard monitor arms cannot be used because they are designed to be clamped onto the surface of the desk. The "4-axis monitor arm pole mount" is a monitor arm that can be installed by clamping onto poles with a diameter of 15 to 30mm, making it usable in various locations. Furthermore, using this monitor arm allows for a more spacious desk surface, and it can easily be moved back when not needed. Why not give it a try?

This is a gas shock swivel monitor arm compatible with 27-inch wide monitors. Thanks to the gas shock mechanism, the height can be easily adjusted to suit the user. By moving the arm, you can make efficient use of space even on desks with limited depth. The joint can bend over 180 degrees, allowing for a variety of arrangements.

The joint part of the arm can overlap and fold, making it possible to install two monitors side by side, which was difficult with conventional products. Since the joint can bend over 180 degrees, it allows for the desired monitor arrangement. This is an 8-axis monitor arm for two dual screens with four axes. It extends forward about 400mm from the pole, and when the monitor is lowered to the back while facing forward, the multi-segment arm folds while overlapping, lowering to 105mm from the pole. (This may vary depending on the monitor size and angle.)

This is a monitor arm that allows for spacious use even on a desk without depth by moving in four axes.

You can install three monitors vertically in the space of one monitor, allowing for a space-saving triple monitor setup and a spacious desk. Not only can you install three monitors vertically, but you can also use only two of the three short arms to set up two monitors in a vertical position. Additionally, by combining two or three of these arms and installing them on the left and right, you can create layouts for larger monitors with four, six, or nine screens. Of course, it can accommodate various situations such as adjusting the height and tilt angle (upward/downward) of each monitor, as well as panning (side-to-side movement) and rotation. Monitors can be rotated 360 degrees (pivot rotation), and the LCD can be used in either portrait or landscape orientation. This product is compatible with VESA standard monitors and can be mounted to VESA standards of 75mm x 75mm or 100mm x 100mm.

The LCD monitor stand can be attached to VESA-compatible LCD monitors. By installing it, you can easily adjust the height and angle. Additionally, the stand weighs approximately 2.5 kg and features anti-slip material on the entire back side, which helps prevent large monitors from tipping over.

The monitor angle adjustment and orientation are possible. It is made entirely of metal and can support up to 10kg, providing peace of mind. The desk rack is very useful for placing a keyboard underneath and small items on top. It can also be used on desks where clamps cannot be used. You will be able to secure more desk space than ever before.

This is a medical PC cart that is easy to move with four casters. It has a weight capacity of 4 kg and is compatible with 24 to 27-inch monitors. It comes with a keyboard tray and mouse table that can be slid in and out. The most notable feature is the height adjustment, which can be done effortlessly by simply stepping on a pedal. The four large casters provide stability and smooth movement. Additionally, the top of the desk slides, allowing you to store documents or a laptop while only exposing the monitor section.

This is a VESA-compatible mobile large TV stand that can accommodate televisions and monitors with a maximum size of 800×600mm. Even if set horizontally, the part where the TV is mounted can rotate 90 degrees, allowing for easy and quick adjustment to a vertical position. It offers a wide height adjustment range, from approximately 180cm at maximum to about 110cm at minimum. A table for placing devices like DVD players is included with the stand, and the stand's legs are equipped with four casters, making it easy to move around. This mobile large TV stand is sure to be highly effective in various situations, such as meetings, presentations, demonstrations at exhibitions, and as digital signage at receptions or storefronts.

This is a TV stand that allows for stepless height adjustment of the TV using electric power. Both wireless and wired remote controls are included. A convenient top shelf is also included.

This is a monitor arm that has a sense of luxury, is heavy-duty, and durable. It features a gas shock mechanism, allowing for smooth vertical adjustments. It can accommodate monitors weighing between 2 to 8 kg. By attaching a separately sold USB extension cable to the monitor arm itself, you can install a USB port in a convenient location without obstruction. *Please note that installation may not be possible with USB cables other than those specified by our company. We also offer a premium USB extension cable for the monitor arm (set of 2).

This is a high-end, sturdy, and durable monitor arm. It features a gas shock mechanism, allowing for smooth vertical adjustments. It can support displays weighing between 2 to 8 kg on two surfaces. By attaching a separately sold USB extension cable to the monitor arm itself, you can install a USB port in a convenient location without it being in the way. *Please note that only our designated USB cables may be compatible for installation. We also offer a premium USB extension cable for the monitor arm (set of 2).